Did you try jumping the terminals at the starter?There should be 3 connections. Jump the constant 12v and the smaller one.

^pics?

Interested pending shipping to Canada

Price for black set shipped to toronto Canada?Thanks

I have for sale 20x commemorative Wrestlemania pins dating from 1985-2004 They are in mint condition The pins are on a styrofoam pad but do not have the backingsI only have 2 sets so when they're gone, that's it!Priced to sell @ $30 plus shipping

Thanks for the replyMakes total sense. I've read about the binding. I'll be sure to torque THOSE ones once the car is settledCheers, from across the pond

Hey all, I'm currently rebuilding my rear subframe with all new polyurethane bushings. Question is, do you guys torque to factory spec? Or, under toque because of the "softness" of the bushing?Thanks

Here's my vinJE3BX56R1MZ014475Hope this helps

Might be a long shotLike title saysShipped to ontario canadaThanks

^ that's the planIt's held up fine for now...

So I guess I'm stuck with the ggsx 3bolt rearUnless I swap the tranny from a 1g turboFml

I was told I could just swap the ring gear and pinion from a 3 bolt rear and use it on a 4 bolt LSD and housing.Well, you can't!The ring gear from the 3 is waaaaaaay smaller than the 4.Now, I'm stuck with both rear ends in pieces and brand new oem seals in the 4 bolt housingWhat I want...

Sorry!All sold!Thanks

$8 for 5 shipped!First come, first served

I definitely won't be reusing these lolI actually found some washers at work and they are a perfect match.

Seen here:

Just wondering if I need to keep the large washer type spacer that goes between the body and subframe/mustache bar?I'm installing solid mounts on all 4 cornersThanks in advance

Thanks for the replies, guysEnded up getting a set from RTM up here in Canadawww.Rtmracing.com

Just ordered a set from rockautoMoog with nipples $20/ea

Thanks for the tipAny idea where to get the bushings (spacers)? Other than making them myself?

After much research I've decided to ditch the "metal on metal" helm joints. Going to try the QA1 Teflon lined versions.

I'm a millwright. I think I have and know how to use more precision tools that you probably do, no offense lolAll I needed was a measurement. That's what I thought these forums were for. For sharing out experience to help others.

This is what I haveI've read the bushings are too big to fit in stock locationHow much do I need to take off for them to fit?Thanks

Lmk what you haveLooking to replace mustache, subframe and sway bar bushingsShipping is to canadaThanks

I can get a quote for serious buyers

Just a feeler if anyone is interested in them.I have all 4 pieces.Driver's side has a crack in it. I used some crazy glue to hold it together.Right rear is a little deformed from the heat gun I used to remove it.Other than that, they are in pretty good shape for being 10+ years old...

Hey all, just looking for a couple of these rare pieces.Snapped 2 when I removed my grill.I can paypal asap.Thanks

You might find something here:click

A heads up display would be pretty cool

That's pretty sweetHow much do those run?

I guess I won't be tuning enough to justify buying/fabbing a tableThe ends doesn't justify the means lol

Has anyone successfully installed a laptop mount for tuning purposes?I like the ones the cops use or even some service vehicles.Where would be an optimal mounting spot?I was thinking of making my own. Mounting it to the passenger seat rails some how would provide the sturdiest foundation...

Would you sell for $80 shipped to canada?Thanks

I got one that fits your criteria$65 will get it to your door (it's $30+ just for shipping!)I can send pics

Penetrating oil OR heat...not both lol at least not in that order

1g dsm uses the same part

Thanks for the repliesI'm more worried about the high heat from the engine distorting the paint.Should I be worried about using regular flat black paint?

I'm planning in painting my hood. I primered it and it's all ready to goI want to do it flat black and I removed the under-hood insulation already. I was thinking some kind of high heat paint ie engine or even BBQ lolWhat are your experiences?Thanks

I just did my test on Saturday and rocked it!!!Basically, once you get all the settings keep it in open loop mode.Watch all the videos on the ecmlink page and take notesGood luck

So basically I grabbed this horn from the scrap yard.Notice there is only one plug and I assume it gets grounded from the centre mount.Now, here is what I haveThere are 2 connectors going to the horn. One wire is constant "hot", The other is ground.When I try to install...

I used about one and a half of the small tins. In total, I'd say about 2-3lbs each door. I don't think there's too much weight on those clips

Finally got around to doing this.Here are some pics for your viewing pleasure.Keep in mind this was my very first body work attempt.This one was between coatsAlmost doneThe only thing I had issues with was when I sanded the cladding itself it's fibrous. So here's always pieces...

No comments? LolEven constructive criticism? Don't be shy guys

Finally started up my car yesterdayHere are a couple of vids my brother tookThe throttle cable came out of the sheave midway through the vid lolclickI'm trying to figure out what that whistling sound is. It happens as soon as I let off the throttle and the rpms decel.click

$5 for 2 shipped to Canada? PayPal?

Here are some:click

Cost is def a deterrent Maybe some decent coilovers IS a better alternative

^thats the ticket!Didn't go through the site to extensively but I wonder how it corrects camber?

Tossing around the idea of air ride for my g-rideHas anyone attempted this? Or successfully installed air ride?Thanks for any input