The Top Mitsubishi Galant VR-4 Resource

Join the best E39A 1991-1992 Mitsubishi Galant VR-4 community and document your GVR4 journey.

  • Software Upgraded - Reset Your Password to Login
    In order to log in after the forum software change, you need to reset your password. If you don't have access to the email address you used to register your GVR4.org account, you won't be able to reset your password. In that case, follow the instructions here to regain access to the forum.

Search results for query: *

  • Users: rdomeck
  • Content: Threads
  • Order by date
  1. FS: Evo 9 Ohlins to fit GVR4

    I have my car for sale and have not had many bites on it. I would be willing to sell my shocks and springs with about 8000 miles on them. I would of course need a set of shocks and springs to put back on my car.$3500 seems fare with your shocks in on trade!I could even pull them off and...
  2. FS: 1992 VR4 Indianapolis, In. 692/1000 **SOLD**

    Well, I have purchased a new Cadillac and it's time to sell the VR4. I have a bunch invested like most of us do and I'm looking to recoup half of what I have put into this build over the last two years. I have offered the car back to the previous owner and he is going to let me know in the...
  3. FS: 20' Enclosed trailer $2500 Indianapolis, In. SOLD

    For sale is my 1995 20' enclosed Haulmark Race trailer. I have known this trailer since it was brand new and I purchased it from the original owner about 12 years ago. It is in great shape mechanically. Has good tires and good aluminum wheels. It has a ramp door as well as a door on the left...
  4. I can't seem to figure out my clutch

    So, I have been fighting clutch disengagement issues every since I purchased my car about 9000 miles ago. I have done the followingNew Slave New Master New line Stage 2 shep trans (unknown mileage)The trans that was in the car was ok, but went with the shep trans that I purchased from a...
  5. Battery going dead due to door not shutting correctly

    So I have been chasing a battery going dead for a month or two. It will sometimes go a week and not go dead and sometimes it will go dead in about 8 hours. I have been trying different things and noticed that my door has been having trouble staying latched. I do finally get it latched, but I...
  6. Need a basic tune map

    I have been messing with ecmlink for a while and I think I have change more stuff than I need to. I spoke with someone today on ECMtuning website and he is willing to get me a tune, but wants me to switch over to SD. Not something I think is needed on my setup! See signature below. I'm not...
  7. Trying to locate a video?

    I have seen a video that shows a welded center diff vs a non welded one. I have been searching youtube for the last 30 minutes and cant seem to find it. Anybody have a saved link for it? It did not have a VR4 in it. I think it was a Laser, but I really don't remember.Thanks,
  8. GVR4 in the snow.....

    No sliding around, just a picture in the snow. Will get a video sliding sideways at a 150 mph next time it snows!
  9. WTB: 6-bolt long block

    Looking for a rebuildable short block to go with a ported head that I have. Don't exactly need to, just kinda want to. Local would be great although I don't mind arranging shipping, just would need to be worth it! Ok to be disassembled too or a block from one guy and crank from...
  10. WTB: B for Borrow a 93 headlight housing

    I run a fabrication shop and I have a few idea's for repairing the 93 headlight chrome. We do a lot of custom one of work and most of our business involves making work that goes into art museum's....We do a lot of different finishes on a lot of different materials.I just need the reflector...
  11. Guess What? Another clutch question/problem

    Ok....So I purchased my car and it has always shifted notchy and stiff....I had the engine out to rebuild and didn't see anything out of line with the clutch. When re-installing I made some adjustments to the cables as they were off. Maybe a little better, but still not what it should be. So...
  12. FS: 93 headlights. Great shape! SOLD

    Just picked up a set of 93 headlights in the pull a part lot. The chrome and glass are in near perfect shape. There is one broken adjuster. These are in better shape than the ones on my car. If the don't sell I will replace the ones on my car and sell those at a cheaper price! $220 shipped...
  13. BISS screw gone.....

    I knew it needed a new o-ring. I had to reset about every 1000 miles. Well it really loosened up on a couple hundred mile road trip yesterday and now I need a replacement. I have found a standard Galant in the local pull a part. Will a non turbo biss screw work?Thanks
  14. Exhaust resonator?

    I have read good things about Vibrant Performance Ultra Quiet resonator's, but have not had any first hand experience with them. I recently was pulled over because of a loud exhaust on the interstate and installed the catalytic converter that I had on the shelf and it is a little restrictive...
  15. WTB: NEW TPS

    I think mine is bad....Not sure, but not interested in going used.
  16. Lets see how this goes.......

    I have been on a few out of town trips on my own, but the first with the family in the VR4. Wife is skeptical that it will make the trip. I am not of course, hopefully! She thinks this because the car has spent more time in my shop than me driving it. It's only left me stranded twice. Once...
  17. 90 OFH turbo oil feed?

    I am switch to a 90 OFH and I am currently feeding my turbo from the OFH. I am going to run a filter on the inlet of the turbo so I don't think it will make a difference, but thought I would try and grab the filtered oil if I could.Thanks
  18. MHI EVO III 16 G excessive side shaft play less than 4K miles?

    I have my turbo off to replace the gaskets and noticed that the side to side shaft play is very excessive. So much that it's hitting the compressor housing. I have less than 4K miles on the car and I just looked at the receipt and it's just barley over a year old....Ya know just out of...
  19. EVO 8 Intercooler into a GVR4!

    Well...If anyone ever wondered if an EVO 8 intercooler would fit a GVR4, it will. Only took a few modifications. Started with hanging the core and making sure the bumper would still fit. Then started on the plumbing. There is a lot of pipe compared to the top mount tat I was running.Used...
  20. WTB: Front bumper shipped?

    Looking at cutting out my front bumper, but it's in really nice shape. Anybody have one that has either been cut or needs repair? Or is in good shape? Shipping would be to a business address 46202.Thanks, Randy
  21. WTT: 1020cc injectors for your 650-750cc injectors

    I followed the advice of the guys at STM and purchased 1020cc injectors to go with my EVO3 turbo.....They are just to big for my daily driver. Would like to trade plus a little cash on your end. These have about 4000 miles on them. I may try to cut back on fuel pressure if a trade doesn't...
  22. Car died.....Little direction please

    Last week my car was shutting off when hitting a bump. This happened 2-3 times in about 10 miles. Didn't happen the next day, but decided to drive something else out of town for a long weekend. Drove the car again Monday and the problem was there about a 50 times in 4 miles. Got it back to...
  23. Cyclone intake W/ECMLink?

    Thinking about doing this! Will it be worth it and is it that hard of thing to do? I run a fabrication business so I don't mind making some things if I need to. Mainly wondering how ECMLink controls the butterflies?Thanks, Randy
  24. WTB: Cyclone intake

    I'm thinking about installing one of these. Any body have one? Already running ecmlink full version......
  25. WTB: Windshield Trim "Found"

    I have one or two pieces. Mine blew off at a high rate of speed....I did order new hold down clips, now I just need the trim. Would like all three pieces, although I think the top one was the one that blew off!
  26. 4th bolt between engine and trans?

    I installed a transmission last night and I noticed that the 4th bolt below the starter wasn't there. This is the hole that has the dowel pin in it from the engine. The engine block had a 10mm threaded hole in it while the trans had a 8mm threaded hole. I ended up drilling out the engine...
  27. Trans rebuild?

    Shep, TRE, or Jack's? Seems like they all know what they are doing! I know it's been ask before and I'm sure it will be ask again.....
  28. WTB: Like new driver window switch?

    Don't laugh to hard, but I got really exited when I found a mitsu dealer that listed a new window switch for the drivers door. I didn't like the $330 price tag, but went ahead and ordered it. They called me a couple days later and said that it had been discontinued! Anybody have a good known...
  29. Automatic seat belt trigger?

    My passenger side seat belt has not worked since I painted the car. I can ground out the relay and get it to move back and forth and the door light comes on when I open the door so I know the door switch is working. Anybody know how the ground signal gets to the relay?
  30. Automatic seat belt trigger?

    My passenger side seat belt has not worked since I painted the car. I can ground out the relay and get it to move back and forth and the door light comes on when I open the door so I know the door switch is working. Anybody know how the ground signal gets to the relay?
  31. WTB: Transmission cable bracket

    As I understand it, my car has a DSM trans with a VR4 shift cable bracket. I am having problems getting into reverse and I am told that I need the DSM bracket to make things work correctly. Anybody have one? Thanks
  32. Installed LC-1 and now wont start!

    I installed an Innovate LC-1 on a good running car and now it just spits and sputters when I try and start it. It acts like its out of fuel, but I have good pressure. I installed it using the front O2 input and used the brown output from the LC-1. I use a Mac so I don't have a way of hooking up...
  33. FS: 14B with manifold and O2 housing $200 Price drop

    This was on my car when I purchased it. I do not know how many miles are on it, but it would still be on it had I not pulled my engine to rebuild it. While I was there I went ahead and installed a B16G and EVO3 manifold and O2. There is a little bit of shaft play, but nothing that I would...
  34. FS: KYB AGX Shocks and H&R lowering springs $250

    I'm installing a new set of Ohlins on my car and don't need the AGX and H&R springs. I have only driven on them about 500 miles. The previous owner installed them and I can only assume they have about 10,000 miles on them, but I really don't know. The felt like any other KYB shock that I have...
  35. WTB: Drivers side fog light lens

    I managed to crack my lens while loading my car on the trailer 10 minutes after I purchased it. I am on my way back together after painting it and would like to put a good lens back in! Don't really want to buy a whole set unless I really need too!
  36. Evo X shocks and strut's?

    Seems like the rears already have the correct lower mount from some pictures that I have seen! Front's look close too! Any body thought about this. I did do a search and didn't see anything that would apply. I run a fabrication business so a little modifying doesn't bother me! Seems like...
  37. Painted door handles or Black?

    I have my car apart to paint and was wondering if anyone has pictures of their door handles painted body color? Would like to see how it looks, but I'm thinking of painting mine white to match the car!
  38. Disassembly and paint of 692

    I started the complete disassembly of the VR4 today. Doesn't need a lot of body work, so I'm hoping to have it painted in about a week and back together maybe next weekend! Will post some updates as I go along. Painting it Dover White from the newer Galant's.
  39. WTB: Drivers door

    I am in need of a drivers door that is within pick up distance of Indianapolis, In. Bare is ok, as mine has a big dent in it but otherwise is fine!
  40. Cibie Super Oscar rally lights

    So I am taking apart my VR4 and decided that I would go ahead and mount a pair of Cibie Super Oscars that I had purchased for my Porsche. Matches my hood scoop well I think!!! The bracket that I made bolts to the two inside headlight bolts on each side and one bolt in the middle near the hood...
  41. Top mounted intercooler, very short route and hood scooped! *UPDATE*

    So...I run a fabrication shop and I ended up making this set-up myself. I have 9" of piping total and my cooler is 11"X15" with out the end tanks. I have a 11"X2 1/2" opening in my hood to get air to the cooler and I like my temps so far. I may put a puller fan on the bottom of the cooler if...
  42. Intake Air Temps?

    Ok, I am using a much different set up on my intercooler and today I did a log that involved small streets and then some interstate driving. Seems like my temps are good and they recovered quickly!Would like some input on what you guys think once you look at the log!clickThanks,
  43. Running SD and can't get above 5500RPM with it stumbling?

    I'm running.....-V3 Lite -1050CC injectors -Evo3 manifold and O2 housing -Big 16G trubo -Top mounted intercooler (not ducted correctly yet, but will soon) -3" turbo back exhaust -Adj fuel pressure reg. set at 42-45lbs -Map and IAT along with the MAF cable ECM tuningI think I have the ECU...
  44. Making a top mount intercooler and have a plumbing question.

    I am making a top mounted intercooler and am trying to figure out if the outlet pipe of the turbo (big16G) should stay at the 1 3/8" id. all the way to the inter cooler or should I step it up to the 2 1/2" that I plan to use for the exit into the manifold. Total length between the turbo and...
  45. Evo III turbo gaskets???

    I called the dealer and they wont help me without a vin. I ordered an Evo 3 manifold, turbo and O2 housing from STM and didn't think to get the manifold to turbo gaskets or the O2 to down pipe gaskets. Anybody know what year I can tell them or better yet some part numbers?Thanks,
  46. What kind of power should I expect?

    I doing a stock rebuild and have no idea of what kind of power I'm looking at producing....300? 350?Big 16 G turbo Evo III exhaust manifold and O2 housing 3" exhaust DSM link Larger injectorsAll new stock components MLS head gasket ARP head studs balance shaft's deleted, etc. I will be...
  47. Engine measurements?

    I can't seem to find a Chiltons manual locally for our cars. I did a search for engine tolerances, but I can never get this sites search engine to do anything for me...It just pulls up all the post from newest to oldest. Anyway is there a archive place that has all the crank journal sizes...
  48. Engine build of #692

    There has been a collision of my pistons and valves....Which is going to lead to a bunch of internal engine parts. Can you guys recommend an aftermarket company that stocks pistons, valves, turbos, etc. I'm new to the GVR4 world as I didn't have my car two weeks or 385 miles before the engine...
  49. Not so Proud owner of #692 New engine

    Well I guess the engine build is on......Crank is spinning and cams are not. I'm not sure if the tensioner was week or what happened, but the belt didn't break. Guess I get to fix the #1 cylinder that was a little low on compression! I am hoping that a $3500 budget will get me around 350-400...
  50. WTB: Drivers door

    Just bought a car and would like to replace a damaged drivers door. Shipping to 46202 business. Thanks, Randy
Support Vendors who Support the GVR-4 Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications RixRacing RockAuto RTM Racing STM Tuned
Top