SOLD.

As stated various galant owners manuals in good condition with sleeves $25

As stated a complete manual seat belt conversion kit the most complete I've seen all plastics are fresh Seat belts are a little dirty but I know you don't care clean them up before install $250 obo.757-641-7084 Markanthony

Teaser photos:Please feel free to contact me with any questions 757 641-7084.

I have a grey driver side a pillar no broken tabs and a black 92 grille also nobroken tabs $25 pillar $40 grille Prices do not include shipping or fees.

Cleaned out the garage and came across some stuff and a mint driver side a pillar. No cracks or broken tabs i dont have a gvr4 anymore so this can go. Looking for $25 plus shipping and fees.Bc single spring and retainer kit-$100 Prices are shipped but paypal fees not included add 3%

As stated a nib gvr4 model.got this with the intent of building into the likeness of 1505 but thing change I dont know what it worth and dont remember what i paid. I havent been able to find one thats the same on ebay So ill say $50 obo shipped in conus.

As stated a nib gvr4 model.got this with the intent of building into the likeness of 1505 but thing change I dont know what it worth and dont remember what i paid. I havent been able to find one thats the same on ebay So ill say $50 obo shipped in conus.

Dont know what this is worth but its been sitting around for awhile now and its time for it to go. I know this is not ebay but make an offer.

As stated a new precision 750 core never mocked or mounted just went a different route Looking for $325 shipped.

As stated pump has about 45sec of run time,had oil pressure problem that turned out to be bse bearings,pic is before bse install looking for $225 shipped comes with helical gears.

looking to sell or trade this new precision 750 ic core,was going to use it on my build but got a bolt on set up instead looking for $400 obo or trade for jmf 2g race/drag manifold,tubular bolt-on or t3 manifold(good ones not ebay),wheels(5x114.3,17"),or whatever cash on top if need be lmk.

Consists if a galant gs vc w/ -10 fittings and vented stainless can w/ lines. No baffles.Looking for $125 obo plus shipping.

As stated this is a high boost model type-r bov 1bar and higher. It is lightly used $75 shipped in the good ole usa.

SOLD!!!

Recently found #1505's dash plaque and rep key chains looking fir around $200 shipped.

As it states a new precision 750 ic core 2-3/4 in and out Overall Dimensions: 31 1/2" L x10 5/8" H x3 1/2" D. Over $400 online ill do 400 shipped in bonus.

Sold.

As i continue to build the gsx i come across some stuff that i have upgraded or have no more use for so as always im looking to pass the parts to you guys 2g keydiver 880 stage 3 chip-$25 Precision 750 ic core(bnib)-$375 Fp/mitsu turbo install kit-$75 2 3" gm maf's-$35 w/ couplers,$25 w/o...

As it states a mounted but unrun wally 400 pump w/ filter-$125 shipped.

SOLD.

Greddy type-r bov $125 shipped.

As stated mint 93 grille in black no broken tabs,have all clips. $55 shipped.

SOLD!!!! Thanks.

Ok guy's here is the deal, I have recently sold and traded my two gvr4's(1505,224)and I has a bunch of great parts left over that I need to sell to fund my new project(96 eclipse gsx).The prices list DO NOT include fee's or shipping both of which will be worked out upon purchase. I have sold...

Ive decided to leave the vr4 scene for now so everything vr4 needs to go. Prices will not include shipping or paypal fees which are on you. I will give deals on multiple items. Here we go,used dnp bolt on manifold $250 Albert's(from dvdt)custom divided t4 manifold w/ twin 38 connections...

On my 91 vr4 I have a set of te37's(16x7)42 offset I believe and I want to know is there any big brake upgrade for.these.wheels.

SOLD!!!

Hey guys I have decided to go big so up for sale is my new fp3065 turbo it has been mounted but not run and is in perfect condition,it will come with new turbo to mani gasket(the $20 Jnz one) new ptp turbo blanket new restrictor new fp oil feed and return lines New fp oil feed line banjo...

I got link coming so I got some stuff that im looking to part with Palm logger w/ cable-make offer Keydiver stage 3 chip for 650's-make offer Fic 650's-$150 2g Mani and o2-$50 3" stainless d/p for 1g awd-$75 Buschur limited(1 of10 ) 3.5" stainless turboback-$500 for 1g awdIf you have...

Hey Guy's looking for a little insight here.I have a fp3065 Bb Turbo that I have been fighting with to fit my vr4 for a couple of months now,at this point I'm stuck at the water line's has anyone else used this Turbo and what water lines/waterpipe combo was used please help I'm bout sick of it...

Hey guys up for grabs is a pair of pumps,set of springs,and maybe an 8 interior. I have new Bosch 044 inline pump,and a new Wally 255 intank. Both pumps were purchased from Jnz tuning and were mounted but not run as my car is still in the building faze. I will take $125 for the 044,and for $35...

Had a blaha maf and it went bad just need a stock replcement the whole can and maf if you got it

I have recently picked up my second gvr4(#224/2000)and there are a couple of things it is missing,here is my wish list if you here it lmk cash in hand.driver side A pillar-FOUND driver side upper head liner trim-FOUND drivers fuse panel cover passenger kick panel 89 under dash 91 or 92...

Hey guy's I got a few things that I need to move.Prices are listed,but do not include shipping will entertain reasonable offers. If you have any questions post them up as I check here often. Performance: Simpson open face helmet size 7-1/8(57mm)snell 2000(used for a season by my son)-$35...

So yesterday I was wiring up my turbo timer and apon testing it found that it was not working(2g jumper harness instead of 1g) while trying to figure that problem I also noticed that the car didnt turn over(im not ready to run the car but noticed it didnt crank). I traced the problem to the...

Hello guy's so here is the continuing build of #1505. I purchased this car in April of this year(2011)and after finding some metal shaving's in the head during a cam install I decided to just go ahead and start my full build a little earlier than expected.Below is a link to the pictures that I...

I need the rear exhaust hanger,the one that holds the muffler up.Hook,bolts,and hanger(the whole thing)asap!!!!! NEED THIS BAD,cash in hand.

I have a couple of things that I need to rid myself of so here you go.1G 3" awd ss downpipe unknown brand-$75ECMlink boost by gear solenoid w/ push loc and barb fittings new-$3589 under dash brown in color-$25

I was going to use the link boost by gear controller that I bought when I had me gst spyder(which is nib if you want to buy or trade for it),but I'm thinking just a good mbc will be fine lmk what you got.

I just recently purchased a afco scirocco race rad and was wondering what guy's have used for a fan for cooling. I was looking at the flex a lite twin fan w/ shroud flows like 1600cfm so that going to be enough?Here is the basic setup on the car built 6 bolt block and 2g head 9:1.1 fp3065...

Need this stuff to go asap need money to finish my project AMS t3 conversion kit(use mitsu manifold with 5 bolt t3 turbo)-$100 Vibrant stealth twin tip muffler(nib)-$80 Tuners nation civic style rad(nib fill cap sealed)-$100 precision 750 i/c core(used but in great shape)-$200 90 ofh with...

need asap.cash in hand.

Looking to clean out the shed some to fund my project so here you go. AMS t3 tubular manifold for gvr4 w/ waste gate tube(formally garage defeat's)-$350AMS t3 conversion kit (5 bolt o2)-$120Precision 750 i/c core-$250

Hey guy's I have a couple aem widebands left after a group buy that I wanted to offer up. price is $180 shipped,I have 5 left.

I have a new set of fic bluemax 1250's i'm looking to sell so i can get the 1680 high-z's $350 obo.

as it states i need the drivers side head liner trim piece that runs the lenght of the head liner asap cash in hand.

Looking to swap to 5 lug so the te's(and yes they are real) are for sale. These wheels are mint(no curbage,dings,or dents). They are 16x7 4x114.3 in a 42 offset i believe(will check once i pull them this weekend)with 205/50/16 toyo proxes t1-s tires at 80%. I looking to sell($1200obo)or...

Okay so i decided that i want to run e85 now so i'm selling some stuff to fund the fic 1680(or 2150's ) hi-z's that i want so here is my list of parts. 91 grille(chrome paint needs help)but no broken tabs-$35 89 tails(mint)-$75 92 tail center section(small crack on vr4 emblem)-$30 89 under...

looking for the six wire fan plug and resistor need asap.