The Top Mitsubishi Galant VR-4 Resource
Join the best E39A 1991-1992 Mitsubishi Galant VR-4 community and document your GVR4 journey.
- Software Upgraded - Reset Your Password to Login
In order to log in after the forum software change, you need to reset your password. If you don't have access to the email address you used to register your GVR4.org account, you won't be able to reset your password. In that case, follow the instructions here to regain access to the forum.
#996/1000
- Thread starterunistylef
- Start date
unistylef
Well-known member
Quoting GSTwithPSI:
What branch of the military are you in?
Navy Submarines! Cant wait to autox here in SD.
What branch of the military are you in?
Navy Submarines! Cant wait to autox here in SD.
unistylef
Well-known member
Damn. 91 octane? Really?
GSTwithPSI
Well-known member
Lolz. Welcome to California. That's just the beginning, wait until you have to pass smog with your car. Get ready to shell out a hefty bribe. That's is, if you are lucky enough to find a tech who will hook you up.
unistylef
Well-known member
Btw, can anyone tell me when there will be a meetup in socal? I am eager to meet people and learn more.
mitsuturbo
Well-known member
Nice looking car. What brackets did you use to mount the 3k calipers?
I'm trying to go the 3k/cobra route, and it's not working out too well trying to get the calipers to clear the 5zigen FN01r's. I got them to clear, but there's literally less than 1mm of clearance and i don't want to drive it like that. If a wheelbearing starts to go, or even if something flexes a little, i fear it will cause damage to parts. I'm actually thinking about having the caliper modified a bit at a machine shop, because i think i've taken off as much material from the outer face of the caliper and still consider it safely functional.
I think in the end i'm just going to go with a TCE Wilwood setup. Ugh.. so expensive!
I'm trying to go the 3k/cobra route, and it's not working out too well trying to get the calipers to clear the 5zigen FN01r's. I got them to clear, but there's literally less than 1mm of clearance and i don't want to drive it like that. If a wheelbearing starts to go, or even if something flexes a little, i fear it will cause damage to parts. I'm actually thinking about having the caliper modified a bit at a machine shop, because i think i've taken off as much material from the outer face of the caliper and still consider it safely functional.
I think in the end i'm just going to go with a TCE Wilwood setup. Ugh.. so expensive!
faqinshiet
Well-known member
Meets? I'm not sure but there are the races at Qualcomm on Fridays last week was awd night supposedly.
unistylef
Well-known member
Qualcomm on fridays... I'll have to check it out. Makes me want to get a 4 Bolt now. I will post here when I decide to go to Qualcomm, it'd be totally awesome to see other gvr4s/ 4g63s out there...
unistylef
Well-known member
Seeking someone in the area to help me with ECM V3 tuning. I have been reading and watching videos, but I would like a knowledgable person aside so I don't mess things up.
Thank you! I live in the downtown area of SD, but am willing to drive a decent amount.
Thank you! I live in the downtown area of SD, but am willing to drive a decent amount.
KiNgMaRtY
Well-known member
Welcome to California! The majority of the great 4G63 Tuners are in OC/LA.
CutlassJim
Well-known member
Dude get some more pictures of this beauty up!
unistylef
Well-known member
Ya ya... I need to get it cleaned... I installed that stage 1 badge in the engine bay. I got HIDs installed... waiting for yellow ones for my fogs. I also submitted a job to get those signatures made into decals. I really want to bring this thing to a body shop and get it all fixed up and painted... but that's after I get all the more important things done first. Shits becoming more expensive, with all the real life expenses kicking back in again. This year was all about being able to spend my entire paycheck on whatever... now I have to put stuff aside to buy a house. Anyhoo, yea... need to clean the car, then I'll do some nice pics.
Actually, I want to get together with other VR4's in the Socal area. That'd be some good photos.
Actually, I want to get together with other VR4's in the Socal area. That'd be some good photos.
unistylef
Well-known member
SouthCaliVR4
Well-known member
Hit me up on pm I have a good extra four bolt w/axles & cups, one inner boot is torn. happened while removing it under less than Ideal circumstances. I'm down in sd a lot, could drop it off to you.
unistylef
Well-known member
Video of car's characteristics prior to it's upcoming power increases.
Last edited:
SSGdave
Well-known member
HAY! where do those mud guards come from?
I WOULD LOVE A SET OF THEM!!!
I WOULD LOVE A SET OF THEM!!!
Last edited:
unistylef
Well-known member
Came with the car. If I ever take them off though, I already have someone to give them to. I didn't realize it was uncommon to have these.
idreamidrive
Well-known member
Just noticed this thread.
Have you been auto-xing down here yet? I would love to see what a set up car is like as mine is stock and is a fricking pig out there. I haven't auto-x'd with scca, but with sdbmwcca.
Please tell me you are keeping your car registered in your home state so you don't have to do the smog crap here.
Have you been auto-xing down here yet? I would love to see what a set up car is like as mine is stock and is a fricking pig out there. I haven't auto-x'd with scca, but with sdbmwcca.
Please tell me you are keeping your car registered in your home state so you don't have to do the smog crap here.
JamesFoster
Well-known member
Quoting unistylef:
Seeking someone in the area to help me with ECM V3 tuning. I have been reading and watching videos, but I would like a knowledgable person aside so I don't mess things up.
Thank you! I live in the downtown area of SD, but am willing to drive a decent amount.
I had my car tuned by Beau Brown, I believe he's in the LA area. He works for AEM and really knows his stuff, I would highly recommend him. He met me at a nice shop in Montclair that has an AWD dyno, tuned the car and I paid the shop $200 and him $200. His number is (310)947-6329.
Btw, car looks great, welcome to Cali! Nice to have another VR-4 owner here.
Seeking someone in the area to help me with ECM V3 tuning. I have been reading and watching videos, but I would like a knowledgable person aside so I don't mess things up.
Thank you! I live in the downtown area of SD, but am willing to drive a decent amount.
I had my car tuned by Beau Brown, I believe he's in the LA area. He works for AEM and really knows his stuff, I would highly recommend him. He met me at a nice shop in Montclair that has an AWD dyno, tuned the car and I paid the shop $200 and him $200. His number is (310)947-6329.
Btw, car looks great, welcome to Cali! Nice to have another VR-4 owner here.
Last edited:
