Don't need to sell, but I would rather see someone else enjoy it.Will update this post as questions come in and I remember what I forgot, but here is a start.1991 Galant Vr4 Nile Black Sunroof 155,131 milesENGINEFP2 cams PTE 5031 dual BB turbo TB with half shaft mod adjustable cam gears...

I am putting my timing belt on and have gone through all the proper steps. All the marks are aligned properly and I have the right gap on the hydraulic tensioner after rotating the engine and letting it sit for 15min.HOWEVER, after all was said and done...while measuring the gap I...

All parts are used, but worked great when removed from car; low miles. Shipping is built into the prices; add PayPal fees or send as friend. I will respond to PMs as fast as possible.Sorry for the poor pictures. I finally upgraded my phone and didn't realize what live photo was doing haha...

I live in Ocean County, NJ 08731-Body stuff needs paint (clear coat pealing and paint faded) -trunk lid appears to only have "dents" where the wing attached to trunk; most likely from somebody yanking on wing.-windshield looked perfect BUT will thoroughly check before picking up...

Hey guys,Long story short: 1. Lost my oil. 2. Spun the rod and main bearings (one of the rod bearings literally SPUN). 3. Crank is shot. It was already turned down so it is not fixable. 4. Not sure if rod journals are damaged.Now, what should I do?==Buy another crank and new...

Not sure where these came from. They don't appear to be OEM, so could someone comment on this please? They are identical to OEM though.Brand New In Box. I never installed these; simply took them out of the package. -all rubber seals are perfect -bulbs are perfect -tabs are perfect...

I couldn't find a price for these new anywhere (did Aeroworks go out of business?). I think they used to be ~$150 plus shipping new? I'm asking $125 since they don't make these anymore.-Needs a good cleaning. -Comes with mesh back -Has a few small defects in the glass coating as shown in...

Hey guys. Has anyone disconnected the rear steering AND LEFT IT IN PLACE? Did you just cap off/plug the lines and everything was ok?If it wasn't connected to the rear diff I would just remove the whole thing.Thanks, Ed

1. NGK AFX Wideband: $207 shipped to the 48. -Comes with everything except the exhaust weld bung which should be ~$5.2. Aluminum Spark Plug Cover: $60 shipped to the 48.STUFF I HAVE THAT WILL BE FOR SALE SOON: A. Baer Big Brake Kit OR 3000GT brake kit; not sure as to which I will be...

These are used and one was recently rebuilt by HotBits.They are extremely dirty and if they were cleaned up they would look ten times better; I just didn't have the time to clean them. I probably will when I post the back two.Spring Rates: Front: 200-80 Rear: 200-50$OLD SOLD SOLD...

SOLD SOLD SOLD!!Front and Rear Evo VIII(8) seats:-Great condition. No rips, tears, holes, burns. Small wear on driver side from getting in and out, BUT it is not torn. Rear bottom cushion shows a small looking stain in the middle. I think it will come out and can try to get it out...

I'm trying to decide what intake manifold to go with. I currently have a JMF race intake mani and was considering switching to Magnus.My soon-to-be setup: -FP Green (~25 psi) -Built engine (8.5:1 , BC272 cams, 1mm over valves) -Evo front mount w/ 2.5 inch pipingI'm looking for pretty good...

Hey GVR4.org,I have a knock problem and was hoping someone here could help.MODS: -EVO 3 16G (18psi) -EVO intercooler with 2.5" piping -BC 272 cams -EVO/3g maf -FIC 950cc injectors -Base pressure: 44psi -Global fuel: -56.6% -Deadtime: 360usecs -Walbro 255 -ECMlinkAfter installing...

Unorthodox Racing Crank Pulley -Rev C -Anodized Blue-$110 shippedIf interested please PM me with "Pulley" as the subject.

Stock Engine Harness $300 plus shipping -ecu plugs untouched/unhacked! -Only one tampered area shown in pictures below but can easily be fixed. -needs a little cleaning -High resolution pictures upon requestI posted this as a feeler because I really don't want to sell due to its great...

have a set of 560cc injectors from an EVO. I recently upgraded and no longer need these. Nice injector size for a mild setup.SOLD

I have everything needed to convert back to AC. Will ONLY sell as a set but i have other lines etc from another car. I also have the condenser if that's needed too.Asking $200 picked up.I have high res pictures that can be emailed.

Fuel sending unit with stock pump. $150 plus shipping -NO hacked wires -NO broken lines -Surface rust can be easily cleaned

-Two good front dog legs. Very good condition. Picture shows grass cause I was lazy and didn't clean them up.-$30 each + shipping + paypal since they're in AWESOME condition.-I also have both side skirts in great condition but there not off yet. If interested let me know.More...

-I need to upgrade my injectors (maxing out 560s) and I was wondering what you guys recommend?-The choices: 1. Precission 880cc Ball-Style. $269 2. FIC 850cc Ball-Style. $269-Looking for some real evidence and facts for your reasoning. I know a bunch of people use each and have no...

Front bumper cover. $125 picked up in 08731 -Good condition -hacked front but pretty clean.-can get more pictures if needed.

Hey guys,When I'm driving in any gear and shifting back to neutral, my throttle races at around 4000 rpm's. It does not drop off to a normal idle until I am driving 15mph or under.If I remember correctly it came out of nowhere. I figit with my car here and there all the time, but I don't...

Hey guys. Please help as my VR4 is my daily driver right now!!-When I push in the clutch pedal i start to hear a grinding noise (coming from the bell housing it sounds like) and it gets louder the more i push the pedal in and the engine bogs until it stalls.-I'm thinking my throwout bearing...

Does anyone know the fonts on the dash badge?i think the engraved number is times new roman??? but i cannot seem to find the "GALANT VR-4" and "Limited Edition" font...I think they are the same but not positive. No font even seems to be close to the A on it.Figure someone here in graphic...

great doing business with. sold an armrest too and he was quick with PMs and payed quickly.also covered paypal fees that i didn't ask forgreat guy!!

great buyer!! replies to PMs promptly and pays quickly.-thanks for being understanding with some of my delays.pleasure doing business with!!

great guy to do business with. sold him trunk tensioners so his bi's dont get any bigger ..fast replys and great responses!! none of those three word replys some people give.thanks for an enjoyable sale and welcome to the board!!ed

hey guys. i hapened to be on dsmtuners lol...looking for people that want to buy things and i saw this while i was on there. a machinest on there does this to his customers 4g63's along with the 3g lifters and there is no more tick. he's dont it to over 10 engines i think and no complaints...

hey guys. months ago i noticed a REALLY REALLY bad leak coming in my car. i took the door panel off and saw that my plastic bag was rotted. after spraying the car down with water i saw that this was the reason water was coming in.put new plastic on it just to stop it for the time being. today...

i personally think this thing is hideous but i figured some people are into this so why not let them know that there is a company on ebay from California that makes these. i really hope nobody actually gets these things lol but to each is own right?would anybody get this? hopefully...

price is SOLD!!!!!!-138k miles, runs great -5 speed manual trans, shifts like butter -4G63 motor -AWD handles GREAT in snow -new tires -new altinator -just passed NJ inspection -power everything -power sunroof -very cleanPM me if interested. PM's will be easier to deal with...

price is $1,900 FIRM-138k miles, runs great -5 speed manual trans, shifts like butter -4G63 motor -AWD great for the snow -new tires -new altinator -just passed NJ inspection -power everything -power sunroof -very cleanPM me if interested. PM's will be easier to deal with...