HeyLooking for an auto transfer case and a 3.307 rear diff crown and pinion vr4 or rvr etc. postage to Australia!Thanks, Brock

Hey guys,Chasing an AMG rear bar posted to Australia, pm me if you have or know anyone willing to sell one. Not looking for full set, just rear bar.Thanks, Brock

HeyAs most vr4 owners are aware if there is a problem with the rear rack (Leaking or doesn't work, etc) the first option is to delete the system. Some people will argue that the car will handle better with or without. In my instance i never have felt AWS and now after this simple fix, i will...

HeyI've had steering play for as long as I can remember, (minimal leaks too) and I want my steering to be tight again, it's the first time I've had to pull my steering out and it wasn't that bad. I've rebuilt a starion steering box before and it was just seals.I got quoted $600 to rebuild...

hey guysMy GVR4 has been off the road for over a year and has undergone some big changes from stock, I have changed the turbo setup to a GT35r from ebay (Chinese) i rebuilt the turbo as soon as i got it and replaced the internals with a kit from gpopshop.com. I wanted to change the intake...

Hey guysi bent and broke my steel line along the block that runs from the oil filter housing to the water block, does anyone have a spare that they would ship to australia? ive had a post on the aus forums for 3 weeks and had nothing, if anyone can help pm me with price with postage, can pay...

Hey,Went through all the stuff i don't need/can't use, someone may need some stock GVR piping.GT35 hot side to suit Mitsubishi flange and 6cm manifold. Bought this for my "GT35" from eBay but mine was a T04E, images are attached of inner diameters for reference. Made by Precision turbo i...

I think my shifter is in bad condition, I made a brass sleeve to go around the bottom swinging arm With the adjuster and it made things better but as you can see I have the adjustment all the way out which seems to make shifts better. I want to improve on my Shifts and this isn't helping. Any...

Hey guysI resprayed my bumpers and am looking for some new chrome bumper trim. Any ideas where to buy it? Thanks

HeyI've had my 2.4 for a year now in my vr4 with a standard 16g running 16psi and making approx 250hp. The turbo runs out in the top end, struggle to make it to 8000 rpm.I want to get to a t3 as quick as possible, and I've thought about how I want to do it. Adaptor plate from eBay from td05...

HeyRecently in the past three weeks my VR4 has been starting on 3 cylinders for a period of about 5-10 seconds before the forth kicks in and the idle jumps to 2000, I have tried making it richer with no difference, I ran 2 bottles of injector cleaner through the tank and nothing. I know basics...

HeyI've had allot of drama's with turbo's since the ownership of my vr4. I have just installed a brand new TD05-16g, i used ultra copper thermal and i let it dry for 15 minutes before assembly of turbo dump and turbo to manifold. The 4 bolts keep coming loose.. i put red thread locker...

Hey guysI will make this as quick as i can.Cooling: Evo 3 Racing aluminum radiator 78 degree thermostat (now removed) Coolant and no blockage or airlocks Stock radiator fan shroud (Not sure)Stock TD05 turbo 3" stainless downpipe and turbo dump Ceramic coated inside and out EVO 3 manifold...

HeyI have an issue with my shifter assembly. it its worn out on the lower arm and rocks up and down which is really ruining my shifting. What can i do? is there an aftermarket bushing kit i can use to space it up and make it tight again?

Hey guysI have noticed this recently and i'm hoping that my head isn't cracked but i would like some advice on what to do. The car runs great and pulls hard, i have a 78 degree thermostat in my car and when i'm driving coolant temperature gets to 95-1xx degrees, it gets to 100 degrees and sits...

Hey guysWhat are some overall dimensions i should be looking for a inter cooler setup for my RS? still want to keep the condenser and fan on the front so there's not allot of room. Anyone got some build pics of there setup i can have a browse over?Cheers, Brock

HeyJust a quick question with 93 headlights, because you drive on the right hand side of the road in America, does the cut off in the reflector housing the opposite way around, i would like a set of 93 headlights for mine over here in AUS but i don't want to be blinding other drivers if the...

HeyJust did the FIAV blockoff but still have my ISC, i havent noticed to much of a difference yet, i just installed the plate, i've seen so many topics but none really clear on what to do. Do i need to do anything else other then route the water line from the water block to the lower water...

HeyI have a innovate MTX-L i want to connect up to my ecu input but can't use pin 15 as an input because no wire or pin is located there on a gvr4. I want to keep my narrow band aswell, i have my wideband on the downpipe, which wire do i use as an input? i just got the car running on SD and...

HeyI've been stressing out about this and i can't figure it out, my windows are stuck down so i can't drive anywhere or leave my car by itself. i've checked the switches, plugs and its all plugged in but when i go to the fusible link there is no power in that circuit, fuse is fine but nothing...

HeyI have bought a new timing cover when i built my 2.4l (Balance shaft eliminated) and i have some serious rub marks in my new timing cover which has almost made me consider buying a new one. I found this on JNZ tuning. Crankshaft sprocket spacer I still have my balance shaft belt on and...

HiIt's sad to build a fresh motor and spend all the time making sure everything is alright and works and be ruined by oil leaking after all your hard work. My oil feel for my turbo is leaking bad, under inspection, the top feed has been helicoiled, and when i removed the banjo, it pulled it...

Hey guysI need some help on getting my cam cover to fit, after i have installed my fuel rail and FPR i have no room to get my cam cover back on. Does anyone have any ideas to what i can do? is my fuel rail just simply to big? If anyone has some pictures of there set up could you post them...

HeyIm thinking of upgrading my water and oil lines on my TD05 but i want to hear peoples recommendations first. The Solid lines and banjo bolts do my head in because its a pain to install the turbo and take it off. The bottom water return that goes under the turbo and is a U shape is a m14...

HeyInstalling my wide band today and am already stuck, ECU pin 15, there is no wire coming out of it at all. How do i go about connecting my wideband now? i still have my stock O2 and have put a bung down lower in the downpipe for my wide band.Cheers.

Hey guysIve been having a ticking noise from the front of the motor happening that just started so I've taken my vr4 off the road. I've taken the timing cover off and found a little trace of oil around the bottom of the engine where the oil pump is, the balance shafts have been removed. Its...

HiRecently i have tried to install my clutch cut with no luck and now for some reason have lost all my MAF logging in live datalog. So, combinedft, maf Comp and raw, aswell as smooth rpm are all missing. If i check the DTC's i see error 0012 intake temperature circuit malfunction but the...

HeyI'm looking for some male plugs i need for my Aus or USDM, to a Facelift RS, i have all i need exept these two plugs, i need male connectors for the corner indicators and i also need the plugs for the city lights or driving lights on my headlights, pictures below, will pay asap as to need...

Recently about 3 weeks ago I have been having this clunk noise happen from underneath, it's after gearbox and transfercase. It seems tailshaft related and I can feel it through the floor under your feet on right hand side. It happens under load and directional change eg reverse to first. When I...

HeyI'm looking for a Third light for the wing, good condition with no cracks.Cheers

HeyAnyone have any spare Eterna Grills they would like to sell? would like no broken tabs and mitsubishi emblem intact. Not fussed on colour or paint condition. I'm Located in Australia Cheers

Will pay $30 shipped to Australia, cheers

HeyJust picked up a nice jpsec bar for my Aus spec. What is the go about changing it all over i.e the headlights and indicators? what needs to be done, do i have to buy jspec lights and corners, just bought mint condition fog lights to go with it too.Cheers

HeyJust picked up a RS bar for my vr4 and am in need of the caps that go over the screws at the end i hear their hard to find. If worse comes to worst, does anyone have a set of fog lights because they dont want to split the caps up away from the lights, cheers

HeyI have been having this problem with my clutch slave for a while now since i built my new motor and put a new clutch in.The clutch is a 6 puk brass button that was bought of eBay. It was installed and when the clutch pedal is pushed it was soft up top then really hard down the bottom and...

HeyHas anyone experienced this? I heard to remove the guards the bumper has to be removed correct? seems alot of work for such a small problem.. its collapsed an inch and a half once opened and is now slamming into the pillar when being closed.

HeyLooking for prices on what someone can offer me for a good condition Jspec rear bar with no cracks or damage, paint not concerned about as to needing a respray. Preferably in Aus or even better, Brisbane, Cheers

From japan brand new in packet. The model numbers are there if anyone needs them, i doubt Mitsubishi in Australia have these listed but it's worth a try.Cheers

HeyI'm in need of a new Turbo Compressor Outlet Pipe for my galant vr4 and it has the over the top setup. I found this one on ebay for an evo 9 but looks the same other then the barb is facing down. Can i use this, my other one is bent like a banana at the flange.Turbo outletCheers

HeyI sent my Valve cover in today to get powder coated and was told that he cant help get powder underneath the cover. Will this matter at all or will it do any harm to my engine?