I bought some seats for my Evo 1 GSR and it turns out they are bolt in for a Galant VR4. Before I cut them and make them for an Evo 1, I decided to see if anyone here is interested in buying it so I can modify a different set. Rear seats aren't pictured, forgot to take pictures but I have them...

Does anyone know if they share similar parts like suspension and exhaust. Engine and transmission are similar (besides transmission having an LSD and rear end having a mechanical LSD).

Feeler for sale: Mitsubishi Galant VR4 (4/1000) (Location Northern NJ/NYC)I finally finished the majority of my exams and decided to put the car up for sale this weekend. I will be selling the car WITH the parts for $5000 (Carbonetic Clutch alone is worth $1500+). I am selling because I am...

After a few people backing out, I have the Evo 2 LSD back up for sale. Sorry if you texted/emailed/pmed me, some of them I deleted because I thought it was definitely sold.Anyone that is interested, it is still here. First person to send me paypal gets it. $410 shipped. You can reach me at...

Well, I decided to sell the majority of the spare parts and extra parts I have lying around in preparation for selling the Galant VR4. Here is what I have for sale (everything located in Wayne, NJ). You can reach me at 973-900-0981 (text please). I will take better pictures this weekend...

UPDATE: I decided to put the car on hold until my exams are finished. I will starting, tuning and breaking in the car, at which point I will decide what I want to do with the car. 90% leaning towards keeping it nowFeeler for sale: Mitsubishi Galant VR4 (4/1000) (Location Northern NJ/NYC)...

Does anyone have a bellhousing? I need it for my Stage 3 TRE transmission that I have with its cracked bellhousing.Thanks, AlanText is the best way to reach me 973-900-0981

So after having my A/C in my car removed, I decided to put it back in. I have all the lines, compresor, drier, condensor, etc. Here are my questions:1. I read on here on how to clean out the lines and condensor (using brake cleaner and a air compressor). How do I clean out the compressor? Same...

Anyone ever see caps that look like this? They came with my built head....look extremely strange.

I am just double checking some information regarding degreeing my Crower Stage IV cams. I have all the tools but I just want to make sure I am getting this right.1. How do I measure zero lash? I made two adjustable solid lifters by putting a screw inside of them that can be threaded to move so...

Looking for numbers regarding how long your built motor lasted. I am curious to see how long they last. Obviously I understand factors such as power level, clearances and usage come into play but I am just seeing how people are making out.Thanks, Alan

I was wondering what are my options for replacing a rusty front bumper support? I was checking around my intercooler area when my hand hit the bumper support and it literally started crumbling away. . I plan to take the bumper off to asses how bad it is when I have the time in two weeks. I...

Looks for a decent set of OEM foglights.

As stated, I need an Oil pick up.

Looking for a bracket for a GVR4 A/C. I was going to trade with TransparentDSM but I would rather not bother him with that kind of stuff.Thanks, Alan

Well I have some stuff left over from my build that I decided to sell.- Set of FP2 camshafts READ I got them from a friend and after taking it to the machine shop, they told me that the lobe had been damaged on the exhaust camshaft. The intake side should be fine if you polish it. I will post...

I was wondering if it is possible or worth it to run a evo 1 front LSD in my transmission. I THINK they are viscous LSD (not sure if good or not).Thanks, Alan

Well after thinking about getting a 29er mountain bike, I decided to see what kind of roof racks were out there. I remember the roof rack thread and saw a bunch of them however, I am ZERO idea how it is held/installed on our cars.Is there a factory mounting point? Special trim? Etc.Any help...

I am looking for the ends of the set of crap shocks. I would use the ones on the car but they are KYB GR-2 and in GREAT condition so I don't want to waste them.click

I am looking for a crap 1G AWD flywheel. I am mainly looking for the ring gear. Let me know what you have!Thanks, Alan973-900-0981 or [email protected]

Putting up parts again. I have lots of interest in the parts but no one seems to follow through. As for the PTT Twin Disc, I am selling it only because I managed to get my hands on a Carbonetics Triple Plate clutch. I was VERY excited to run the clutch.Aftermarket - HKS Old School Green...

So it turns out the bellhousing that I had in my garage got tossed out by my mom. I could use a backup one so I don't have to swap them with my current transmission.Thanks, [email protected] or 973-900-0981

I bit the bullet and bought a PTT Twin Disc Clutch. I believe it is the High Torque Metallic version (not 100% sure since it isn't here yet).I was talking to a few people on a few different boards (and Street Surgeon) on here and there were recommendations to "upgrade" the clutch with other...

Looking for a 6 bolt crank that is in excellent condition, uncut.Thanks, AlanI will probably forget about this post but you can reach me at 973-900-0981 (texts preferred since I have school and work)

So I was going through the garage again and found a whole bunch of stuff. Decided to clean it out since I am moving soon. Prices don't include shipping.Aftermarket - Defi Blue Racer Boost (empirical) Gauge (took it out of the box, installed it, car never ran, decided to use AEM gauges...

Putting up a bunch of stuff that I have for sale. Will get pictures up ASAP.(1) - $50 - Set of ARP head studs. Person I bought them from said they were never torqued down or used. Only put them in the block. But also, the seller said these were L19 but they were not so lol I am going to just...

I seem to have a strange problem. I recently removed the clutch and flywheel to rebuild the engine. I am pretty sure everything went back in correctly as I have done this before. I will summarize it with a list:1. Without the clutch engaged in any gear, the car does not move. 2. The clutch...

Sold.

I was wondering if anyone knows the similarities and differences between a 1G DSM/VR4 and a Evo 8 ignition system. Reason being is I have an HKS DLI Type II and would like to see if it would be plausible to have it work on my VR4.Thanks, Alan

Looking to sell my MHI S16G for $250 + shipping. It came with my car and the previous owner bought it brand spanking new. This is a real MHI turbo, not a knock off, I checked when I pulled the motor. Turbo has less than 3,000 miles since I have only used it to break in my motor and DD to work...

That is all I need.Thanks, Alan973-900-0981

I was wondering if anyone knew where I could get a alternator connector plug from? Any junkyard cars share the same alternator? I can't seem to find one online and figured someone on here has to know where I could get one (new or used).Thanks, Alan

So I have been having this issue for a while now and figured it is time to ask to see what people think it is to give me a good idea what to look for. Here are my issues:1. Very loud noise when going straight and turning left (I think its a wheel bearing). 2. Car isn't aligned properly and...

Hey after finally finishing the tuning and replacing all the messed up electrical gremlins, I need a few small things to complete my task.I need the following parts:1. All the interior screws/plastic things that hold all the interior pieces and truck pieces (especially trunk pieces). Not...

Hey, I am looking for any 4WS parts. Will take pretty much anything!Thanks, Alanemail: [email protected] phone: 973-900-0981

So after chasing electrical grelims for almost 3hrs, I got fed up and just going to pull the harness so I can check everything outside of the car and/or replace that mess of sh*t.After I removed the ECU connectors, MPI connector, weird connectors on the crash bar, removed the grommet and...

Hey, I am looking for the mounting "eye" for the rear shocks.Pretty much this:Need it to weld onto the EVO8 Bilstien setup I have. Also the stock suspension is pretty much new so I don't want to butcher it.

Sold.

So after picking up a ton of parts and cleaning out my garage, I stumbled on a crap ton of parts that I honestly forgot I had. All prices are best offer. Worse I can say is no. I will take pictures tomorrow since I will be off for once. Does not include paypal fees and shipping.Aftermarket...

So after finishing my 2G/1G engine, I got an excellent deal on some forged parts and decided to start a second engine build on the side. I plan to do a semi-daily driver (maybe like 2 days a week) and shooting for around 650awhp (750hp at the crank) through a Holset VGT turbo.Here is what I...

Talking things out....seems like some personal issues came upWill post updates

I have (4) Ross Pistons 8.3:1 20 over with out any of the rings BUT have wrist pins and clips. I bought them to use in my car but then got a deal on a whole short block. You can get brand new rings on summitracing for $80~100. I will find out exactly which ones you guys need.These are for a...

Well, after fighting with this electrical problem for my AEM EMS, it seems to stem from a loose connection with my ECU plug. For whatever reason, jiggling the harness causes the AEM EMS to either read perfect or in this limp mode. I traced every wire and they all intact 100%. It seems to be the...

I am looking for an aftermarket intake manifold with or without a throttle body. I am looking for something NOT stock 1G throttle body flange (larger).Let me know what you got.Thanks, [email protected] or 973-900-0981

I was wondering, has anyone ever had this problem? I pulled my ISC because no matter what I did in AEM, the idle didn't move. I installed an old tan top ISC I had in the garage and it fired up and idle was adjusting like it should.I tested all the coils and they came back 40ohm (like this...

I seem to have a weird problem. My oil dummy light seems to be fine at idle but then lights up when I get to around 2k rpm. You think my sensor is bad? I will let you guys know tomorrow when I go above 4k (I was tuning the idle today and it got late).I do have the Balance Shaft removed, the...

How much power do you think 1600cc injectors can handle on E85 before they reach 90%-95% duty cycle.

I managed to find an excellent deal on Bilstein MR evo struts with Eibach springs.I won't be installing these coilovers until at least April due to me needing the Galant in the winter and the fact that installing this setup will surely exacerbate the suspension/alighment/wheel bearing problems...

Can someone tell me what this is? I noticed that mine was disconnected and curious to where it goes. I noticed there was a green and white wire disconnected coming from the ECU loom but didn't want to just connect things without knowing where it went.Thanks, Alan

What do you think? I decided to drop two solar panels to keep my battery charged all the time.And a wet shot. This was like 10 minutes after installing everything.Let the love/hate begin.