The Top Mitsubishi Galant VR-4 Resource

Join the best E39A 1991-1992 Mitsubishi Galant VR-4 community and document your GVR4 journey.

  • Software Upgraded - Reset Your Password to Login
    In order to log in after the forum software change, you need to reset your password. If you don't have access to the email address you used to register your GVR4.org account, you won't be able to reset your password. In that case, follow the instructions here to regain access to the forum.

FS: Built 6-Bolt Head - Price Drop $1000

holeshotmoe

Well-known member
Joined
Apr 7, 2005
Messages
1,291
Location
MD
New:
-Ferrea EVO 8 dual spring kit with titanium retainers $900+
> S10084 dual springs, E11052 retainers, SL1041 seats, K10035 locks
-Supertech 2mm oversize nitrided intake valves $150+
-Supertech 2mm oversize inconel exhaust valves $160+
-Supertech valve guides $100
-Supertech viton valve stem seals $30
-Titanium exhaust studs $100+ (Speed Factory IIRC)
-Ported intake and exhaust
-5 angle valve job.
= = = = =
Best part prices I could find totaled over $1400
NO cams, gears, lifters, rockers, HLA
Located Germantown, MD
Will ship at cost
Can bring to Haltech World Cup Finals in Maryland
= = = = =
I bought this for my new short block, but couldn't use it because of clearance issues with 9.0:1 pistons.
I lightly torqued it to my block on a engine stand to check piston clearance only.
Let me know if you want additional pics
Killer deal!

















B
 
Last edited:

holeshotmoe

Well-known member
Joined
Apr 7, 2005
Messages
1,291
Location
MD
A few more pictures from when I was seeing if it would work on my buildIMG_0826.JPGIMG_0833.jpgIMG_0836.JPGIMG_0837.JPG
 

holeshotmoe

Well-known member
Joined
Apr 7, 2005
Messages
1,291
Location
MD
Bump for price drop. I love looking at this on the shelf, but it's too nice for art work!
 

SparxXVR4

Well-known member
Joined
Oct 8, 2023
Messages
51
Location
Washington State
New:
-Ferrea EVO 8 dual spring kit with titanium retainers $900+
> S10084 dual springs, E11052 retainers, SL1041 seats, K10035 locks
-Supertech 2mm oversize nitrided intake valves $150+
-Supertech 2mm oversize inconel exhaust valves $160+
-Supertech valve guides $100
-Supertech viton valve stem seals $30
-Titanium exhaust studs $100+ (Speed Factory IIRC)
-Ported intake and exhaust
-5 angle valve job.
= = = = =
Best part prices I could find totaled over $1400
NO cams, gears, lifters, rockers, HLA
Located Germantown, MD
Will ship at cost
Can bring to Haltech World Cup Finals in Maryland
= = = = =
I bought this for my new short block, but couldn't use it because of clearance issues with 9.0:1 pistons.
I lightly torqued it to my block on a engine stand to check piston clearance only.
Let me know if you want additional pics
Killer deal!

















B
I have scrolled by this a few times, and I keep looking over at the wife, asking my self... "would she be mad" lmao. I am pondering, and if not, BUMP for a solid foundation of a head.
 

holeshotmoe

Well-known member
Joined
Apr 7, 2005
Messages
1,291
Location
MD
A few people asked why I couldn't use the head, so here is a short description...
= = =
Pistons are HERE. First I checked the clearance with hks 264/272 cams. It was a no go because both intake and exhaust valves hit the pistons. Next I tried with stock cams, but I still couldn't get the .030" I needed on the exhaust side. IIRC, I think I only had like .005" to .010". Someone told me I could get the piston valve pockets "fly cut" to make room for the bigger valves. But the short block was already assembled, so I wasn't going that route. Then I was thinking I might be able to get some space with adjustable cam gears. 🤔 Well for one, the diameter of the valve face extended outside the pocket, so I was thinking maybe that wouldn't even work. But beyond that, I didn't know whether jacking around dialing in the cams (i.e., timing) would negatively affect power potential. Plus I was running out of time to get it together. So I rebuilt my stock head, and tested it with the 264/272's and I had the space needed. Below are some pictures where you can see the valve face extending outside the cutouts in the piston.IMAG0299.jpgIMG_1091.JPGIMG_1092.JPGIMG_1099.JPGIMG_9336.PNG
 
Support Vendors who Support the GVR-4 Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications RixRacing RockAuto RTM Racing STM Tuned

Recent Forum Posts

Top