The Top Mitsubishi Galant VR-4 Resource

Join the best E39A 1991-1992 Mitsubishi Galant VR-4 community and document your GVR4 journey.

  • Software Upgraded - Reset Your Password to Login
    In order to log in after the forum software change, you need to reset your password. If you don't have access to the email address you used to register your GVR4.org account, you won't be able to reset your password. In that case, follow the instructions here to regain access to the forum.

intercooler piping, 2.5 in

yubh8tn

Well-known member
Joined
Aug 21, 2019
Messages
223
Location
coeur d alene, idaho
Hey, I'm trying to upgrade all of my intercooler piping to 2.5 inch, but I don't want to use reducers on the TB elbow or the turbo outlet. It's easy enough to find aftermarket TB elbows, but I cant find a 2.5 inch turbo outlet. Anybody know where to get one?

If not, how should I run my piping so there's not a massive reducer coming straight off the turbo right next to the exhaust?
 

JNR

Well-known member
Joined
Apr 23, 2004
Messages
9,814
Location
ca
You will need to use some sort of reducer on either end...they make silicone coupler reducers, although a longer transition would be helpful on the throttle body side. You'd want to look for concentric tubing reducers in that case and weld to your 2 1/2" tube. Don't forget to put a bead on the exit end, or else risk not sealing or even holding it on (i.e. pop off) under pressure (boost).
 
Support Vendors who Support the GVR-4 Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications RixRacing RockAuto RTM Racing STM Tuned

Recent Forum Posts

Top