The Top Mitsubishi Galant VR-4 Resource

Join the best E39A 1991-1992 Mitsubishi Galant VR-4 community and document your GVR4 journey.

  • Software Upgraded - Reset Your Password to Login
    In order to log in after the forum software change, you need to reset your password. If you don't have access to the email address you used to register your GVR4.org account, you won't be able to reset your password. In that case, follow the instructions here to regain access to the forum.

FS: 1992 VR4, 324/1000, 134,xxx miles - Bozeman, MT $4000obo

324vr4

Well-known member
Joined
Apr 28, 2006
Messages
1,240
Location
Bozeman, Montana
I have a great purpose built autocross car that is 99% done in Belize Green drab. Runs strong, drives well, and here's what it has:

Muscle: 1000 miles

8.5:1
JE Pistons
Ross Rods
ARP Hardware all around
SS Fuel Line & Clutch Line
Vacuum Manifold
AFPR, Walbro 255 with relay kit
4-ply Si Charge Hoses
2.5" Charge pipes
e3 Exhaust Manifold
3" turbo back exhaust
MHI e316g with less than 500 miles
17x35x3.5 A2A Intercooler
Honda Race Radiator with wired in 14" 2750cfm slim fan
Mobil 1 5w30
Redline Fluids througout

Agility:

EVO8 front & rear springs and struts
eBay Rear Strut Tower Bar
ACT 2600 Cluth
ACT Lightened Flywheel
Delrin Shifter Bushings
Short Shift Kit

Brains:

Innovative WB
Keydiver Chip, Stg 3, still have original too
AutoMeter Phantom II: Boost (30vac, 30psi), Oil Pressure (Mech), Fuel Pres
Prosport: Water Temperature
Apexi TT

Appearance:

Sit's even on all corners
17x7.5 Lightweight Wheels on Nitto 555s: less than 200 miles)
-OE Wheels, all with tires
Gutted interior with no OE interior left (All sold here)
CF everywhere
Optima Yellow Top
Race Harnesses
D&P Corbeau Ultra Light bucket seats
'89 Dash Conversion
Removed sunroof, replaced with lexan
Removed PS, ABS, 4WS

Accessories:

JDM Tailights
JDM IC Scoop
Non-Powered Mirrors with all trim still in box
Manuals
Timing Belt tools
Misc. Turbo Parts
BNIB Ingralls Alignment Bolts
Autometer EGT Gauge with probe



I would like to get $5k for this thing with everything put into it and all of it being not even broke in. I ran out of time and money and moved out of state so it's sitting at my buddy's shop. I'm aggressively trying to sell this so please someone take it so it stays in the community and not just wrecked and forgotten...It's runs well, it does however need a couple things to make it track ready:

Power steering rack leaks more than I wish it did. A new manual rack would be ideal for this thing, just haven't had the time to do it. Another issue is there is an ever so slightly oil leak. It is a brand new motor and all new gaskets were replaced...It's in one of two spots, the front case needs to be resealed, or the rear main is the culprit...I haven't been able to get under it to determine exactly where it's coming from...Mind you these are issues not changing the way the car performs. It' fast and hooks up well...Check it out:













Let me know if you're interested. Call and leave a message or text me at: 406-595-4874

Ryan
 
Last edited:

NinjaVR4

Well-known member
Joined
Mar 16, 2011
Messages
68
Location
Salt Lake, UT
pm sent. Ill send you a text message
 

324vr4

Well-known member
Joined
Apr 28, 2006
Messages
1,240
Location
Bozeman, Montana
Yes it is...I haven't got a lot of interest in this car in MT so if I cannot get rid of it by May 20 where it is, I'm trailering it to WA for better luck.

Email me for details: [email protected]
or call me at: (406) 595-4874
 
Last edited:

GSX_TC

Well-known member
Joined
Apr 7, 2011
Messages
3,722
Location
Houston, Texas
Carbon fiber everywhere? Can u be more specific with this one?
 

324vr4

Well-known member
Joined
Apr 28, 2006
Messages
1,240
Location
Bozeman, Montana
CF speaker gauge pod, CF arm rest, CF blinker intake scoop, CF center consoul gauge holder (where stereo and aux gauges could go)...to be specific

Does NOT have a CF hood or trunk...just interior bits.

 
Last edited:

GSX_TC

Well-known member
Joined
Apr 7, 2011
Messages
3,722
Location
Houston, Texas
I like that carbon fiber arm rest, whered you get that?
 

324vr4

Well-known member
Joined
Apr 28, 2006
Messages
1,240
Location
Bozeman, Montana
Made it...took the original leather off and wrapped it in CF...

Car is again tentatively sold locally... /ubbthreads/images/graemlins/smile.gif
 

GSX_TC

Well-known member
Joined
Apr 7, 2011
Messages
3,722
Location
Houston, Texas
Nice can u pm me who wrapped it for u
 

324vr4

Well-known member
Joined
Apr 28, 2006
Messages
1,240
Location
Bozeman, Montana
No need to PM you...my brother did it...bought some CF fabric, covered it in FG hardener and let it sit...it's hard as hell and shows the CF weave nicely...cost about $4 to make...look on eBay for the fabric or go to an upholstry shop and buy 2.25 square feet of it (18"x18") and the FG hardener is next to nothing at any hardware store.
 
Support Vendors who Support the GVR-4 Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications RixRacing RockAuto RTM Racing STM Tuned

Recent Forum Posts

Top