The Top Mitsubishi Galant VR-4 Resource

Join the best E39A 1991-1992 Mitsubishi Galant VR-4 community and document your GVR4 journey.

  • Software Upgraded - Reset Your Password to Login
    In order to log in after the forum software change, you need to reset your password. If you don't have access to the email address you used to register your GVR4.org account, you won't be able to reset your password. In that case, follow the instructions here to regain access to the forum.

Search results for query: *

  1. Thread paint for underbody

    Does anyone know what type of paint is used on the OEM fasteners? I'd like to do this on my cars for corrosion resistance.-Alex
  2. FS: Ralliart VCU

    I have a line on a Ralliart VCU for $480 if anyone is interested. I would take paypal up front. It's brand new in wrapper.
  3. FS: Misc Evo parts Evo 1,2,3, 5

    I have a very nice clean Evo 5 steering rack that will bolt into an early Evo for a quicker steering ratio (roughly .5 turns less lock to lock. $200Evo 3 Brake booster- perfect condition $40Lots of bombaklatt crank pulleys that are dirty but in useable condition. $20 eachGalant/Early Evo...
  4. FS: 1g Cylinder head complete with Valves

    Used, never machined as far as I know. Been in storage for 8 years. I can post pics if anyone is interested in it. Give it a good cleaning dip and decking and it's ready to rock. The head could be flat I haven't checked. It wasn't removed due to damage.$200 plus ship. No cams.accepting...
  5. FS: Evo 5 steering rack $150

    I bought a couple of Evo 5 steering racks for my Evo II. I don't need both. If anyone here has an early evo these bolt on and reduce lock-to-lock by 1 turn. It is right hand drive so probably not suitable for US cars. I think 2.3 turns lock to lock versus the 2.8 for the standard Evo 1-3...
  6. FS: Big Brake kit 12.19" Aluminum Hats, 3000gt Sumitomo Calipers $400 plus ship

    I have a front brake kit for sale from my Evo II- I've been using it at the track for a long time and the car has reached a state of development that requires more than this. I'm asking $400 for the following parts:2 sets of rotors and hats. One set used, the other never used (kept as spare)...
  7. FS: Evo 8 Parts and Walbros

    Hi Guys, I know that some of you have moved to Evo 8s. I've been spending time in my garage prepping my car for Climb to the Clouds and I have a lot of spare parts I can sell and not miss. PRICES DO NOT INCLUDE SHIPPINGEvo 8Throttle body with TPS- 25 Cam angle sensor with housing $25 Rear...
  8. CAS Pinout

    Can someone post a pic from the manual or elsewhere that shows the CAS pinout for a 1g CAS? I can't find a thread or a good Google image for it. Also, if it's homemade let me know if it's wire-side view or connector face view or component view etc.Thanks a lotAlex
  9. FS: DSG Shift knobs - Delrin. Threaded for Galant

    I have three white and 4 black left. This will be it since we've closed for good. These are made in USA, used on Pastrana's old Subaru as well as many other well known Rally America and X Games competitors.$50 shipped anywhere in the US. Paypal and inquiries to [email protected]
  10. FS: CT9A parts Drivetrain parts, shift knobs, Evo III badge misc.

    Dudes- I have some stuff in the garage that I need to move out.. Everything is in good shape.Starting with Evo 8 Stuff-Driveshaft 3rd pc not shown but I have it.. $100FR Axle- $100Rear axle- $100
  11. FS: Factory Manual For Galant E39A including VR4

    Factory Manuals for Galant- Body/Mechanical and Electrical (2) books.Cover is ripped on one. They're in used but decent condition. Obviously out of print.Asking $40 plus 10 ship.I don't come on here much so best to email [email protected] is the same.
  12. FS: SARD 800cc Injectors- direct perfect fit for 4G63

    I've been using these for a few years. I'm going to get ID 1000 Bosch injectors for this season. Offering these for sale at $300/Set of 4. Shipping included.. does not come with fuel rail etc..Perfect condition. Made by SARD.
  13. Surface finish on block - useable or no?

    Hi Guys, I'd like a consensus on this one. A customer brought me this motor to be built. He had it machined in his town. What do you think about this surface finish with a metal headgasket? I can stripe it with my fingernail. It's nice and consistent but the grooves are deep. Please let me know...
  14. FS: Apex-i Power FC for CT9A Evo, new with hand controller

    Originally made for the Evo 7. This is compatible with Evo VIII with small repinning mods to harness. I have an adapter harness for $200 extra from Apexi to run this on an Early Evo 1-3.Hand controller and ECU are brand new. This is a full stand-alone system, not OBD II compatible. This can...
  15. parts compatibility on engine build- mostly regarding rod dims

    I just had an unfortunate epiphany on the way home from work.I bought a 6 bolt 94mm stroker crank for my new build using a 6 bolt block.So far so good.My normal piston supplier has 2g style forged pistons for to accommodate that crank with it's offset wrist pin. I thought I would be...
  16. Eagle crank 94mm stroke- couple of questions on bearings and oil squirters

    1) I know that people have squirter issues with the 100mm stroke crank. Can I run unmodified 1g squirters on my 6 bolt with the 94mm (2.2) stroke crank assuming that I have chosen pistons with a large enough relief?2) I see a link that states Clevite bearings must be used with these cranks...
  17. Can someone do some maths for me? Piston speed calculation

    I did a little boo boo this weekend at Duryea hillclimb and over spun my motor. I knew it was high but I didn't know how high. Anyway the engine still runs but the oil squirter got taken out and bent the piston skirt a little which left an aluminum skid mark on the cylinder wall. Not sure if...
  18. WTB: 2.4 6 bolt crank. Mitsu or Hyundai

    Anyone have a non-reground one? Pondering new motor building options.Please let me know!Alex
  19. FS: Wiseco Pistons 1G 85mm bore 8.3:1 Comp. Brand new with rings

    New in box. Never touched. Coated skirts too. Retails for about $700.I will sell these to GVR4 members for $450 shipped.P/N K559M85
  20. WTB: CAS plug with pigtail

    I saw on a forum that these might be available new through Hyundai. I'm not sure if that's true and maybe someone can elaborate. If not, I'm looking for a CAS plug (harness side) with 4+ inches of pigtail on it. This is for a (later 1g?) style CAS with a black plastic cover.Thanks for any...
  21. FS: Evo 1-3 Ralliart engine mounts Group N (MA) $80 plus ship

    Ralliart Group N engine and transmission mounts. The engine bushing has a folded edge from pressing it in but it's in all the way and is hardly visible. Like 1mm of the edge is bent in from my crappy press job. Otherwise these are perfect and have been serving duty for two seasons.They fit...
  22. FS: PTE SCM61 Turbo with T3 housing

    I was trying to sell this turbo a while back Luckily I didn't. I bought a brand new turbine housing from PTE for it. It cost over 200 bucks just two weeks ago. I'm making a new manifold for the car and wanted to get away from using the Mistubishi flange.Anyhow, while installing this new...
  23. FS: Tial 38mm Wastegate, Silver.

    $125
  24. FS: Group A WRC waterpump for 2g, Evo 1-2-3

    I have a brand new Group A waterpump, factory Ralliart.It has an aluminum impeller and also a straight facing outlet, NPT fitting where the crosspipe goes. It cost over $500Will sell for $200 plus shipping. This is an extremely rare part. There are only a small number of factory cars left...
  25. FS: PTE Turbine housing for 4g63 SCM6152E

    clickPerfect condition-
  26. EB: Evolution 1-3 Powersteering pump, res, hoses and pipes

    clickThe whole shebang. I know some of you guys have early Evos. Get spares now while you can.Alex
  27. FS: Jay racing alternator relocation kit minus P/S Bracket

    I'm missing the small flat bracket that moved the PS pump over to run on the outer pulley train. It's easy to make that part though.$75 bucks plus $6 shipping.I take paypal.
  28. FS: Evo 1-3 Intercooler spray button

    Who knows what you'll need this for. $15 shipped.Paypal to [email protected] have some other Evo 1-3 stuff on ebay now if people need anything.Seller name dent-sport
  29. Group A Evo III parts (photos)

    I thought you guys would get a kick out of these.. from the spares of one of two remaining works Evo III cars in the world.. (ex tommi)Frame rail mount for transmissionLightweight crank pulley, aluminum center, harder durometer damper and a single belt guide.left hand...
  30. FS: Evolution VIII Rods and pistons

    $55 bucks shipped! Pistons have some scuffing but rods are perfect. Probably not a good idea to reuse pistons anyway right boys!?Paypal to [email protected]
  31. SOLD: My 1jzgte powered Montero/Raider (located in MA)

    clickorEbay AdAlex
  32. Rear differential bearing caps (need torque specification)

    It's not in my Haynes and the internet isn't giving me any answers. Does anyone have a factory FSM handy? I have one at home but I'm at the shop now.Thanks,Alex
  33. AEM issue with Coolant temp sensor

    I'm struggling here with a 1g. It's got AEM EMS. We have a new coolant temp sensor in the T stat housing, have checked both wires for continuity to the ECU and the temp on the laptop states 217 degrees at room temperature.Disconnecting the 2 pin spade connector from the sensor yields a 2...
  34. 1g versus 2g/Evolution 1-3 head question answered

    well, as best as I can answer it.To my surprise the Galant/1G head produced better dyno numbers. The catch is that I can't tell you if it's the head or the manifold but all other things being the same mechanically we tuned my car today with the Evo II head and it made 480 or so whp on our...
  35. Some cool VR4 and Evo Old Commercials

    clickclickEvo 7-click
  36. Transfer case help with Ratios and what's around

    Hi Everyone. I need some help with this transfer case issue I'm having. Hopefully there is a solution.I've installed a Ralliart dogbox in my Evo. It has the following gearing.Front ring and pinion- 4.26 1st- 2.06 2nd- 1.50 3rd-1.19 4th-.958 5th-.807From what I understand and study this...
  37. Transmission identification W5M332MM2L UH4203

    I've never seen this one before.I know it's AWD and 95-99 or whatnot but nothing more.Anyone know?
  38. Engine teardown after 3 years of track/race use

    I expected much worse. After the thread about the short balance shaft snub failing due to lack of support from the shortened balance shaft, I got worried. After three years of use I thought that I'd be cautious and tear the motor down, expecting to have to do at least the bearings, rings and a...
  39. 4.23 Rear diff in existance?

    Is there a rear ring/pinion that will get me a 4.23 ratio for the rear diff?Alex
  40. Transmission rebuild question- removing shift selector shaft

    I'm in the process of rebuilding my transmission. I've never removed the shift cable selector shaft (that's what I'm calling it)How the hell do I get this out? There are pins but they don't budge.
  41. SOLD: EB in MA Mercedes 2.3-16 Cosworth, Black 5 speed 1986

    I think that covers the GVR4 rules for title posting.Photos are here and on ebay-clickEbay ad-click I decided to keep the Evo. That means I have to sell something and as fickle as my decision making regarding cars might seem, there is reason behind my madness. I love this...
  42. SOLD: 2003 WRX Impreza Wagon $10,200 with 88k miles - MA

    Available for viewing in Norwood or Waltham, a 2003 Subaru WRX wagon in silver. Asking $10,200. All service is up to date including timing belt. The car has new Yokohama AS430 tires with under 500 miles on them. (the little rubber nubs are still on them) It also has fresh spark plugs, oil...
  43. CAPS online

    click+ many more my friends... many more.
  44. EB: Evolution II track car - Newton, MA

    clickEmail me at [email protected] with any inquiries you have. I'm going to be taking a break from racing next year and I don't need to sit on the car while I'm doing it. This is a very freakin competitive car for the money. You can't get any more performance for under 30k.Alex
  45. FS: 1994 Evolution II track/hillclimb car $21k - Mass.

    After much deliberation over what I planned on doing next year I have decided to sell my Evo II and run a street car to keep the racing budget under control. My car is now the product of three years of track development and is, at present a turn-key race car.It has a Custom Cages T45 cage...
  46. Rear ball joints upper and lower for control arms

    Can anyone give me part numbers for these? the parts guy is saying that the arms only come complete, much like they say for the fronts. Even aftermarket part numbers will be cool. They're for Paul's rear end.AL
  47. Mitsubishi Caps part number PNC- 46565 NLA?

    I don't know the part number. It seems that our caps program is terminally ill. It's a T fitting on the backside of the front steering rack that balances the pressure from side to side (I think)The part is NLA. We need one. Does anyone have one? We've eliminated 4ws on the car so maybe a TEL...
  48. The ultimate street galant in the making? Cheekychimp's

    I know of only one other that might take the title but it's a little less street and a little more race.Paul asked me to post some pics of parts we're recieving for him on a daily basis. There'll be more to come. These are parts exactly to his specification so I'm sure he's more prepared to...
  49. Choosing Fastener Material

    Tensile StrengthsAlloy Steels cad, chromium, nickel plating---up to 300ksi Carbon Steel--- 55ksi and up Stainless steel 300 series----70-140ksi Stainless steel 400 series--- up to 180ksi Inconel 718--- up to 220 ksi Inconel X-790--- up to 180ksi Titanium--- up to 160 ksiI...
  50. Pictures of recent work Manute's car

    edit: pics are now located HEREThese are some pics of recent work at the shop. Mark's car is getting a new oil filter housing, new oil supply lines, turbo gaskets, coolant lines, TB coolant bypass, EVO 8 IC install, IC pipes, Intake pipe, Maft T installation, fuel kit adjustment, oil...
Support Vendors who Support the GVR-4 Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications RixRacing RockAuto RTM Racing STM Tuned
Top