The Top Mitsubishi Galant VR-4 Resource

Join the best E39A 1991-1992 Mitsubishi Galant VR-4 community and document your GVR4 journey.

  • Software Upgraded - Reset Your Password to Login
    In order to log in after the forum software change, you need to reset your password. If you don't have access to the email address you used to register your GVR4.org account, you won't be able to reset your password. In that case, follow the instructions here to regain access to the forum.

Fuel sender feed line thread size? (AN fitting)

CP

Well-known member
Joined
Aug 30, 2004
Messages
8,938
Location
West Simsbury, CT
Quoting jepherz:
Actually, if you look at the picture CP posted, it looks to me like there was even teflon tape on the hose fitting, between the red and blue anodized pieces.



I think that was what caused the fitting to crack. But it appears to me that winter road salt got in there and was eating away at the inside of the fitting. It's totally fubar'd and is half the diameter of a new fitting...no threads at all left in that area, just metal rot.
 

CP

Well-known member
Joined
Aug 30, 2004
Messages
8,938
Location
West Simsbury, CT
All fixed and running again with no leaks /ubbthreads/images/graemlins/applause.gif I forgot that fuel expands when it gets warmer, as the outside temps rose a good 25* here today. So I came home to a nice big puddle of fuel underneath the car from the open sender tube. DOH!
 
Support Vendors who Support the GVR-4 Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications RixRacing RockAuto RTM Racing STM Tuned

Recent Forum Posts

Top