The Top Mitsubishi Galant VR-4 Resource

Join the best E39A 1991-1992 Mitsubishi Galant VR-4 community and document your GVR4 journey.

  • Software Upgraded - Reset Your Password to Login
    In order to log in after the forum software change, you need to reset your password. If you don't have access to the email address you used to register your GVR4.org account, you won't be able to reset your password. In that case, follow the instructions here to regain access to the forum.

Search results for query: *

  • Users: littleb
  • Content: Threads
  • Order by date
  1. Consensus on spring on spring rates?

    I tried searching to see what people think and haven't come up with too much. I've mostly seen 8k/6k and 7k/7k. I have an opportunity to get some buddyclub rsd's for an evo for a very good price but they have 5k/4.5k swifts on them. So if I get them I'm going to be swapping out the springs but...
  2. Trying to squeeze an S362 in

    So as the title says, I'm trying to make an s362 fit. I'm having trouble even getting it to fit on to the engine itself. I have a JMFab top mount manifold and the turbo is hitting the head. I already ground down the parting like on the turbine housing and it's still hitting. So my plan was to...
  3. WTB: Green Top CAS

    Looking for a green top cam angle sensor. Shipped to 44116Thanks
  4. WTB: Intake manfold and TB

    Let me know what you want for an intake manifold and/or throttle body shipped to 44116. Looking for stock or aftermarket.
  5. WTB: MP-4303, ECMLink v3, JMFab T4 twin scroll manifold

    I'd settle for an eprom ecu for the right price. Let me know if you have anything
  6. Fuel set-up for ~600whp

    As the title states, I'm looking for a fuel set-up for a ~600whp car. I currently have -8an feed and return lines, FIC 1100's, and an Aeromotive 340. I'm thinking that the injectors and pump might fall a little short. Anyone have any recommendations as to what I should do?
  7. WTB: A lot of stuff

    ETS intercooler piping. Already have the intercooler, just looking for the piping.Magnus V3 cast manifoldAftermarket engine management. Not really looking for anything specific. AEM/Haltech/ECM Link v3Wideband o217x9 +35 wheelsScattersheildHarness barIf you're in the...
  8. Looking for list of hardware for engine and trans

    Is there a comprehensive list anywhere of hardware for the engine/trans/mounting hardware?
  9. ***SOLD***FS: 1991 GVR4 1353/2000 Nile Black Cleveland, OH $1500

    Mod List:ENGINE: - .20 over 4G63 (wiseco pistons, top seal rings and stock rods, Crank machined and balanced by Metals Crankshafts and Grinding in Cleveland)20k ON THE REBUILD - Balance shafts removed - Full rebuild stock head and cams - Newer lifters - 2G Mas Sensor - Full 3"...
  10. WTB: Pretty much entire front of motor

    I basically have a long block and need everything else that goes on the motor. The more that one person has the better it is for me.
  11. 17x9 +24 Wheels

    I have a friend who is offering me an awesome deal on some 17x9 +24 fr500 wheels. Now I know that's not the optimal size, but would they be able to fit under the car without having to do anything too extreme?
  12. WTB: Twin disc clutch, 17" 5x114.3 wheels, 22 Spline transfer case

    Looking for a Twin disc clutch (doesn't have to be new), 17" 5x114.3 wheels (don't really have too much of a preference, although the wider the better and I do have a thing for mesh wheels), and a 22 spline transfer case. I'm in NE Ohio so if you're close to me, that's a plus so I don't have to...
  13. WTB: 1200cc injectors, clutch, flywheel

    Looking for injectors around the 1000-1200cc range, preferably a twin disc clutch setup (will be making around 6-700hp), and a flywheel.
  14. WTB: Adjustable Cam Gears

    Looking for a set of adjustable cam gears. Can be new or used but I'm a broke college kid so of course I'd prefer a decent set of used ones
  15. WTB: Rust free shell

    Looking for a rust free galant shell or full running vehicle in the NE Ohio area. I have a pretty crap schedule due to school so if you can't work around that let's not waste our time. I'd also be willing to ship if the price of the car is right.
  16. WTB: Valve Springs, Bearings, Valve guides ect...

    Going through the process of rebuilding an engine. Looking for some type of dual or beehive valve springs, main and rod bearings, bronze valve guides, valves (preferably 1mm over), gaskets, pretty much just looking for new parts that someone hasn't been able to use or changed the route they're...
  17. WTB: Roller

    Looking for a roller with no rust. Would like it to be in the Ohio area but if its the right price I can come pick it up from further or possibly get it shipped.
  18. Intercooler Fabbing

    I'm not really sure where this should go so sorry if this isn't the right spot.But anyway, I was thinking about buying an intercooler core, some end tanks, and some piping and making my own intercooler kit. I know I probably won't save much money by doing this but I figured it doesn't seem...
  19. WTB: 6 bolt crank

    Looking for a stock, uncut 6 bolt crank preferably in the Cleveland area.
  20. Long Rod Motor

    I'm thinking about building a long rod motor but I can't seem to find anywhere that sells 156mm 6 bolt rods. Does anyone have any idea of who may make them? And if not, is there any company that would do a special order for some?
  21. WTB: Transmission

    Looking for a trans. Preferably early 91 and near Cleveland
  22. JE vs Arias

    I'm in the process of building a motor and I can get really good deals on both JE and Arias pistons. I'm thinking about building a long rod motor and I was wondering which would one out of the two you would recommend
  23. Crower valve springs

    I got a set of new Crower valve springs and retainers for $40. I can't seem to find any specs on these though. Can anyone help me out?
  24. Wastegate Flange

    I've got a buddy who is fabbing a manifold up and is looking for a flange for a Tial 44mm. Can anyone point me in the right direction for this?
  25. Megasquirt EMS

    First things first. I'm asking this because a friend of mine is completely too scared to try it on his own and asked if I could help. I told him I would try my best so I decided I would start here.He wants to run a standalone EMS in his GVR-4 in the near future. He doesnt have money for AEM...
  26. EGT question

    This is probably a stupid question but I tried to use the search and couldnt find anything. What should the EGT be at crusing speed (60-70mph)?
  27. Engine RPM's

    Im having problems with my car and i hooked it up to the logger today and it wasnt reading any RPM's. How would you check the cam angle sensor?
  28. coilover question

    Are Ksport the only coilovers for our cars that come with the camber plates? I tried to find them for the D2's but couldnt find anything. And has anyone had experience with the D2s?
  29. Logger

    So i hooked my logger to my car this weekend and started to use it but then every 5-6 seconds it would disconnect and then reconnect and work and so on. Anyone know why it would be doing this?
  30. RotorPros

    Has anyone ever used these rotors? Ive heard of these from a couple of my friend with evo's and they said they liked them but does anyone here have any experience with them? You can special order them from MAPerformance apparently.
Support Vendors who Support the GVR-4 Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications RixRacing RockAuto RTM Racing STM Tuned
Top