I was just visiting my friend at the hospital and he was calling me a ***** because I wouldn't own a Galant VR-4 again. I booted this website up for the first time in several years to look at the Cars for Sale section and this was the top post. I can say without a doubt that this car is...

Wish you would have posted this earlier! I'm close and just threw away all my old 4-lug stuff including new rotors and everything :/

Okay, so every part for this car is gone except what is listed here. $100 + shipping takes it all!!!

Sold a couple things, dropped some prices. This stuff is screaming sell meeeee

bump, still looking to see this stuff go to a good home!

bumpski

Paypal claim #PP-002-643-325-163 Resolved in my favor.I sold him a set of injectors, and throughout the whole process he was difficult to work with, has poor communication, and tried to rip me off. He sent me a PM about purchasing a set of yellowtop 510cc injectors, and I saw that he was...

Sold a bunch more stuff recently, almost got ripped off by a fellow local forum member(will be posting bad guy thread with info shortly). Gonna go through the rest of my garage this weekend and pick out what else I have left. I want all reminants of my dsm stuff gone so I do not get the itch to...

All alternators, yellowtop injectors, and cams are SOLD. Stuff is going fast!

BUMP!!I sold the shell and some more stuff.I am moving out of the DSM game for the time being, have other ventures to persue. Let me help you get the parts you need while you help me empty my garage!!

sold

I do not have the exact mileage, but it is 144,XXX. I have owned it since it had 142,439 miles exactly haha. ZERO rust on the car, has always been on the west coast. I have the clean title in my name in hand. I have a printout of the autocheck report, and I can provide the VIN for a carfax...

As the part out of my drivetrain is dwindling down, I still have the shell. Interior and exterior are still intact, and I haven't pulled any pieces out of it as I want to sell it whole. Comes with most of the underhood components minus Engine, trans, ECU. Has exhaust and fuel pump still in...

776. I pulled it off last night, everything looks good. I was going to bring it to the machine shop and get it cleaned and to double-check my flatness test.

Okay so as of tomorrow I will be 100% current with shipping out all items.I go back to school this week, so I want this stuff to move!Lets make some deals people! I have already damn near given away a ton of stuff.

OFH is sold. Taking offers on the shell as I really do want to see it go. A good home for it would be a good bonus..

Updated a TON more parts, and I dropped the price on the shell substantially. The only things the shell will need to drive are an ECU setup, and the motor/trans. I am not taking any of the major parts off of it, so it will be easy to get on the road. Trying to clean out the garage

I have one, full stainless from master to slave

PMs replied, bunch of parts added. Lets make some deals here. Would like to see all of this stuff go to a good home.

Called ya back Mike. Just letting people know, I am trying to keep the minor shell pieces with the car, as I am trying to sell it as a roller than needs a drivetrain to be a fully operational car at this point. Thanks

This is it. Everything I have left from my Galant. Lets make some deals and get this all gone!Lucas 702-371-4127 [email protected] (mitsubishi OEM, cant remember if it is 7-bolt awd or 6-bolt awd) $15+shipping ECO/PWR Switch w/ pigtail $15 + shipping (Can...

Thanks! I get comments on it wherever I go. Really trying to sell this and my VR4 so I can buy a bigger boat that can sleep my girlfriend and I on overnight trips. Really surprised this hasn't sold yet at this price!

I am trying to sell my VR4 and my boat in hopes to purchase a bigger one by the 4th of July. So here is a copy paste of my ad from another forum. This thing is also babied like my car has been. And I know it is a long shot posting it here.ThanksLucasUp for sale is my 76 Hallett...

I have a great shape dsm one that is grey with the red lettering. Lmk if you're interested after talking to the other posters

If you're serious, pm me to see if we can work something out

Mishimoto Radiator SOLD, updated thread.

Wideband is sold.I am replying to pms and emails nowWill be posting more things tomorrow hopefully when I get some more free time. Thanks

I'm looking to sell some parts that I have had sitting around my garage that I was going to hold on to, but it is taking up way too much room and I would like to see it all go. I have a ton of stuff that is not listed yet, so if you need something, just let me know. All prices are a...

Thanks for the replies guys, I think I am just going to run a dedicated line from the battery in the trunk up to the stereo and not worry about it. Pulling the fuse block just seems like it would take longer anyways. I have a breaker for the car so I will just trip it.

So I am about to tear in to my car to get a few wiring things taken care of. First, would it be safe to run an AEM UEGO, lightbulb(for autometer mechanical boost gauge), Greddy Profec-S, and the alpine CD player off of the factory stereo wire? If not, should I run a separate line from the...

I didn't see anyone replied to this! haha sorry for the delayed responsesQuoting wsuits: Do you have a rear power steering pump for a 92 GVR4?I do, however I am unsure if I am willing to part with any of the original parts from my car right now. Ill let you know if that changes...

Most people use a datalogger, either home made or by purchasing one premade. You can hook it up to a palm pilot and keep it in your car, or do what I do and hook it up to your laptop if it is a USB cable. It makes it so you can read codes, log most the sensors with various programs (TMOlogger...

Im pretty sure that it is linked to the Eco/Pwr mode from the non cr-4 model galants. If I remember correctly it affects the steering.

Woo! My car's older brother!GLWS

I'm pretty sure that it is a 3.75" I used a 4" from my old 2g mas to my fp intake and it was bigger than the oval.

I did a run of 1/0 from the battery in the trunk through a 200A breaker straight to the starter, from there in to a 100A fuse under the air filter that runs to the alternator. I was able to delete the factory fuse box that bolts to the battery + terminal as well. I ran a few 4awg ground in the...

Are you looking to set it and forget it, or would you like to be able to tune it yourself and make changes as necessary?I use Jackal and I dig it, dsmlink comes to mind, among other not as indepth methods either such as an SAFC, MAFT, etc.

Not trying to thread jack, but I could also use a passenger side corner light with a pigtail. Once the OP gets a set pm me I would like to purchase one soon, thanks!Lucas

Well I ended up taking the gasket off of one cap and stacking it on the other. I drove it about 5 miles and it seems to be holding better. I guess I will see how it works out, and if there is a better cap I can put on there, or even an additional gasket just to make it a tight fit. If all...

So Ive got a civic radiator on my car (Bought it from Garfield, looks like it was an XSPower). The cap leaks coolant. I tried the 0.9bar that came on it, and a plain 1.1 dsm cap. The caps don't seem to have a very tight fit, is there an easy fix for this? Maybe another gasket on it? I just...

MB297732Thats the part number for the oem part. I believe that it is 13mm thick as well

My ostrich 2.0 didn't come with a disc, and ownership is transferrable on ds-map just pm Hak. Good luck on the sale man!

Does anyone replicate the Monte Carlo stickers?

Yeah sorry for the late response but I do believe that there is a valet key. The dealer told me the key I was using could be one, and they charged me to look up the code from my VIN, which was the same code that was stamped on my original key. There might be a valet key, but im not 100% on it...

Same thing happened to me. I locked my glove box and it wouldn't open at all. I tried getting a new key cut from the old worn down one at a hardware store, it worked but it wasn't close enough to unlock it. I ended up having the dealership do it for me, and when I put it in the glovebox it...

It should bolt right in. I went to install one on the old motor that was in my car, and it was a 7-bolt and it didnt fit. Just a piece of advice if your car had gone through what mine has haha. You could just put bolts in the cooler holes, or run a cooler. I used steel braided lines and a...

The actual clip that slides into the metal piece at the top is busted off, I could try to fix it though. Also, both the plastic clips that mount to the body are missing and I would like to replace them

So the top clip on my driver's a-pillar is broken, and it likes to just fall a bit on the top when I hit some bumps or anything in my car. I was just gonna drive a screw through it to hold it there, but it would hit the seatbelt track. Does anyone have some suggestions on what I could do to...

I have a 90 trans in my car, all I needed was the 22-spline t-case and the shifter brackets that are bolted to the transmission from the 92 trans. Works great. I also have a 90 3-bolt lsd rear on my car. Works great

clickI used this piece on my vr4 and works great with the stock return line. I found it cheaper on ebay though just search the part number