Sold

Sale pending

Buy it for her

Yes, AC works as well. Compressor, expansion valve and dryer were replaced about 3 years ago. Using R134a as I couldn't get my hands on R12

Price reduction

Quoting GSTwithPSI: Originally a BG car I assume?Yes Sir!

Quoting fuel: Nice example at a good price! I would be tempted if it weren't for the distance!- How many miles on the odo? - Original 3-bolt rear end I'm guessing? If so is 4WS still intact? - Was a DSM engine swapped in or does it just have the DSM valve cover? - When was it sprayed white...

Hey guys, the time has come to let the VR4 go.I've had it for over 12 years and it's been one of my most reliable cars.We have to many cars at my home and it's time to say goodbye.The GVR4 has been in my daily driver rotation the entire 12 years and 2-3 of those years was my only...

Haven't done the whole schematic troubleshooting effort but will if necessary..Have any of you had your headlights shut of randomly for seconds at a time?Mostly over bumps, but it "feels" like it's related to the hi/low headlight switch.

Looking for a good high side AC line with good Schrader valve threads.

Upper part of valve broke off while trying to remove it...lower portion is still in and sealing....apparentlyNot sure how to get it out once the upper portion (the part the tool grabs) breaks off.

Thanks guys!Believe it or not, I got the AC working with a broken schrader valve in the High-side port.While I couldn't measure the HS pressure, I was able to vacuum and fill low side till the LS gauge read 30-35, 2 cans.I will look for a new HS line as soon as time permits.

Got a good high side A.C. Line from compressor to condenser?

Hey guys, I've somehow managed to bugger up my high side ac connection and will require a new high side line.Can I grab one from any 1g dsm or are these specific to the gvr4 (length)?

Same here - no rush!

No worries, thank you for testing to ensure a quality product!No rush on my part.

When do we pay?

Ahh, makes sense!

Why is the pass side seat leaning in?

Count me in!

Done!!Drastic improvement, and working horn to boot!!

Golden info - Thank you so much guys!!!As a long time DSM guy, I have forgotten more than I care to admit....I have a $60 pull-a-part tranny in my GVR4 now and plan to go through it this summer, finances permitting.Has anyone captured required parts list when trying to build the "ultimate...

Possibly, would it make that noise if the plastic coating is partially missing from the striker surface?

LOL, the cracking noise is more of a squeaking noise in real life...I guess for the purpose of this video, does this sounds familiar to anyone?

I have a very annoying squeak coming from the door/lower b-pillar area and I cannot locate it.Have you heard this and if so, how did you fix it?Sorry about the video orientation, was focused on drivingClick Me

Sold - Thank you!

I'll take two Rect 120's...pm me payment details please

Pending sale, but PM sent to you for shipping estimate.

91, I can provide pics later tonight.

Hey guys,I've switched to Evo IX wheels and don't need these guys anymore.They are in "ok" shape and currently plasti-dipped white.There is some curb rash on a few of them as well.I'd hate to throw them away, so I"m willing to let them go real cheap, tires have about 40% tread left as...

How bad are the interior plastics?I'm looking for lower b-panel trim pieces.

So I guess I'm an idiot and didn't torque this down correctly.Once I torqued down the axle nut, the play has vanished, sorry to waste others time.

Will do this tomorrow night and report back, thanks for the help.I did drive the car ~25 miles, hopefully no damage was done.

Ok, back to needing a bit of help.Removed the front pass tire due to a small leak, and found that the new bearing in the hub has play....Not sure how that happened as nothing out of the ordinary occurred during installation...Any ideas?

I appreciate it guys!The point was to do something with the evo wheels I already had while increasing traction and maintain the gvr4 by replacing the bearings....win win.Guess I should tint the Windows now?Evo steering wheel to be installed in ~2 weeks as well.

Still need an alignment and need to address some rubbing issues, but overall I'm happy with it.

Hell, we never got to the point of discussing payment, I would of paid $75 just to have them press it out, which is all I asked them to do. Idiots they are!

Absolutely!!Makes you wonder about the competency of the local machine shop thoughI've given up on most of the machine shops in my area years ago anyway.

Got it!400° in the oven for 45min...and then used a can of compressed air to freeze the race and press it out....took 5 mins or less <img src="/ubbthreads/images/graemlins/smile.gif" alt="" />Thanks for the help guys!

Yep , snap ring is out and I'm pushing towards the snap ring side.I"m not real comfortable with the current setup on the press using wrenches under it to level it, but I haven't found a better way yet. I'm nervous the wrenches are going to fly outMaybe I'll heat/freeze and hit with 4lb...

So the plan is to heat the knuckle in the oven at 400º and then freeze the race, does that still sound like a valid plan?

Quoting 89Mirageman: That's kinda what I was thinking too Dayo.To the OP, I know you said you've done this before and this is probably silly but you did remove the huge circlip correct?Absoluetely sir!

Quoting 89Mirageman: Kinda confusing here, to me at least. Are you saying the outer race is stuck inside of the knuckle? Or are you saying the inner race won't come off the hub like the guys above are talking about?I'm sorry, I should have been more clear - It's the outter race stuck in...

Need a bit of help guys.I've done DSM wheel bearings before, but never had this problem...Front bearing race is stuck in hub and my 12ton Harbor freight press is flexing and making me uncomfortable (even after tried torching it with a map gas torch)trying to push it out. I'm having...

Are the b-pillar bottom trim panels in good (flexible) shape?

Does he also have a 3d scanner to import objects into CAD?

Yes, for $199 I'll print you a FP Black with a 10 second warranty

Honestly I don't care if it matches, we could try painting to match color..

Personally, I need AC vent fins, maybe a couple switch housings.My Radar detector fell off the window and shattered all my center vents fins, well, the ones that run horizontally anyway.I'm sure there's plenty of our parts that could be reproduced if someone wanted to. I have no experience...