The Top Mitsubishi Galant VR-4 Resource

Join the best E39A 1991-1992 Mitsubishi Galant VR-4 community and document your GVR4 journey.

  • Software Upgraded - Reset Your Password to Login
    In order to log in after the forum software change, you need to reset your password. If you don't have access to the email address you used to register your GVR4.org account, you won't be able to reset your password. In that case, follow the instructions here to regain access to the forum.

Search results for query: *

  • Users: gvr4ever
  • Content: Threads
  • Order by date
  1. gvr4ever

    MAF cleaner. 3rd gen V6/ EVO

    Before I stored my car for the winter, I filled it up with gas and wanted to give her one last send, and she fell on her face under boost. Revved fine, ran fine, just started burbling under boost, lost power. I spent about three weeks or so doing research on weather or not CRC MAF cleaner was...
  2. gvr4ever

    2G fuel injector clip pigtails

    Having trouble finding these online. Anyone know of a source? My car was falling on its face over 10psi the last time I drove it. Did a boost leak test and one of the injector to intake manifold seals was missing. I wanted to update the injector plug at the same time I install new injector seals.
  3. gvr4ever

    Spare tire question.

    I want to build a subwoofer box where the spare tire goes, but I haven't had the spare tire in forever. Where does the cardboard cover center plastic piece fit into?Can anyone post a picture of the stock setup?
  4. gvr4ever

    RPM resonance. Front hood, dash?

    My car is close to damn near sorted. I have a 2200 RPM resonance that I just can't find.Anyone else have this problem? I suspect it could be the newer exhaust, but near the same time, a lightweight ACT flywheel was installed and a Greddy 6 puck clutch.A worn rear hood mount that had play...
  5. gvr4ever

    Direct fit LED lights for low beam.

    I'm behind the times for LED lights. Anyone retrofit modern LED lights? Mainly for low beam. Any good retrofit with the needed resistance built in for a plug and play? I've experienced a few traffic cut offs and close calls lately driving a smaller classic car. I'd like to just drive with the...
  6. gvr4ever

    WTB Galant GXS power steering reservoir.

    Currently have my RWS lines blocked off, but would rather have a reservoir that was compatible with the PS float sensor without the extra lines.
  7. gvr4ever

    Drivable Galant VR4s

    I know we have a registry, but I've always wondered how many are actually drivable.I know it's impossible to get an accurate count, but please report if you have a Galant that is ready to drive, or built for race only, but still drivable.347/1000 is currently a modded street car only and...
  8. gvr4ever

    Cool fall weather.

    Who's up and running and enjoying the benefits of a cooler intake charge and intercooler effects? I feel like it's a genuine 40+ HP and torque gain. I love this time of year.I found a county road loop near my house I have been wanting to drive for years, but the road was rough. It was recently...
  9. gvr4ever

    AWS delete

    The how to thread has a lot of broken pictures/links.Could someone please post a picture of what you did to the resevoir. Where do the low pressure lines go for the AWS?
  10. gvr4ever

    3K GT SL front brakes

    Everyone seems to be out of Galant VR4 /1G AWD Turbo front brakes. I just wanted to confirm that the 3K GT SL front brakes are a direct fit to the stock brackets and fit under the stock wheels.
  11. gvr4ever

    Power steering switch connector.

    Could someone please attach a picture of the connector that connects to the power steering switch?About the only thing not sorted on my car is the PS switch is not blipping up the RPMs when parking.
  12. gvr4ever

    What is that smell?

    What is that vintage smell? Seriously, is it just me, or do our cars smell better than a vintage German car?The leather, plastics are creating a wonderful sweet vintage smell. I don't know the cause, but I love it. Anyone else enjoy the smell of a aged Galant VR4?
  13. gvr4ever

    Going to keep.

    One of the reasons I was willing to let go was because I didn't have a 3rd bay. I found a cheap place to store for the winter, so I'm going to keep it for now.The car is currently more sorted than it's ever been, drives great. Booted the new Kia outside.Galant VR4347/10002nd owner since...
  14. gvr4ever

    WTB old digital tuning palm data log cable.

    I''ve lost mine. Also the data log to palm cable as well. I can get that off of eBay, but I couldn't find the data log cable.I think it needs to be the actual old cable from digital tuning. It has a red power cable coming off the ODB1 port that plugs into the fuse box.Fixed the wrong brand...
  15. gvr4ever

    Palm solutions

    Does anyone still log? I was attempting to install the palm desktop on Wine in Ubuntu, but it failed in XP compatibility. The install seems to want a real Win 98, XP, 2000.What are you guys using?
  16. gvr4ever

    FS: Elac B6 bookshelf speakers. (Sold)

    In like new / excellent condition. They are very lightly used and never pushed or driven hard.$220.Catch is, pick up only. I didn't keep the original boxes and packing material. I have too many speakers and got carried away. These are extra and I just need to downsize.
  17. gvr4ever

    WTB: ECU

    Looking for a 6bolt manual ECU that can be socketed. Known to be good too.Thanks
  18. gvr4ever

    Steering rack upgrades.

    Are any steering rack upgrades a little faster than stock? 1G, 2G? Direct fit?
  19. gvr4ever

    FS: 2000 Celica GTS wheels with studded snow tires.

    205-50-16 Firestone winterforce studded snow tires on stock wheels.Barely used. Less than 1K miles. no longer have the car.$450Pickup from central IN.
  20. gvr4ever

    TPS

    Anyone use a non Mitsu part?Anyone know a source that supplies Mitsubishi?I was looking at this one.click
  21. gvr4ever

    FS: Stock suspention.

    I'm going to have stock springs and KYB-GR2 in a few weeks. Struts/shocks probably have 40-45k miles.Please let me know if anyone has interest in them.
  22. gvr4ever

    WTB: Left rear hood hinge.

    I want one without slack or play. Left (US driver side).I went to order a new one, and they accepted my order, but they are NLA now.MB401249
  23. gvr4ever

    Clutch pedal assembaly.

    Are new parts still available?Getting my car back up to par. Getting close, but the clutch grab is low. I think a ACT 2600 did the wear and tear. Currently running a centerforce. A lot lighter, but I still don't have enough play.
  24. gvr4ever

    White wheels on a Black Galant

    If you have them, please show them.Thanks
  25. gvr4ever

    FS: Used Mofugas 2.5" turboback exhaust (gone) / 91 black wagon wheels

    $250 obo, prefer pickup, don't think it would be worth to ship.Down pipe flex section needs replaced. May need something else I'm not aware of. I know the flex section was leaking. Has a high flow cat, and if I can find it, a off road pipe too.I also have a set of 91...
  26. gvr4ever

    Strut Tower braces

    Anyone running these?clickGeneric UR stuff?They are made of steel.
  27. gvr4ever

    CM exhaust sound.

    Does anyone happen to have a sound clip of the CMs 2.5" with high flow cat and dual tip muffler?Thanks
  28. gvr4ever

    Image upload problem?

    I can't unload files today. No errors. It's just getting stuck on processing. File was a jpeg 1.25MB
  29. gvr4ever

    Brake rebuild.

    Has anyone ever rebuilt the brake calipers themselves? If so, how hard was it?Where did you source the parts?
  30. gvr4ever

    Exhaust size.

    My Mofugas exhaust has crapped out. Currently running 2.5". Any reason to go to 3"?At the moment, I can only run 22psi max and don't currently have plans to make changes to my setup.Turbo is big 16g with FMIC.
  31. gvr4ever

    Brake question.

    Is the 3000GT non turbo front brakes a direct fit? Do they fit under the stock wheels? Are they worth the change?It's my understanding that they have larger pistons. True?
  32. gvr4ever

    New temp gauge

    I tried google, but found too many 2G DSM links.I got a bit of a scare this morning. Drove the GVR4 to work and I looked down and the temp gauge was 100% hot. I wigged out and pulled over and turned the engine off. Popped the hood to make sure the brand new water pump belt on the brand new...
  33. gvr4ever

    CM exhaust

    If anyone has one with a high flow cat, could you please upload a sound clip? 2.5" with dual tip, if anyone happens to have that.I mainly want to know if they have any drone at HWY speeds.
  34. gvr4ever

    Odd sound.

    I have a strange resonating sound near the top left side of the engine bay that only happens exactly at 2300 RPMs. I can't find anything loose, it goes away as quickly as it starts, unless I actually stay at 2300 RPMS. It's kind of loud and annoying.I might try and get a video of it later if...
  35. gvr4ever

    Indiana GVR4 owners.

    So, who's left in Indiana?
  36. gvr4ever

    Oil filters

    Local stores seem to not have any more oil filters for the 4G63 anymore. What are you guys using?Been getting Wix from rock auto. They have Mann, BOSCH, Denso and a few others.
  37. gvr4ever

    Injector / fuel rail question.

    Would the injector to intake seals be the same for stock and FIC injectors? Also, what is the part number for the black fuel rail spacers?
  38. gvr4ever

    e-brake cable change.

    Who's changed them out? How bad is it?Anything besides T-case, exhaust, drive shaft, and heat shield?
  39. gvr4ever

    Direct fit injector upgrades.

    What aftermarket injectors are a direct fit?Who are the well priced well rated retailers now days?
  40. gvr4ever

    Spark timing.

    347/1000 is still ill. It is at a shop right now. So far the diagnosis is, compression is good, leak down test is good, everything is timed right. CYL 1 is not contributing. The mechanic says spark sounds different on CYL 1. Car has all new plugs, wires, coil pack, resistor pack.I had the...
  41. gvr4ever

    Could this be causing all my woes?

    Looks like the exhaust cam mark is raised ever slightly. Is that even a whole tooth off?I know, its a little fuzzy, but it's hard to get a pic that close with a phone.
  42. gvr4ever

    Anyone mechanics in Indiana left?

    I have been unable to fix my car on my own, but at the same time, I have been unable to find a quality mechanic with proven experience to work on it. Fathouse Productions no longer works on them. Is their anyone left?Not getting anything but tire kickers or scammers on my car. I can afford to...
  43. gvr4ever

    CAS confusion.

    I spent some time tonight rotating my CAS 180 just to make sure. I changed a spare one out, took the head out, and just wanted to make sure.Anyway, my car seems to run the exact same way, no matter what way it is. This goes against everything I've read.My car seems to run fine standing...
  44. gvr4ever

    Can we have a new rule?

    NSFW post should be labeled as such. To me, this seems like an obvious thing to do. I remember about a month ago I opened up a post not noticing who post it AT WORK. I was able to close to before anyone else saw it, but still... I feel like people are trying to sneak porn post on this forum. The...
  45. gvr4ever

    Need help.

    I need some help with my car if anyone can volunteer in person who is near central Indiana.My car runs rough, hesitates, can't get it running right.This problem has been going on for two years plus now and I just can't figure it out.A quick backgroundCar has rebuilt head w/good...
  46. gvr4ever

    Poor running car.

    I've had this problem for awhile now and I can't solve it. Runs like junk cold. Rich, hesitating, rough, etc.Car has good compression (rebuilt head) cleaned and matched injectors and a injector noid light had confirmed the injectors are getting power. Car has tested another CAS, coil pack...
  47. gvr4ever

    Need to borrow a ECU to test with.

    If anyone in central Indiana or the Lafayette area has a known working socketed ECU, I'd really love to borrow it. Please PM me if you can help.
  48. gvr4ever

    Need sensor ID

    Is this a coolant temp sensor? Its located under the intake by the throttle body. I damaged the wire removing the head and need to re-attach it.
  49. gvr4ever

    AC compressor plug

    I'm trying to put the final touches on my car. I marked most connections, but forgot one.Could someone try and describe where the AC plug attaches? Even better yet.. A picThanks
  50. gvr4ever

    Axles

    Driver side axle that connects to the extended drive shaft from the transmission. Any trick to separating the extension from the half shaft? I know I've done it in the past, but it seems really stuck on right now.I thought I was simply changing the boot, but part of the axle just came off...
Support Vendors who Support the GVR-4 Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications RixRacing RockAuto RTM Racing STM Tuned
Top