I was looking everywhere for the info on these OEM strut bolts and trying to find part numbers and even created some search posts looking for them with no luck. SO i found these and they are a perfect fit. Just wanted to share the info.direct linkclickand the ebay listing i bought...

$500 shipped firm, works as it should. caps were replaced also. text me for fastest results 5 zero 8-889-2030

The teins have an aluminum mounting bracket. Where are you guys getting an aluminum bushing to weld on tot he rear shock?

going back to a stock setup. lmk thanks

i want both male and female regular and a/c fans please.

let me know.thanks

I need someone to cut out the floor plan from just under the front seats to send to a seat bracket maker so i can have racing brackets made. I have been trying to make this happen for to long now, this might be my only way unless someone lives in Southern California and is willing to bring...

I have the opportunity to have some racing seat brackets made for our cars, but they need a car to work on for the right fit. Please tell me there is someone local who is willing to help out the community, so we can all have seat brackets that bolt right up!

i had to buy over 100 to get the 8 i needed. they are about 2" long, longer than necessary on purpose because i needed all the help i could get, to line up the metal framing behind the plastic bumper, that the fog light bolts to. $5 shipped for the set of 8 if anyone is interested.

front passenger $50 shipped Front Driver $50 shipped Rear Passenger $50 shipped.these are in used shape and you should expect to repaint them if needed. they are 25 years old. they might clean up well, i don't know. they are still as dirty as they were when they came off the car.

1991 Galant Vr4 Acushnet, Massachusettsi am getting lots of interest, first with the money gets it. text me for the fastest response.Car runs and drives. It starts right up but smokes bad because the turbo is blown and it will not boost. Trans shifts fine.The car has the...

ok so after sorting out the seat brackets i needed, and the seats i wanted, i realized there is going to be a huge issue with seat-belts? How do you get around this without using a 5 point harness? i just want a stock seat belt, i could even do without the auto belts. the seat-belts are...

i have a complete car i want to sell some interior parts from. i have the car sold for its drive train but want to sell some extra parts to recoup some money. it is in the street still so i am not taking off lights, hoods and fenders etc. mainly interior parts that won't have my street...

just came across these in my search for rails to mount some race seats. wondering if anyone has experience with them.click

Just finished up my plug and play JDM fogs with turn signals incorporated. I figured i would share my project. the projector side will continue to be a foglight, while the inner light will now be a turn signal.factory JDM Wire HarnessJdm Projector fog and the inner light to be...

Just finished up my plug and play JDM fogs with turn signals incorporated. I figured i would share my project. the projector side will continue to be a foglight, while the inner light will now be a turn signal.factory JDM Wire HarnessJdm Projector fog and the inner light to be...

clicki want these brackets but to pay $35 for shipping is crazy to me, who else is supplying them?

looking for a set or partial set of trim covers for the JDM Fogs.

i am looking for:a discreet gauge mount for or 3 gauges.Speed Density Setup, 3 bar, LC2 wideband, and a SD cable with a 1g plug for ecmlinkJDM FogsAMG WingHKS, kelford, GSC cams 272 preferablyi have lots to trade if you wanted to. i am located in Massachusetts.thanks

looking for some nice fogs.

i have #970/2000 dash plaque, i am only looking to trade for JDM fog lights.thanks

I built this car many moons ago, sold it in 2012 as a shell and the owner never finished it. I ended up buying it back recently.someone buy this and keep it alive. I will have the shop send some pics in its current state.4 bolt rear (not for $500) 3" exhaust (not for $500)...

looking for the brackets needed to add racing style seats to my vr4. both front seats.thanks

i am trying to fix the engine harness that was hacked. i have a new 1g pigtail but the wire colors do not match the Gvr4 harness. here are some pics. also what is this blue wire for? Thanks green/yellow and black/green green/red, green/yellow and blue/black

also need the CAS clipand all wires on the harness

i wanted to build my own bottom over the winter for minimal investment while focusing on the details that really matter.i have never bought upgraded pistons or rods but have done stock rebuilds. after just looking on parts are fairly cheap.i have spare 6 bolt virgin blocks, i can drop...

i am buying a rebuilt 7 bolt for really good money and was wondering what is needed to swap this motor in a VR4? if i read correctly i need to use a 2g tranny also which is good considering they are stronger right?i mean the motor is $50 he is well known on the forums and is now out of the...

fixing this car at the moment. to be continued....i just bought this car back not running and it looks like it is going to be more work than its worth to me. i owned this car years ago and put lots of love into it then, but time takes a toll. its to cold to work on this car. a leak...

i pulled the VC after doing a compression test. test results were 0-70-0-90 psi I found a set of ARP's installed upside down!!! the allen head side is in the block, so in turn they are all at different heights in the head because they couldn't screw them in properly. so i'm hoping that...

I picked up my old car on facebook classified last night. #1755/2000 title is still in my name lol saves me some money! car is a mess though and not running missing upper mtor mount bolts and drivers axle bolts are not in, tons of wiring that is disconnected. he said it was running...

triplex ceramic BB turbo with additional Billet intake Tip in great shape. less than 3k milesclickWhy choose Triplex Ceramic™ CT3B TechnologyLight weight turbo. Rebuildable. Rapid rotor acceleration. 99% mechanical efficiency. Engineered to outperform competition...

$6000 FIRMthe body is Rust Free with only 1 small ding that can be easily pulled.148kEngine:•2.0 0.40 over Arias pistons, balanced and blueprinted with balance shafts removed and ARP head studs. •Comp Cams 272's •Head rebuild with new valves, seats, guides and Gen 3 lifters...

message me if you are interested in selling your accounts.

just upgraded to 1000cc injectors. these were working fine.$110 shipped (money order) $125 paypal plus fees.text me for pics 508-889-2030

just upgraded t FP2's , these cams are in great shape and pulled great after 5k rpms.$300 shipped (money order) $325 paypal plus fees.text me for pics 508-889-2030

i want to start planning my piping. i have a downward facing turbo and i want to keep my a/c.Looking for pics of other guys setups!thanks

punishment racing o2 with tial 38mm preferred.thanks

anyone have any experience or use one of these? it has the SS mitsu bolt on housing, triplex ceramic bearing system and the billet tip.what do you guys think? should be night and day from the e16g. can't wait for it to come in!Edit: It arrived 11-27-13It is everything the seller...

Gm oil cooler or similar that is slim line that will work well on the vr4 with my 90 OFH.looking to see if anyone has one they want to sell before i buy a new one. looking to have it shipped Monday so i can have it asap.thanks text me 508-889-2030

Ok so i know my cars vac lines have not been optimal since i bought it, boost controller is connected to BOV and boost gauge with a couple "T" fittings, most ports are blocked on the Throttle body, and the catch can setup is pretty much useless. so now that i am going speed density and...

What a bitch! loli used the lisle tool and it was not fun, the last half was easier, but i came close to giving up on the first one!!! I couldn't get it to seat fully, oh boy was it pissing me offi moved on to a different one and got that one on it short time, and just slowly progressed...

ok so i am going to start taking orders on these...here is the sample along side the original.here is the thread where it was discussed. clickI work a lot so i am going to be making these in batches, on the weekends most likely.Final price is going to be $35 shipped...

so i spent a couple hours pulling out what i was told to be FP1 cams to install the cams i picked not long ago that i think are FP2 cams.after pulling them out last night, i can't find any info on them from the numbers?XE250HR 108* uj5180 XE251HR 106* uk 1066-04what i am...

need everything but the IAT.dsmlink cable MAP sensori have tons of stuff to trade alsostuff to trade:act flywheel 6-bolt rc 550's stock 450ccbought the cable from ecm link $45

i want to make some room in my toolbox. You guys have first fibs before they go on craigslist.i figure half price of retail is a great deal on any of the tools i have pictured. just let me know what you are interested in and i will get the part # for price reference.Snap On sockets...

i have been kicking around the idea of making some sort of muffler that i can bolt on to my existing 5" muffler tip temporarily as an extra muffler. the car is annoyingly loud when just idling and working on it in the garage/driveway, and we just moved into a new house/neighborhood. i am not...

update: these were sent to PTE, and i still have not had them properly cleaned again yet... 9-29-13so i sent my new to me used 1000cc injectors into a reputable vendor(will remain nameless for now) to be cleaned and tested, new o-rings caps etc. whatever they needed. ok so i pay the...

stock hy35 from cummins. $200-$300 gsp manifold with external wastegate blocked off for now to retain the stock wastegate $170 holset DIY flange with a custom outlet made up at the local muffler shop. $30 for flange either -12 or -14 drain line oil restrictor for my OFH feed line.other...

if anyone is selling these let me know. still not sure if i should just get the springs or to go with retainers also??? maybe a good used set will make up my mind for me!

whats the deal with my name in the bad seller section and who are these newbs posting about me? where are these people i scammed and who are they... its kinda of getting to me now, i love the org and have been an on and off member for years!!! i don't need to or want to scam any member. how...