Snook1345
Active member
Picked up 747 about a year and a half ago and since then have been hoarding parts to build it. (original sale post Link)
I finally have reached the point where i can begin to install everything that I have and see what breaks first.
As it sits, the car currently has 144k on the odometer and the motor is tired.
The trans seems okay and still shifts good, so i think i will just install a clutch for now.
Has Evo 8 Seats (courtesy of Mike Gombos), Evo III 16g, Turbo back, bc coilovers, xxrs, supra fuel pump
I started a few months ago by sourcing a 4 bolt rear end from Performance Partout.
Had new rear end installed, new axles, new bearings and bushings
Here is a parts list of what i have ready to go on the car
BBS LM F1 Championship Edition 17x9+35
werapped in Kuhmo Ecsta v720 tires
5 Lug Swap w all new bearings and seals
New F/R Rotors
New F/R Calipers/Pads
Extended Studs/Open End Lug Nuts
Threespeed Harness Bar
Fuel Pump Rewire
Aem Gauges (bought an extra D/side a pillar so i didnt have to hack my oem)
Momo Comp Steering Wheel
NRG Hub/ Quick Release
ETS FMIC
Cyclone Intake Manifold
CMP full turbo back
New Radiator w fans
ACT 2600
Crower Cams Stage 2 272/272
ARP L19 Head Stud Kit
Fidanza Adjustable Cam Gears
Topline Revised Lifters
Cometic StreetPro Gasket Kit
Gates Economy Timing Belt Kit
Manley Valve Spring & Retainer Kit
FIC 850cc Fuel Injectors
The motor is currently apart and about to go back together once a few more things arrive.
Still Need to get
DSM Link waiting to see if i can find an ETS intake
As i do stuff i will try to take pictures and update as much as possible
I finally have reached the point where i can begin to install everything that I have and see what breaks first.
As it sits, the car currently has 144k on the odometer and the motor is tired.
The trans seems okay and still shifts good, so i think i will just install a clutch for now.
Has Evo 8 Seats (courtesy of Mike Gombos), Evo III 16g, Turbo back, bc coilovers, xxrs, supra fuel pump
I started a few months ago by sourcing a 4 bolt rear end from Performance Partout.
Had new rear end installed, new axles, new bearings and bushings
Here is a parts list of what i have ready to go on the car
BBS LM F1 Championship Edition 17x9+35
werapped in Kuhmo Ecsta v720 tires
5 Lug Swap w all new bearings and seals
New F/R Rotors
New F/R Calipers/Pads
Extended Studs/Open End Lug Nuts
Threespeed Harness Bar
Fuel Pump Rewire
Aem Gauges (bought an extra D/side a pillar so i didnt have to hack my oem)
Momo Comp Steering Wheel
NRG Hub/ Quick Release
ETS FMIC
Cyclone Intake Manifold
CMP full turbo back
New Radiator w fans
ACT 2600
Crower Cams Stage 2 272/272
ARP L19 Head Stud Kit
Fidanza Adjustable Cam Gears
Topline Revised Lifters
Cometic StreetPro Gasket Kit
Gates Economy Timing Belt Kit
Manley Valve Spring & Retainer Kit
FIC 850cc Fuel Injectors
The motor is currently apart and about to go back together once a few more things arrive.
Still Need to get
DSM Link waiting to see if i can find an ETS intake
As i do stuff i will try to take pictures and update as much as possible