The Top Mitsubishi Galant VR-4 Resource

Join the best E39A 1991-1992 Mitsubishi Galant VR-4 community and document your GVR4 journey.

  • Software Upgraded - Reset Your Password to Login
    In order to log in after the forum software change, you need to reset your password. If you don't have access to the email address you used to register your GVR4.org account, you won't be able to reset your password. In that case, follow the instructions here to regain access to the forum.

Search results for query: *

  1. Turboman_456

    Leather Shift Boot.

    I made my own I bought a leather shift boot on eBay. Cut it the length that I needed, I took the stock rubber shift boot and cut to the top of the boot and only kept the base then,I glued leather boot to the base and use clamps to make a nice tight seen on the boot. There is a pic on page 5...
  2. Turboman_456

    Aftermarket Steering Wheel

    I have a leather wrapped four hold Grant in my GVR4. Here’s a link for the hub adapter. click Some people don’t like Grantr because the hub is 3 bolt instead of 5, but I have had no problems from it in the years that I’ve had the steering wheel, there are pics in the pictures threat. The...
  3. Turboman_456

    Cadillac CTS V calipers

    Is that what that plate does that Strictly Performance sales with their kit, shims the rotor?
  4. Turboman_456

    Cadillac CTS V calipers

    Has any one done this mod if so, what rotors did you use?
  5. Turboman_456

    Key Fob

    No not that one, the switch blade key.
  6. Turboman_456

    Key Fob

    I bought a key fob a few years back, broke it recently where can I buy a blank key❓
  7. Turboman_456

    WTB: Front Power Steering Rack

    Front power steering rack GVR4, not eclipse.
  8. Turboman_456

    WTB: Early DSM Leather Shift Knob

    Hey I am looking for a DSM I guess you would call It a pistol grip shift knob.
  9. Turboman_456

    Muffler suggestion - looking for a bit quieter

    Quoting 4dr_psi_awd: I'm running 3" from the turbo to a cut-out with a resonator in between. After the cut-out it goes to 2.5" with a Dyno-Max 2.5" Super Turbo muffler. It's barely louder than stock with cut-out closed, and doesn't drone. With the cut-out open it's not too bad due to the...
  10. Turboman_456

    hood vents

    I was thinking 2 inches further back but it turns out to be in just the right spot, the water funnals off the back of the vents on the inside under the hood to the ground.
  11. Turboman_456

    hood vents

    I cut these vents off of a 86 Chrysler ES300. And they are functional.
  12. Turboman_456

    Ohio or bust

    Quoting vr4play: I'm in Cincinnati. There is only 1 awd dyno in the city. Not sure if he know dsmlink or not. It's my buddies shop. If you ever need suspension work done or an alignment give me a call. I can do anything but our shop specializes in suspension.One AWD dyno that sucks. They...
  13. Turboman_456

    Ohio or bust

    Quoting turbowop: Worst. Move. Ever.I would agree if I was moving down south yee haa.
  14. Turboman_456

    Ohio or bust

    Quoting G: Salt.Underbody treatment and drive my wife's car.
  15. Turboman_456

    Ohio or bust

    Well it's official I am moving from the Pacific Northwest to the Midwest. My car has been feed a steady diet of back wood River Roads ,P I R racetrack, cars and coffee the occasional DSM/EVO drive an some expensive pampering from English Racing. So what's the car scene like in the Cincinnati...
  16. Turboman_456

    EVO X Wheels

    Sweet! Thanks and I feel you on the cops.
  17. Turboman_456

    EVO X Wheels

    Hey has anybody swap the set of Evo X GSR or MR wheels? If so I would like to know if that 8x5 wide wheel fits flush under the fenders or do they protrude?
  18. Turboman_456

    New guy from Mass with a 4G63 Ram 50 and now a GVR4

    The truck is sweet dude. I am swapping a 1UZ into a 84 Toyota pick up extra cab.
  19. Turboman_456

    458/1000 rehab - now jdm pretty

    She looks good.
  20. Turboman_456

    hood vents

    I picked up a damaged 280ZX hood that I am,going to have the vents in it cut out and put in my hood.
  21. Turboman_456

    EVO 8 Intercooler into a GVR4!

    They work just fine I have one in my Gray Lady and most importantly and uncut bumper. Keeps that sleeper effect going quite nicely.
  22. Turboman_456

    Why do you love this car?

    To me she is one of those iconic Japanese vehicles like,REPU or GT2000, and let's not forget on the American side Buick Grand National. Even back when I had a WRX, I would gawk at VR4s, for they were the first and few. I bought my Gray Lady out-of-state. I flew to San Jose California...
  23. Turboman_456

    New drive shaft one piece?

    The driveshaft shop has the best option for a drive shaft it replaces two of the three sections on a Galant. I am going for one of these myself when I save the money or just put it on the credit card what the hell.
  24. Turboman_456

    evo8 ecu

    I have a friend here who tried using an Evo eight ECU could not get it tuned right kept throwing codes and he could not tune more than 260 WHP he dropped it and went back to map translator. I considered it since ECUs can be had for 150 bucks or so.English racing here suggested DSM link was a...
  25. Turboman_456

    heated seats?

    I have seen the heat elements on eBay. I considered getting a set I'd need to take the seat to a reupholster to have the units put in I rather have mods luxury items later i.e. tinted windows radio heated seats.
  26. Turboman_456

    1945 is now mine!

    Looks good born-again hard!
  27. Turboman_456

    FS: Parting 379/1000 BG Almost everything can go

    Pmed you about Pillowball mounts.
  28. Turboman_456

    Spoiler???

    Quoting omertaitalia: did you try calling him?No I have not I figured since he didn't answer my text I wouldn't waste my time trying to call him I don't know this dude I don't have any money for him he might see it as wasting his time . Just a thought.
  29. Turboman_456

    Spoiler???

    I have been trying to get some info on this Spoiler on the back window.The owner dose not answer emails or text.Dose anybody know what kind it is or were to get one or for that matter is it Galant specific or another vehicle that works on Galants? LINK click
  30. Turboman_456

    Hood River Run HRR PNW guys......

    It's that time of the year again! Come join the English Racing crew for this years annual Evo / DSM Hood River Run.What: 13th Annual English Racing Hood River / Char Burger RunWhen: October 8th 2011 9 AMWhere: Vancouver MallWhy: Because it's funHow: Come filled-up and ready to go...
  31. Turboman_456

    WTB: 2G Cam Gear Cover

    Black cam gear cover no cracks.
  32. Turboman_456

    VR4 Pictures Post Here !!

    456/1000 My Gray Lady.
  33. Turboman_456

    cowl induction type hood?

    Look into a LUND cowl they can be placed on your hood.
  34. Turboman_456

    What is the best looking color on a Galant

    Personally the white on white looks the best when guys keep them clean.My VR4 is gray which I refer to as My Gray Lady.
  35. Turboman_456

    Ebay clutch?

    Stick with trusty ACT 2600 or 2800!Stay away from those cheap as* F1s unless it is a solid hub unit.I just spent a total of $235.00 for my clutch on Ebay $135 for a ACT disc new and $100 for a used ACT MAX XX pressure plate.
  36. Turboman_456

    Best Looking Shift Knobs

    Stock it has a good feel when shifting and the colors right.
  37. Turboman_456

    WTB: 2G Cam Gear Cover

    I am looking for a 2G cam gear cover black on creaks.
  38. Turboman_456

    IS THIS WORTH 90$

    If you run out of Water Methanol your engine goes byby
  39. Turboman_456

    IS THIS WORTH 90$

    Spend a little more money and get your self a Water Methanol system,then you will not need to be concerned about your intercooler,and you will gain the power that you seek.Just do not run you of water meth LOL LOL
  40. Turboman_456

    Car jitters on downshift and acceleration

    It sounds like carrier bearings to me my car did the same thing,the design of the carrier bearings allows the drive shaft to float to reduce vibration but when the rubber bearing wears out it will allow more movement under torque.If you have the time or get a chance to get under your car grab...
  41. Turboman_456

    Turbo question

    That is a nice unit.I was not aware that there was a Dual Ball Bearing turbo for the DSMs that was not some big ass GT35R or something like that.I think I'm in love.
  42. Turboman_456

    Some CF pieces to think about...with pictures

    I have askes about CF cam gear cover.The only guys I have seen with them are the Aussies,and they don't return PMs
  43. Turboman_456

    what type a bulbs are used in our cars. doors, dome, license plate...

    Quoting brunoboy: so DE3021 is the bulb i need for both doors and dome, what length is the bulbs though?31-33mm -ShaneDE3021 yes both,I do not know what the length is,the fit is tight the bulbs fit in the holes at the end of the fixtures.
Support Vendors who Support the GVR-4 Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications RixRacing RockAuto RTM Racing STM Tuned
Top