The Top Mitsubishi Galant VR-4 Resource

Join the best E39A 1991-1992 Mitsubishi Galant VR-4 community and document your GVR4 journey.

  • Software Upgraded - Reset Your Password to Login
    In order to log in after the forum software change, you need to reset your password. If you don't have access to the email address you used to register your GVR4.org account, you won't be able to reset your password. In that case, follow the instructions here to regain access to the forum.

Search results for query: *

  • Users: birdman24
  • Content: Threads
  • Order by date
  1. WTB: Hood

    Looking for a clean Hood to replace mine that got destroyed. Prefer for it to be rust and ding/dent free.Thanks
  2. Intercooler core

    Does anyone know how thick of an intercooler core we can install on our cars? Also will a JDM bumper make a significant difference in that measurement versus a stock bumper?I know James Foster has a custom 4.5" on his car, has anyone done a 5 inch thick core?
  3. WTB: hood, front bumper, driver and passenger fender

    Got into an accident with 1471 and need to bring it back to life. If anyone has these parts and or a shell please contact me as I also need a core support.Thank you, Terence
  4. WTB: harness bar

    Looking for a three speed harness bar. Wondering if any of you guys are ready to part ways with yours.Thanks, Terence
  5. WTB: awd non abs proportioning valve (ACQUIRED)

    Looking to delete the abs while the engine is out. Prices shipped to 44120Thanks, Terence*no longer searching, one found and purchased
  6. FS: Parts I no longer need

    Selling some things I won't be needing anymore since I've upgraded. Prices do not include shipping or fees.1.FP recirculated intake with filter. $150 2.BEP HX40 .55 turbine housing. 4k miles. $225 3. Punishment racing externally wastegated recirculated o2 housing with tial gate. 7K miles. Held...
  7. WTB: 344 engine mount bracket

    Posting for a buddy that is in need of the front engine mount bracket.Thanks, Terence
  8. WTB: Non wastegated Holset hx-40 turbine housing

    Looking to buy a factory holset exhaust housingThanks, Terence
  9. FS: Fuel injector clinic blue max 1250cc *SOLD*

    Selling a set of blue max injectors that have 14k miles on them. Injectors have been cleaned and flow tested (1300cc's). Injectors come with all new seals and are ready to plug and play. Looking to get $280 shipped.Terence
  10. WTB: G4CS engine block

    I'm looking to start a new project since my engine is out of commission. Looking for a good condition G4cs engine block.Thanks, Terence
  11. WTB: Bottom mount divided T4 manifold

    Like the title says I'm looking to buy a bottom mount twin scroll T4 exhaust manifold. I'd prefer it to have two tial mvs flanges on it but let me know what you have.Thanks, Ternece
  12. WTB: complete and unhacked ecu harness

    Looking for an ECU harness with all the connectors, no broken wires, no corrosion or anything else that would cause me a headache hunting down.Thanks guys let me know what you have. I'm located in ohio zip is 44120. help me get 1471 back on the road pleaseThanks, Terence
  13. 3000 GT trailing arms: I'm slightly confused.

    Ok guys I'm planning on upgrading to coilovers over the winter and since I'm in there messing with stuff already I just want to do everything at once and be done. So this means I plan on accompanying the coilovers with 1G fwd knuckles to help with the front suspension geometry, adjustable upper...
  14. WTB: Engine harness or just an O2 sensor pigtail

    Hello Im looking to buy an engine harness or O2 sensor pigtail that is in good condition. A lot of my wires are either corroded and or brittle. Please let me know what you have.Thanks, Terence
  15. WTB: Silicone reducer

    I'm looking to purchase two 3" to 2.5" couplers asap and I would prefer it to be local so I can just pick them up.Thanks, Terence
  16. Thermostat pigtails

    Hello so as I was reconnecting all of my sensors I noticed that all of my wiring to the thermostat housing was very brittle, so brittle that as I sat down the harness three of the four broke off and one is currently missing.Does anyone know where I could get some pigtails to replace the...
  17. Engine mount bolt question.

    HelloI recently re-installed my Engine back into the bay and I cant seem to find the correct bolt to connect the engine mount bracket to the subframe. So my question is, does anyone know what size bolts are used to conjoin the engine with the subframe (front and rear) and the body (trans...
  18. WTB: J-pipe

    Looking to purchase a j-pipe that can clear the stock radiator and fan.Thanks, Terence
  19. Remote Oil Pressure Sending Unit

    As seen here: Web pageIs it really necessary to have one these? The only benefit from having this that I can see is there will be a stainless steel line around all the hot engine parts other than a braided nylon or clear plastic tubing.Any input is appreciated thanks guys.Terence
  20. WTB: 90 OFH

    Hello looking for a decent OFH, Let me know what you have. Thanks for looking.Terence
  21. WTB: Cylinder Head and Crankshaft

    Looking to buy a stock uncut crank and a bare cylinder head. May consider a head with just cams(not stock) if the price is right. I would prefer something local for inspecting reasons, but if the seller is willing to ship we can work out the details.Thanks, Terence
  22. WTB: Awd transmission parts

    Looking to buy the steel ball that holds in the output shaft and the bolt that holds in the speedo gear.Terence
  23. WTB: Crankshaft

    I am in need a 6 bolt crankshaft asap.Thank you, Terence
  24. Things to have done at the machine shop?

    I'm back again with more questions. I'm rebuilding my motor and I'm wondering what all I need or should have done at the machine shop? This is my first time rebuilding an engine so please bear with me.
  25. Engine rebuild: Crankshaft

    I tore my motor apart to find that the rod bearing for cylinder #1 decided they didn't want to do they're job anymore and spun a little. The bearings left very small scratches on the surface of the crankshaft where the rod bearing sit for cylinder #1. The owner of the machine shop said that it...
  26. head gasket size, 1.3mm or 1.6mm?

    I am rebuilding my motor and I am in the process of ordering all my new parts. The gasket in question is a cometic from extreme psi. Which size gasket is stock?
  27. Head bolt question.

    What size allen socket is needed to remove the head bolts?Terence
  28. Bolts needed to mount engine to engine stand.

    Does anyone know what size the bolts are? I would use the bolts that came off with the trans but they have been misplaced.Terence
  29. WTB: 23 spline output shaft

    Currently rebuilding my trans and when I took the shaft out my buddy noticed the splines were twisted just a little though. So I'm looking for a 23 spline in good shape for a decent price. Thanks.
  30. Transmission rebuild question

    Currently doing a motor rebuild and since I have everything out I might as well fix my trans problems. I have low clutch engagement and a grinding second gear. I want to buy a rebuild kit and install it myself to keep cost down. So does anyone know of a reasonable priced kit that will come with...
  31. WTB: 3000gt vr4 brakes

    Looking for a good set of calipers for cheap. Let me know what you guys have.thanks, Terence
  32. 3000gt brakes???

    Hi, guys back with a couple questions. I saw in the how to section that Garfield Wright used 91-93.5 3000gt vr4 calipers and 94-99 rotors, does it need to be these ranges of years for some reason unknown by myself? Do the calipers need to be from a 3000gt vr4 or will a base 3000gt have the same...
  33. WTB: Ecm/Dsm link

    Looking to buy Link, I already have a chip so a socketed ecu is unnecessary. Let me know what you guys have thank you.
  34. Engine rebuild questions.

    So my motor has developed a rod knock and since it already had a few other problems I figured it would be better to just rebuild it. I have never rebuilt a motor so this is a learning experience. I want to run forged .20 over 9:1 Wiseco, Eagle H-beams, Complete oem gasket set, Arp everything...
  35. Pulling less vacuum than normal. Is it normal or ok? Help please.

    Background info: On wednesday a buddy helped me install my Innovate wideband well neither of us had the tools to install the bung and sensor in the dp so he suggested we installed it in the o2 housing because he knows that it works from past experiences. My friend has built 3 dsm's so instead of...
  36. Radio bezel?

    Does anyone know if a 1g radio bezel can fit in our galants?The bezel: click
  37. EGT Problem

    Hello all I am new to Galants and owning a performance car so I will probably post some of the oddest questions on the forum unless someone has already asked it.Last night while sitting in 1471/2000 I noticed my EGT gauge was reading below zero, I turned the car off and the gauge went to its...
Support Vendors who Support the GVR-4 Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications RixRacing RockAuto RTM Racing STM Tuned
Top