Let me know if you have one for sale, all the sites I'm aware of are out of stock at the moment.PIC for reference

Looking to find a way to lower my intake temps at the track, couple option.1. Turbo intake through the fender well cover and sit low and in the fender well. Only issue is my lower coolant line is in the way and would have to find a way to reroute.2. Cut a hole where the battery use to be...

Pulled for an upgrade, no cracks.Heat shield included. Ports match gaskets and said to flow better then a ported Evo III manifold. Thicker flanges and supposedly stronger due to more nickel content.-$SOLD

Let me know what ya got and how much shipped to Florida.Cheers!

Just need the switch for a switchable ground, from the diagram looks like I just need to connect 4 to what ever needs the ground then 5 to a ground.Its not working, does the switch itself need power or is it just mechanical?**EDIT I'm kinda retarded when it comes to wiring diagram...

I have one injector wire that looks like on its last leg, and would like to replace it with a good injector plug. I'd repair mine but the problem area on the wire it literally at the plug.If you have one with pigtails that would be great.

Rebuilt the entire clutch pedal assembly a few years ago but looks like that plastic bushing where the master cylinder clevis pin goes through ate it up already as I have some initial slop.Anyone find a drop in bronze bearing for that slot? Or anything else that would work, even if its...

4" FP intake with bov return.Powder coated wrinkle black and has -10an for catch can.$SOLD.

Let me know if you have one for sale.Thanks!

Went side exit so no longer need this laying around.Bottom of the flex pipe is a little torn up but doesn't go through and no cracks. I'll include a new one I have laying around. No rust, it is a bit dirty but I cleaned off a patch on each section so you can see how clean it gets.Not...

Cleaned at 15k miles, I put new seals on them installed once and ran them for 3K miles.Switched to E85, only reason for sale.$160 Shipped.

Close out sale on upper timing cover.click

Punishment Racing o2 recirculated housing.-No internal cracks. -Bolt hole is cracked, and used nut/bolt combo with zero issues.$150 plus $15 for shipping/paypal fees.

Upgraded and no longer need these, gas only and cleaned 12k Miles ago.$160 shipped.Text (907)707-4478

Upgrading to larger injectors for my next setup, zero issues. Cleaned when I purchased them and have put 12k miles on them with pump gas only.$150 shipped!

Found a set!Thanks, Joe

Finally upgraded to an HX40 and selling this setup.12K miles on it, zero issues.One broken stud in the BEP housing that will need to be drilled and tapped.$500 shipped and PP'd.Pics aren't working, you can text at (907)707-4478.

Looking for the big and small wastegate springs. Let me know if you have one/both and how much shipped. Thanks!

Looking for an o2 sensor plug from the engine side of the harness.

I've decided to control meth injection through link using the EGR tab. I know I have the relay all hooked up correctly as when I ground the ground wire it kicks on, yet when I have it plugged into the EGR solenoid plug it won't engage. I either have the wrong plug, EGR is the one near the...

Looking for another one! Let me know what you have.

Good dude, quick payment after agreeing to buy and great communication. Would buy/sell again without a hesitation. A+

Complete stock IC kit asking $50 plus shipping.

Small sealed catch can with drain. Asking $25 shipped.

Looking to get $250 plus actual shipping.

Looking for the stock actuator for the 14b. Let me know whatcha have!

Looking for a Jpipe for a 14b turbo. Let me know if you have one.

GT35R, .70 A/R, t3 flange -$600 shipped T3 tubular manifold by looks like DNP/Dark Performance $SOLD Tial wastegate -$150 950cc FIC injectors -$SOLD Greddy type-S BOV -$SOLD 2g DSM AEM EMS V1 -$SOLD 8mm Accel +300 thundersport plug wires $50 Spark plug cover -$50 Centerforce 6 bolt...

Just pulled them today to install evo seats. Zero rips or tears and in great overall condition, but does have some signs of wear. Trunk access door cracked but does still stay latched, could be glued I'm sure. (pictures inlcuded) All previous owners cleaned and conditioned regularly, as I did...

So, I'm looking for a few parts to put a project back to stock. Its a 95 TSI.1. Turbo (stock 13g or 14b) and stock 2g J-pipe. 2. Stock injectors 450cc 3. Stock ECU4. Still looking for a blacktop CAS, if you still have one let me know.

Let me know what you have!Thanks, Joe

I have a Nexus 6 UNLOCKED for sale.-Midnight Blue -32G -Zero scratches on screen -about a month old and come with original box, charger, and cable.Price is $500 plus shipping.

One 12" Perma-cool and one 10" Perma-cool fan with low miles bought with this build.Asking: $45 shipped each

I'm looking to replace my beat interior carpet. Let me know what you have and please send pictures and cost.Thanks, Joe

Looking for a set of evo 9 seat rails for gvr4 install.Let me know what you got!

B & M OIL COOLER (11" X 5-3/4" X 1-1/2) 5 miles on it, but could use a good clean came off a spun bearing motor. -$50 shipped

Clutch has aprox. 3k miles on it and 1k of it was break-in miles. Asking $200 shipped.

Let me know what you have.

Let me know how many you have, I'll need all of them for mine as I have none at the moment.

Looking for Leather front evo seats and maybe rears if you have them. Also if you have the rails to mount them let me know.

Okay, I'll start with this. I have it setup like this image, I'm using Link to activate through the FPS controls.Link setup is: start at 1500rpms and stop at 2500rpms for testing. Everthing else is zero'd out.When I start the car the diaphragm closes the valves so I know it has vacuum, but...

Trying to get my Cyclone manifold setup using Link with the stock FPS. It's been so long I forgot where the plug is located, if someone could snap a picture and/or give me some wire colors that would be greatly appreciated. Also any advice on setup would be good, is this image still correct...

Looking for the stock fuel pressure solenoid. Let me know how much shipped to 32547.This is what I'm looking for. Has Two vac hose nipples, 1 plug, and an Oval vent on the top.

Going to be trying to locate some Evo 9 SSL seats soon and have a few questions. I'm 6'3" and looking to lower the seating area and wondering how much head room you guy gained? I know the Curtis brackets are made of what looks like 1x1" and wondering is it possible to get it lower then that...

Like the title states I want to install a stock Evo stereo and trying to figure out where I can get a pigtail or wiring harness to install it. Any advice from someone who has done this already would be much appreciated.Thanks!

I'm trying to get an idea how to make it a clean install. How did you guys do it with your new custom shift knob? I picked up a VR6EATER leather boot but doesn't look like the open will come up far enough on the new knob to cover the base.Post up pictures and ideas!

Looking for this steering wheel, let me know if you got it.

I'm selling a brand new GT500 hood vent that was never installed. Looking to get $80 shipped.

I'm looking for the white vacuum canister for the JDM cyclone IM. Let me know if you have one.Thanks, Joe

Couple items for sale that I won't be able to use on my next setup. All items are PLUS shipping and PP fee's.low miles 3 row 2.5" thick CXRacing aluminum radiator with 14" fan -$SOLD!10" slim fan never used, only mocked up -$SOLD!BNIB Upper radiator hose -$SOLD!BNIB...