The Top Mitsubishi Galant VR-4 Resource

Join the best E39A 1991-1992 Mitsubishi Galant VR-4 community and document your GVR4 journey.

  • Software Upgraded - Reset Your Password to Login
    In order to log in after the forum software change, you need to reset your password. If you don't have access to the email address you used to register your GVR4.org account, you won't be able to reset your password. In that case, follow the instructions here to regain access to the forum.

FS: 16x9 4x114.3

Olson

Well-known member
Joined
Oct 7, 2006
Messages
1,237
Location
Moreno Valley CA
300$ only 2 rims left
Real Racing rims
16x9 4x114.3
15lbs
Will clear stock rotors
One rim has a little bit of rash on it nothing you or I couldn't take care of
#3 had these for a bit








 
Last edited:

Olson

Well-known member
Joined
Oct 7, 2006
Messages
1,237
Location
Moreno Valley CA
Buy them!
 

Olson

Well-known member
Joined
Oct 7, 2006
Messages
1,237
Location
Moreno Valley CA
Shoot me a price in pm
 

Olson

Well-known member
Joined
Oct 7, 2006
Messages
1,237
Location
Moreno Valley CA
little price drop
 

Olson

Well-known member
Joined
Oct 7, 2006
Messages
1,237
Location
Moreno Valley CA
Wished i could have used them. When i got them from you i was excited as hell dude. Bigger and better things i guess
 

Olson

Well-known member
Joined
Oct 7, 2006
Messages
1,237
Location
Moreno Valley CA
SO i think i did it right. Its a 30 offset.
the rim is 250mm wide
with a 125 centerline
a 155 back space
that gives us a 30 offset?

Correct me if im wrong on this
 

iceman69510

Turn Right Racing
Staff member
Joined
Mar 5, 2001
Messages
10,964
Location
Michigan
Probably close. Offset is from wheel centerline to mounting face based on stated wheel width, which is bead to bead (inside), whereas backspacing is from outside rim width to mounting face.

Is the 250 width you state the outside to outside of wheel measurement? Then the 30 should be accurate.
 

Olson

Well-known member
Joined
Oct 7, 2006
Messages
1,237
Location
Moreno Valley CA
Outside width Iceman
 

Olson

Well-known member
Joined
Oct 7, 2006
Messages
1,237
Location
Moreno Valley CA
Anyone else want to throw me a good offer
 

Olson

Well-known member
Joined
Oct 7, 2006
Messages
1,237
Location
Moreno Valley CA
I have not ran these rims as stated in the first post.
Tire sizing a depended on what you want to do. use drag radials. Dot tires, race slicks. i planed on running some slicks on the car for track days but went a different direction.
So as far as i know no rub depends on what size tire you run what type spring rates you run what type of a fender you run.
What size tire i ran. I didnt run a tire but there are alot of options out there
 

Olson

Well-known member
Joined
Oct 7, 2006
Messages
1,237
Location
Moreno Valley CA
Bump.
These rims will Fit on stock 4 lug galant knuckles !!
 

Olson

Well-known member
Joined
Oct 7, 2006
Messages
1,237
Location
Moreno Valley CA
WELL..... kinda. if they are still posted for sale they are still for sale
 
Support Vendors who Support the GVR-4 Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications RixRacing RockAuto RTM Racing STM Tuned

Recent Forum Posts

Top