I held onto this hoping to use it with my new project but it's proven to be too small for my setup. I am asking $800 plus shipping fees, I may consider trades for something bigger. The turbo spins freely and has very little play, no more than I've seen in any other ball bearing turbo. One of the...

Got a few too many projects going on. Time to clear some things up. Going to post things up as I sort through and find them. Prices do not include paypal fees or shipping costs. Buyer is responsible for shipping costs.Stock 6 bolt short block with BSE already done.$400 Stock 6 bolt head...

Well most of you know I recently purchased 1411 from Mitsuturbo. After picking up 555 he just wasn't able to give 1411 the attention it needed to be restored. This is the first car I've ever bought that wasn't a running and driving car from the get go. The best thing I can say about that is that...

Need to get rid of these as they will not work with my new turbo. Only trades I would consider are 950 or larger injectors or an FP O2 housing.Evo 550 injectors $120 shipped.2g O2 housing ported $75 shippedEvo MR gauges $60 shipped- does not include the wiring harness.

I'm getting ready to start ordering parts building my head. I need opinions and suggestions on some of the parts I've chosen; also I would like suggestions on parts I have yet to match up with my build. The head is stock 1g/GVR4 for anyone that is wondering. I plan on reusing the valves that are...

Just seeing if there was any interest in a NB 93' grill or 89' Tail lights. Both are in pretty good condition. Asking $45 shipped for the grill and $100 plus shipping for the tails.

Ok changing a few things up so I have a few items for sale.These do have some curb rash form the PO, but no bends or cracks. Holds air just fine. Tires appear to be fairly new with no uneven wear. Evo MR BBS wheels with newish Continental tires 245/40/17 $700 oboWilling to trade for a...

I recently got two Corbeau CR1 seats, but I decided not to use them as I don't fit them very well. These are used but good condition. They have sliders, but no mounts. I'd prefer local pickup, you pay shipping costs if you really want them.Asking $300 for the pair or $150 for each...

I have decided to take another route and completely go with a new platform and engine all together. I have alot of parts left over from 192/1000. Some are stock items and a few aftermarket parts. All prices are obo and do not include shipping. Buyer is responsible for shipping prices. Everything...

92' Galant VR-4 192/1000 Nile BlackReposting this unfortunatelyemail: [email protected] cell:336-710-5287link to pics. clickEngine: Cometic gasket kit cometic mls headgasket arp headstuds manley Ti valve springs and retainers S.I. S.S. Valve stock size Acl main and rod...

Well now that its got a new engine. I would like to take it to the track for an HPDE day or Auto X. I'm wanting to get your inputs on other things to check. I have done track events/auto x before but it was with my evolution. So I didn't have to check much.Here's what I got so far. new...

Saw this on a local forum. They make suspension for our cars. They also have a GB going on on Tuners right now. These are spittle more than K sports/BC racing. But they have several spring rates and you can swap in swift springs on there setups. I've never heard of them. Just thought it was nice...

Originally was going to use this to do a AWS delete. Now that I'm moving I won't have room to take it with me. I need this gone. I pulled this from a 90' GSX. Please someone come gets this before I send it out for scrap. PM me or call me at 336-710-5287

pm me or text me at 336-710-5287.Josiah

This car is a complete 89' the seat belts were trashed but if anyone wants the taillights, underdash, or grill pm me or call me. These were all in good condition. The interior was blue BTW.

I've had these wheels for a while but decided not to use them as I want something thats wider. It is a set of four. About the only thing they need is a good cleaning, as they've collected some dust from setting. pm me or call/text me at 336-710-5287 JosiahI would prefer pick up as shipping...

as the title says. I have these items for sale separately from my Galant as they were never installed in my car.I will get more pictures for the rest of the items.Calipers- $150 plus shippingHarness bar- $165 plus shippingHarrys linkCurtis seat brackets- SOLD...

92' Galant VR-4 192/1000 Nile Blackemail: [email protected] cell:336-710-5287link to pics. clickEngine: Cometic gasket kit cometic mls headgasket arp headstuds manley Ti valve springs and retainers S.I. S.S. Valve stock size Acl main and rod bearings stock...

Ok so I've come to the part where I'm doing the BSE. Well I noticed that the bearings had been removed by the machine shop. Not a big deal I got new bearings with the kit I ordered. Now going with the VFAQ guide, I'm having an issue with getting the back bearing installed. Using the balance...

Good trading with you. Parts arrived shortly and without hassle. Will gladly do more business with you again in the future.

Decided I'm going to do things alittle differently and put some of these items up for sale. I am open to trades, so just ask.Everything is obo and you will have to pay shipping.GT3076R SOLD!Desert Tan Hyundai VC $60RC 750 cc injectors pending saletow hook $40Blitz...

Well as things would go. Blew the engine on the way home from Winston Salem today. Pretty sure I threw something out of the bottom. Won't know until I look at it tomorrow since it was already dark when I got home. I also may have had my emergency brake line snap on me. After we got it towed back...

I finally got a regulator to replace the right rear one that had not worked since I got 192. Now this wasn't a difficult task but it could easily have gotten confusing. There are six bolts that hold the motor and regulator onto the door. The most difficult to deal with are the two screws that...

It's gone...

Test went ok. Just thought I would share my results.Cyl. #1 145 Cyl. #2 120 Cyl. #3 145 Cyl. #4 145Now I know the next step to see exactly where #2 is losing compression is a leak down test. I've checked with all the local auto stores and none of them seem to carry the tool nor can they...

I've tossed this idea around for a while. Mainly this was brought on by an old roommate who almost totaled his subie by kissing a civics rear bumper at under 10 mph. it did quite a bit of damage to the front. Now I know the norm with alot of people is to hack up the factory crash beam or remove...

Well after the whole fiasco with the alternator going out and taking a few things with it. I've been able to replace or repair a number of things. The only thing I've haven't been able to fix is the seatbelts. I've replaced both of the fuses in the car. The only thing I can figure is that the...

Ok I was a tard and left my parking lights on while at school yesterday. I got a jump and drove home. I noticed on the way home I was getting a electrical whine for about 500 rpms. Around 2700-3200. Everything was working as far as I could tell. Well went back out last night and noticed a bunch...

One of my friends replaced some of the relays on his Evo X. They have some issue with the fuel pump relays blowing and killin the engines. This brought up a discussion on replacing the relays on my car with newer style relay. Has anyone done this? Is it possible to do using the factory...

It just started this today. When I start the car the brake pedal will fluctuate. It will move towards the floor but no more than an 1/8 inch and than immediately return. Brake fluid levels are normal and I had the brake pads and rotors replace over a month ago. There are no other issues with the...

So original plan was for a 3076R on 192. But I've been debating on possibly downgrading to a bolt on 50 trim since I know that will yield me my power goals and then some. I've done the 16G before and I would rather keep it in the larger frame. The power I'm looking for is around 350-375 whp on...

I've never seen anything posted like this and search came up with nothing. Is there one for our cars? I know these made a noticeable difference in Evos. I'm pretty sure these could be made using the rear bumper support holes.Link to Evo trunk cage.

I've done a few searches and didn't come up with the answer I was looking for. I know the fenders and corner lights are different. The hood, headlights, grill, and bumper looks very similiar if not the same. If this has been asked before please give me the link. Only reason I ask this is for...

Ok my car is and will be street driven more than it is raced. being that I see a more positive use with a cast manifold. Now the turbo I will be using is a GT3076R. As it stands its a T-3 flange with a welded on V-band for the O2 housing. If i leave it in this setup I would be able to go with a...

Is it possible to replace this piece or do i need to just go ahead and replace the headlight(s)? I mean the piece the secures the light to the housing? I have plans of installing 93' headlights but not at the moment.

After replacing the front chassis harness and a bunch of other little things. I was able to start 192 today and hear her run for the first time in over six months. big thanks to Curtis for explaing how his radiator bracket works and Ryan at TRF for making the battery bracket. There is still alot...

ok so my passenger side rear window does not work. the motor is bad and the cable is all twisted and is of no good anymore. I have a spare motor i know is good that i pulled from the galant parts car i had a while back. only problem is the cable on that one was messed up as well. ive searched...

I decided to remove my cruise control and install a N/T throttle cable from a 1.8 N/T since mine did not work. I know i've seen a couple of threads where people have asked about this or done it but no one has really posted pics. I've even tried several searches before hand to make sure I wasn't...

Well since the weather has finally improved. I took the opportunity to work on 192. After the issue witht the burnt harness; I bought the front end harness from NateCrisman (Big thanks btw) to replace the one that i suspected of being destroyed. Just taking my time things went pretty smoothly. I...

If this has been asked i apologize, I tried a couple different searches and all it came up with was the steering wheel. My question is this, has anyone attempted or swapped a steering rack from an evo to a galant. I thought of this since it is possible that i may have to replace the steering...

ok the engine that is in 192 right now needs the head rebuilt. I have another engine i pulled from a GSX that i will be doing a full build on overtime. But right now i'm comtemplating having the extra head rebuilt and maybe tossing in some cams. than putting it on the engine thats in it now so i...

I have the possibility of purchasing a GT3076 for cheap from a friend and was looking at possible setups for it. Now i have seen the reviews they have on dsmtalk and tuners about this kit and how well it works for DSM's and i am interested in maybe purchasing it in the near future. Do you guys...

i have a friend that is parting out his Subaru and i will more than likely take up his offer for his GT3076. For you guys with a non mitsubishi turbo, did you have a custom setup made, part of you a kit, or what? i've looked around and i'm really not finding what to do about O2 housing. i know...

Well today had been going fine until i got back from a quick drive with the car. i notice when i get out of the car that my headlights are still on. strange because i never turned them on in the first place. i check the switch, nope it's off??? as i walk around the car i notice that my reverse...

ok when i bought 192 the previous owner had the belt off the PS saying that the pump was bad. Well i bought a refurb and swapped the reservior from a Eclipse GSX. i've read thru a few of the aws removal guides and what not to see if i could find an answer. well the car is still somewhat hard to...

Hey everyone, my name is Josiah and I've been addicted to 4G63's for 8 years now. Lol well yeah I'm not new to the DSM scene but new to GVR-4's. Bought my first DSM in 04'. It was a 92' Talon TSI, kept it running and tastefully modded for about three years when I bought my 05' Evo MR. After...