while some of you may have had decent dealings with him in the past I have found out that when everything doesnt go exactly his way, he is more than happy to screw someone over.Kelby posted up a WTB ad for some 92 taillights and I have a set that Im not particularly attached to. for the car...

Well I need some cash very quickly so I need to sell my fmic setup. its the absolute best/shortest possible route you can run on our cars. it started with a race short route 2g core. ( I think its 12x3.5x26 but will get more exact measurements) then modified it to fit perfectly in the gvr4. it...

I have 2 cats that I was about to take in for scrap, but figured someone might need em. they are in perfectly good working order.I have a stock mitsu cat, and a "buschar racing" catco 3" with very low miles. Im looking for about $100 shipped each. throw me an offer, if no one needs...

well I picked up number 181 as an alternative to running my jeep everywhere. I figured the gas savings alone would be beneficial. well like 4 days later it jumped time. well thats when the money pit started. once the head was pulled the valves were all smashed, and the pistons were nicked up. so...

well this is my first full rebuild that I have done by myself on my own mitsu.I tore the motor down to the block and rotating assembly. cleaned the block deck, the oil pump surface, and the oil pan surface. I put in the BSE with new bearings. made sure the head was nice and clean then put it...

I have a few things that I need to make my build a little more complete. Im going to list them in order of importance. Im really hoping for trade, as my budget is beyond negative. just wanted to list everything that I would except in trade.rings for 2g pistons 6bolt bearings (main+rod) arp...

I have a few things that I need to gather some cash for.I have 2 Hyundai valve covers. one is shaved the other is still original. $75 shipped for the shaved. $65 shipped if you like it natural.both are in working orderI have a mitsubishi galant valve cover. It is also original...

so I got screwed on my recent buy, and am trying to get it back on the road. I have $0 of my budget left.I was prepping the motor last night to go back together. I have everything I need to make the car run right now. however in the middle of me checking the deck my buddy makes a comment on...

so im working on my intercooler, and a buddy of mine brought up the logical issue of having the inlet and outlet on the same half of the intercooler. not the same side, like a double pass intercooler, but like having them both on the top. the argument is that air will take the shortest route...

im as giddy as a teenage girl on her way to a guys basement photo studio. He seems legit, and said he can make me a famous bikini model.I just picked up 181/1000 my 3rd vr4. Im so excited to be driving a vr4 again. but I also have that 'its too good to be true' feeling. she pulls pretty good...

Im looking at picking up a 2nd gen mirage. they have a lower power, lower displacement, and more finicky g32b. so I need to run a smaller turbo than I normally would. the g32b is a 1.6l and has a lower ~6k rpm redline. so im looking at turbos between a 14b-16g. If I run a 14b will there be any...

this is the number one modification that I have ever done to any car. if you are used to driving average, or even questionably legal cars, this is a smack in the face. I had absolutely no idea what I was missing. if you think your stock/worn suspension is great cause you are either used to it...

well I think I have to get rid of 1630. for those of you that dont know, or have forgotten. I picked it up from 'joec' a few years ago. the car had a few gremlins that quickly introduced me to roadside maintenance. for a while I a had blast with the car. it helped me to really learn how to...

I have a complete KYB AGX/eibach combo. these are the more rare vr4 specific springs, not the more common 1g. they have very low miles and worked great. new upper mounts as well....searching for pic..full 3" down pipe. no 2.5" bottle neck. I have the matching 3" flange as well. it Y's to a...

trying to raise money to get to the shoot out. I can get pics, but its in fine condition, I pulled it for a sale that fell through.$50 plus shipping.

I am just looking at cleaning up some stuff. It has some sort of coating on it, but Im not sure what it is. It doesnt have any cracks or anything.100 obo. this would be nice on a GSX. *SOLD* Its a little dirty, and used, but completely functional.

$35 shipped. 100% perfect, Im just poor.extremely fun game. a surprisingly good story line for a puzzle game. Im not a huge gamer myself, but I really liked it. Def a game for ANYONE. it even went over well with mom who hasnt played games since mario came off of the NES.good mix of...

I have a block for pickup in san Diego CA. I shipped this block to CA on my dime and never got paid for it. It needs picked up immediately as there is a daily charge for storage. my previous deal was 130. but im open to ANY offer let me know right away.

I have to get rid of some parts to keep my build going...everything is in perfect condition and I can work out shipping.aw4 shifts great, runs perfectly242 Tcase (the one with 2hi/part time/full time/N/4low) never been wheeled. only 4100 miles total, all of which in 2wd.D30/D35 from 99...

I have to get rid of this to get some cash for my DD that blew up.full 3" exhaust... now this is the best possible exhaust to have for a daily, or street driven vr4. It runs a full 3" flange to a mandrel bent 90 through a 3" flex pipe. no 2.5 to 3 bottle neck like most have...then after the...

I have to get my DD finished and am running out of funds. make me an offer, I can get pics of anything.fidanza lightweight flywheel, with only 500 miles 115 shipped22 spline aluminum transfer case 115 shipped obo11b turbo holds boost great, with 02. 115 shipped oboturbo block...

just sold the rest of the front clip today, so i figured Id start a new thread for whats left.all items are from a 85 p-type maroonrear spoiler front fenders flares gas tank 4.10 lsd rear tail lights electric motors doors, windows, wipers, sunroof, head light head light assemblies "KKK"...

a working tested capped and socketed EPROM that is tested and works, but apparently is slightly different than a stock vr4 one, may be GSX, or Mirage, or rare, IDK but it worked fine 175 shippedthe 1991 eprom ecu that was capped and socketed by 1630s previous owner ran car fine before, but...

I have a sale that fell through and need to sell these off real quickblock bored .20 it needs redecked, machinist decked it like a v8 (its straight, just not smooth) .20 over oe pistons (rockauto) with rings 1g rodsall for 275 OBO sale pending SOLD I can also get a good deal on...

Transmission sold,tcase still availablepulled out of #1630. everything shifted fine when I had it, I replaced the seals and fork/pinion then drove the car about 1000 miles. It has been sitting for a while (bout 2 years) but would be fine to get a car back on the road, as a spare, or for a...

didnt know if you guys have any interest, but it never hurts to ask.ive got a complete mk2 supra im parting out for some cash.let me know if you need anything.

we got a pretty sweet alpine stereo setup. Its a double din with a complete equalizer, and old school digital displays, includes amp and 6 cd changer and a tape deck. this was top of the line back in the day with no expense spared. everything works perfectly and is still in the car if ud like to...

Im in need of some cash and these are about to go to the scrapper for $. So before it comes to that. I have a vr4 and 1g, and I believe I still have my mirage turbo radiator as well (have to check its cold and dark) $40 each plus shipping. and they include all the stock fans. get in contact...

So does anyone know the details on what is track approved?I know you have to have a cut off switch that can disable the car. Is there any rule saying it has to be in the back of the car? If I mount it up front, then I dont have to run the alt wire all the way to the trunk.

Well I seem to be having a helluva time with rust on the vr4 I just picked up. In addition to the fuel pump assembly, the oil pan sprung a leak on the way home yesterday. havent gotten all the way into it yet, but im pretty sure its probably rust, because I never hit anything, it just starting...

When does the stock fuel pump top out? I have a 255 hp, but my sending unit is rusted really badly and I know im going to break it pulling it out. and I havent gotten a chance to hook up my wide band to see if id lean. So im currently stuck with the stock pump, not rewired and am wondering...

does anyone have any experience with running these on the vr4? I like the Idea of saving weight, and it would also save me from having to also buy a solid front mount.

I have always done a cutout on my mitsubishis. Its ridiculously loud and adds some power as well. On 1630 I did a full 3" turbo back, with an expanded stock cat and muffler, than ran a cutout right before the cat for a straight through setup.the biggest problem with this was ground clearance...

so I have really been looking into doing custom carbon fiber parts. And I know how this forum fares with carbon fiber and group buys. but hear me out. Im simply gauging interest and right now there are no promises what so ever, just seeing where people stand.how many people would be truly...

i need the measurements of a 1g flange, I can get one made, but need the exact measurements. i need this asap so i can get my intercooler done

I dont know if its just me, but I feel like the price of real MHI turbos have dropped pretty dramatically recently. I feel like when I started looking for a turbo a year ago prices were much higher. So im looking to get rid of the jdm 16g that I have. its off a galant evo. and upgrade to...

Hey guys I havent had a chance to work on my car in a really long time, so I kinda fell out of the loop. im gonna post a similiar ad in the wtb section, but i figured id start here for help. I am gonna be making my own exhaust and intercooler setup and all I have is straight tubing,all sizes...

Can the 1g harness be used in the vr4? like from the ecu to motor, and the fuse box/headlights and such. pretty much all the wires in front of the firewall

where is the vin located? as in every location not just one.

Anything you guys can think of that could be powder coated? I gave a bunch of parts to a local powder coater, and returned I can get anything and everything i want powder coated for free. the only restriction is he has a relatively small over, I think ony big enough for a 16 inch rim. so...

So there is an obvious advantage of working on air flow on a motor. this explains the indepth work on exhaust manifolds. tubular, equal length, and even divided housings. Now why havent we applied this to the intake? I know that the longer the more bottom in, shorter the more top end. but what...

Is there a code on the engine block or transmission that would tell you if it is the original motor/trans? i know alot of cars do, but would anyone be able to tell if it was just another 4g63 from another dsm, or another galant for that matter? Im just looking into swappin into a new motor but I...

I know this is more of a question for the CSM guys. But I always start here. I got a 89 colt that im using 1630 as a parts car to make it beefier. Im looking to swap over the hubs and brakes along with suspension to the colt. I imagine I would have to use axles and what nots from the rear of a...

Well if you dont know, 1630 caught on fire a few months back, and left me carless, jobless, and BROKE. I was about 6" from givin up hope and trashing it, but i kept it in the yard, and things are starting to turn around. My father has given me a garage to do all my work on, and keep the car out...

I need to know if there is a oil filter that will fit on our cars, but is shorter. I have o2 clearance issues, and need it fixed immediatly. it already busted a whole in one

is it safe to run 550s on a stock fuel system? id still be running stock boost. im having keydiver make me a chip to take car of the injectors, I just wasnt sure if they would run fine on stock fpr and pump.second question, I have a new pump, ( currently MIA), can I install it one my stock fpr...

I didnt think that it would come to this but I really dont know what else to do.91gsxz3 was in the need for a suspension peice, that I just happened to have laying around because I just did a full swap. I told him that I would sell him the 2 upper supports for $10($5 a peice) plus shipping. He...

I know that the power antennas are very bad for goin dead. mine died awhile back and was replaced by previous owner, it has a radioshack diy job going on that is just disturbing. im not really liking the stock power antenna, i would have to rewire my head unit. so i was thinkin of doing...

just got my check in, now the galant gets to have a treatment. This is kinda a WTB thread, but is also a what to buy, so I thought it should go here instead WTBcurrent mods ACT street disk ACt2600 pp fidanza wheel Iridium plugs NGK wires 3" intake 1g mas K&N 16g turbo 3" o2 and DP palm with...

I have a palm m125, mmcd, both cables to connect to the car. I plugged the cable into the port by the fuse box/ driverside kick panel. I get no readings from the mmcd, when a run the test option, I get a serial communication error. I have tried multiple ways of initiating the program all ending...