Never finished the project time to part waysI am willing to ship anything at your expense some prices are shippedall parts have never been raced, Car was never tuned.I have paperwork for the motor and it was purchased a few years ago, car had been sitting for a while never, could get...

This is fun, I switched out my fuel sending unit gasket the other day and when I wired everything back up... I try to crank the car over and notice smoke coming from my trunk... Apparently the guy that wired my fuel pump ( intank ) thought it was a good idea to use a red ground wire and a black...

[/url][/img]It looks like one of my pistons is cracked?

I am having a problem! My wide-band gauge reads 20 lean most of the time, it will change if I rev the car but then goes back to 20 at idle. This sensor is pretty new I replaced one already.I have it wired to the ecu and Ecmlink tells me the wide-band is at 9.6?? I can smell gas from my...

Cleaning out the garage, if you want something make me an offer please I am sure some of the pricing is off. I have PayPal. All OBO I AM IN A RUSH TO SELL! I might be at work so if you want something please text me 262.501.1052ams no tick lifters brand new never used, I opened the package...

So I have been looking and looking for a solid answer, I found tons of opinions and would like the wise opinions of the .orgStock feed location from head, brand new gt3076r.Read on tooners that you should always have a restrictor on BB turbos.Read on an srt forum that they have a built in...

I have some wheels that need to be re painted, just looking for some ideas.Car is BG current stock wheels are bronze, I like this look but I feel like its on every BG galant....I am open to pretty much anything, I also have some red mud flaps I was thinking about using so maybe keep that in...

So I am trying to dial the car in. Watching the ecmlink videos about fuel trims and I cannot get mine to move because the front 02 doesn't cycle, the sensor is about a year old with even less use.I tried to do a cruise log but got no where.Looked at the sensor connector and it looks fine...

Hey guys just swapped these out for more aggressive cams.They have 2500 miles on them looking for around 300$ shipped or throw me an offer![/url][/img]

So today I thought it would be a good idea to install my regrind 272 cams while my turbo was out for rebuild/exchange.I was installing the shims for the regrind cams got to the last lifter and dropped the shim into the top right oil galley..... I am pretty thrilled.This is where is gets...

So I am in need of a new fuel pump for my (hopefully) near future set up.Plan is to run on e85 with 1600cc. Looking to be around 500whp.I had an Aeromotive 340 but I am open to suggestions. Don't know if anyone likes one or the other better, if not I will get another Aeromotive pump.

Looking for a 4" intake pipe with couplers if possible for cheap pleaseI am broke

Has anyone ever done this before? Seems like a pretty simple process...Does anyone know how they determine if your turbo is covered by the program?I have a gt3076r that needs an exchange.

1st noise aftermarket TOB web page\2nd noise Broken exhaust hanger on drive-shaft.web pageThank you everyone that helped!Captn

Alright my car is running like crap! First off it sounds like a Subaru and that makes me sad, runs very poorly and does not want to accelerate.Things I did already!Replaced spark plugs and wires - I noticed some oil in the wells, I didn't clean out yet for some reason. Tried a different coil...

Where is this thing?My car isn't starting and I think I have it narrowed down to this switch.I have a new starter I have power Fuses are good Car doesn't even click when I try to start itAny help?

Looking for this! Hoping to get a good price shipped.Let me know!Captn

I have a good amount of thing just sitting here that I am probably not going to use. Prices are shipped and OBO, Pay Pal fee's separate unless payment is sent as gift.Pics comingIf sold this will fund fixing my car!!Stock vr4 cams 130k on them - 40$ shippedEvo 8 cams 50k on them - 50$...

I am in need of a sending unit, mine is rusted to death and the fuel line is leaking.I need one that is in good shape!!Let me know!Captn

So I need one of these for my car looking to spend 100-150$ for an aluminum radiator. let me know!!! Hurry too!! Slim fan on rad please if no fan that's fine let me know!Captn

Like the title says I need one of these!Let me know.

I know a lot of people do this and I am wanting too as well. I am just having a hard time figuring out what fittings I need for the fuel tank? I have no issue figuring out the fittings for the engine bay it's just the fuel tank.Do most people use 90 degree fittings off the tank?If...

I have a wtb thread for an Evo III intake manifold, another member posted saying he thought the 94 Galant gs manifold was the same but we haven't found any information to confirm.Would anyone know about this manifold?-Captn

Like the title says I'm looking for a Evo 3 intake manifold. Looking to spend around 100$ let me know!

Looking to find someone in the Milwaukee area or Chicago area to rebuild my trans. Anyone know of someone that does good work? I know people are out there I am just having a hard time finding them! Anything helps, however I do not want to ship out my trans and I am only looking at spending...

So I tried to search and found a site that didn't work wondering if anyone could help me out. I have a 2g maf but the center honeycomb is missing... I have read that this cannot be used, I am wondering if the stock maf honeycomb will fit or if I can use the 2g one without the center honeycomb(it...

Just want to make sure this is a direct replacement, I know it is for 2g dsms but is it for us? I tried the search and found nothing, also vfaq didn't have anything on a evo pump that I saw. Let me know if anyone has done this! I would like to install one!

I am in need of a cheap piping kit for a fmic, I know people have used ebay kits before without anyproblems. I wouldn't have a problem with this if I could get them welded like everyone else but I cannot! Would anyone have a piping kit they wouldn't mind getting rid of for cheap? 100-150$? Also...

Hey guys, I recently aquired a 2g maf with the adapter harness, only issue I am having is with the stock bov. the return hose will not work at all for the 2g maf and it seems like the position of the bov wont work at all. I am wondering if there is a possible way to get a return hose that would...

Does anyone know if this would be an upgrade from the stock cams in our cars? I can't find much information on the evo 1 cams. I am guessing they are close to the same.

They look nice! What are they worth?Edit for rules

Bought a 1g to 2g maf harness adapter from him, shipped it the next day and I got it later that week. Product was in great condition!

So last night I was driving, kind of fast ( I was in a hurry ) around 5.5k in 2nd and 3rd ( still under the speed limit) at 10psi was working fine. The next light I was driving normally and I hear this whistle a little bit like a rattle sound, a friend of mine told me to look at my turbine...

I sent iceman a pm but it's been a week and no reply I need one of these asap if anyone is selling let me know! Thanks

Hey everyone, my name is Taylor I recently bought 28/1000 my first Galant VR-4. I am very excited to become an owner of this beautiful car. I know there was only one picture up on the site, but I went down to check it out and loved it! Car is in good shape. The car is now in WI it drove like a...

I saw this in another post, I am wondering if anyone has one they would like to get rid of! Let me know thanks!

Anyone know where I can buy an e brake cable or the correct size of them? mine just snapped on me so sad.

I am in need of new mesh for my galant, does anyone know where I can get some good mesh? When I search all that comes up is full grills or civic stuff. I have a AMG carbon fiber grill and I need the mesh to fit that. Any help is much appreciated.

I have been looking for a new gasket set, all I can find are very cheap sets. I am wondering where I can find a good quality gasket set, any help is much appreciated, 4g63 motor.