This got brought up. I never thought about it, but having a gentleman's argument over the speed that the timing belt spins.I would think he belt turns at the same speed as the crank sprocket which is the engines rpm. Kinda of a thinking question though. Cam sprockets spin at 1/2 speed of rpm...

Thought I'd post up a bunch of specs and info on rebuilding the manual trans. Be nice to have all the recommended clearances and as many part numbers as possible to help makes things easier and quicker to reference. All info comes from various dsm gurus and copied posts from the tooners...

Saw STM just put out a new way to adapt AN fuel lines to the fuel pump hanger. Looks very easy to use. Thought I'd share.Bulkhead adapter

Anyone know what machining is needed to convert a 14b center section to fit the 20G wheel? Yea, I know a bastard question, but been digging for info on the exact machining that needs to be done. Not looking for a how to, nor the compressor cover machining. I got a guy willing to machine the...

Been thinking about whether or not to clean up the inside of my trans case and polishing the insides to allow flung fluid to retreat back to the bottom faster. Posting this to see what the opinion of the gurus here have to say. Part of me is thinking its a wasted effort, but want opinions.

Looking for EVO 3 gearset, maybe parts. Need to rebuilt blown trans. Let me know what you have.

Looking for some input on using a 100 shot on top of using E85. If using a wet shot, then how would you calculate the jet sizing? Would it really work out to 30% over a fuel jet? Got a good deal on a bottle and I'd really like to see what the S16G can do with a 100shot in the high end. Been...

Up for sale, cheap fuel upgrade:Rx7 550cc/min injectors. Ran on gas, pulled from running car. Performed at home injector cleaning/testing (using Jafros method) All four spray good and equally. All pintle tips are good. Will need new seals and spacers. Otherwise, drop in injector for the...

I'm going to be switching to a ACT 2600 plate and a OEM disc. I know that .610" step is what is recommended, but is this number right for every disc/flywheel/plate combo?Yes, yes, odd combo, blah blah blah. I have the plate leftover, got the disc for 80, and have a ACT streetlight flywheel...

Just happened to have my car on the hoist and decided to check for wheel play. My left front was very very loose, I thought what, it's all new components in the front. Well after looking I found my ride height locking collar had worked its way loose. No idea how, but I'm positive I tightened it...

I've heard a blown center viscous will cause wheel noises and weird hopping while turning hard, but what about causing the front wheels to spin but not the rear during a launch. 715 is now doing front burnouts without any other issues, so started wondering if the center viscous has failed. It...

Found this video, I'm wishing to discuss. I like jafromobiles approach to, as it will tell you more about the spray pattern. This on the other hand reverse flushes the injectors without a high pressure set-up. Which I think makes more sense to remove deposits.I'd like to hear what everyone...

Just found the new Deatschwerks DW301 fuel pump on sale at Vivid Racing for 125 shipped. No install kit, at least I didn't get one. This pump is identical to the Wally 255hp Gss342 pump, which is what we need for the GVR4. If you don't know it's a 320lph pump that MAPerformance is claiming up to...

I got excessive backlash in my rear 4 bolt. I went to order up new parts and on JNZ the pic shows 3 bolt flanges, and the dealer is only 3 bolt flanges too.Anyone have the correct part numbers or know if the 3 bolt seals/bearings/collars are all the same?

Looking to see if I can generate some interest in multiple sets of brand new in box, OE mitsubishi EVO 8 Valve springs. These are the standard beehive springs. Let me know. It will take up to 2 weeks to ship. I can get multiple sets. Pricing is for GVR4 members currently.Again, brand...

Couldn't find much info that pertians to my question. When you shut off an engine, is it normal for the lifters to collapse a bit from sitting, or should they all be extended? See in pic how some lifters are raised, yet some are pushed down. Working on friends car with odd issues, and saw this...

So I've inherited a Big 16G center section with a China EVO III GT cover. The cover will fit a 20G wheel, so I'm looking to build it into a bastard. I'd like to see what everyone has heard and experienced with the different vendors on EBAY. I'm working Justin on tuners, but I'm sure I can just...

I know the jays racing rear toe eliminator works very well, and welding up the front bushing to make it solid works well too, but I've been looking for a cheap and quick idea of a limiting brace that reduces the overall amount to active toe. Well I got to thinking about using a sway bar link...

Anyone plan on setting up the new addition to the ecmlink gadgets? I'm I will once I can afford all the pieces, just wondering if anyone else is, or even knows about this.Ecmlink ethanol sensor info

It's rough, it's old, but it's a solid functioning valve. Genuine valve I bought a few years back, then stashed it in a box. Completly forgot about this guy. Just selling since I don't need it. Includes chunk of 2.5" piping with flange.Asking $100 shipped CONUS. I'll pay PP fees. Send as a...

I did ask over on ECM forum, but thought I'd see what the experts over have to say. I've been wondering about the cyclone manifold and timing curves. Right now I'm just using a modded EVO timing map in link. I'm wondering if I should have a different curve based on the activation point of the...

FEELER:Looking for interest in my low mileage evo 8 kyb struts. I have front cut Robispec springs on now. Struts are ready to install, have brand new bumpstops in front, no leaks, preform well, and only looking to sell for a swap to coilovers. Have spare robispec rear springs, never...

Thought I'd post this here for a discussion on the recent events in the for sale section.I'm not sure going to mandatory pics will help, however there has to be a limit. I know there are several ads with pictures of solenoids that take up the whole screen.Personally in ten years I have yet...

Wondering if anyone has been running either of these pumps and with what results? Been out a while now and I think I just ate my second walbro 255hp with E85. Looking more for a reliability and longevity opinion.

Looking to buy a clean oil pan. No dents, no rust. Minor paint flaws are fine. Don't care if the drain plug threads are trash or not.Pm with what you have, will not buy without pics please send with PM or text to 605-431-7038.Price quote shipped to 57105 commercial address.Thank you, Ryan

Looking for 5 lug parts. I can get the front spindles through the pull and save, really just need the rears. I will take all four though if unwilling to break apart. If you have only the rears that's great.I have sent multiple messages across the board and no one seems to answer. I'm...

Looking to find a jdm rear bumper. Any color, KG would be great.

I'm getting ready to start on the exterior of 715. Painting will happen sometime next spring/summer. Before I do that though I need to decide on what bumpers to use. Rear wing will be deleted and a stick on M3 look lip will be used instead.Looking for an opinion based thread regarding using...

I doubt I'll get much from posting on here, but I'm searching for an AMG Cyclone intake manifold. You overseas guys could really help me out. I'm willing to pay, and will have all funds met in two weeks. I'm starting the search now though as it will take time I'm sure. I'm aware the cost could...

Anyone heard of these mufflers: Aero Turbine mufflerBeen shopping for a custom 3" exhaust that's stupid quiet, saw this and was wondering what the gurus think.

There is a harvest days event coming up next Sat (Oct 19). I'll be heading out with some things in mind. They do not have any 89-93 Galants, but several non turbo T/E/Ls. Pm me with any parts your needing and I can see what I can do. Honda, Mitsu, ford, chevy, etc. Let me know guys.

I was wondering if all the 2g Maf's are the same. I see ones labeled 605, 553, etc. Is there a certain one that's best or does it matter?

I've had a bone stock NON-turbo head laying around for months now that I want to part with.This head has 70k actual miles and zero issues. Never been machined, never abused. This is a perfect head to mod. If your not familiar with the non-turbo head, it's the exact same casting as a turbo...

I have a 9amp parasitic draw. When I pull the defogger sub fuse in the underhood fuse box(the pink 30A one) the draw goes away. Does anyone know if that fuse supplies power to the defogger circuit only?If so I'm pulling the fuse and worrying about that later.

Heat sheild for Fp race manifoldRead about these a while back. Guy on tuners designed it and now JNZ is stocking em. Looks great, spendy but very nice design.

I was thinking about my first Gvr4 and got me to wondering about sharing stories. I first bought a GVR4 back in 02 at the age of 18. I had never seen or heard of these cars, but I wanted it anyway. I still remember the classified ad I found. I fell in love immediately, even though it was stock...

Is it possible to fix the legs on a socketed ecm chip? Buddy of mine just broke his off.

I got a K&N flat filter for a 2011 Civic SI. Low miles. Clean, I could clean it if you really really want. Looking to get $30 shipped CONUS.

I have a set of denso 195500-1370 injectors. Rated at 550 but will flow 580 at 42 psi. Came off running car. Has new upper and lower seals. 120 shippedQuick release injector clips 25 shippedOld school Blitz BOV. Loud and adjustable. Great shape seals all good, horn included. $50 shipped.

I blew out an evo front strut on my car. Looking for either one or two EVO front struts. MR or GSR will work.

Rear window visorOOPSWrong area, mods please move to parts for sale.

I was helping a buddy get his GVR4 up and running last night and after I went through the harness to clean up all the hacked wiring and get it back to stock we tried to start it with failure. Checked for spark. That was good. Hmm fuel? Checked the injectors and they were not clicking. pulled the...

Thought I'd see what kind of interest there is in some FFWD knuckles, both 4 and 5 lug. These will reduce bump steer on lowered cars. I can get several from the local pull and save. I can do left and right for $65 set, plus shipping. I know shipping will be around $30-40, possibly more pending...

I installed EVO 8 struts and springs a while back. I also ordered the TEIN upper mounts for the VR4 back during the group buy. I've had them sitting around and finally decided to install them. Well, I'm not happy. For some reason the front suspension is now sitting about 1 inch higher than it...

Curious if anyone else has been having issues in keeping the bosch 3737 wideband sensor alive. In the last 30k miles and 4 years I've had 4 sensors fail now. Each one will just stop responding. I've done free air calibration, heater calibration, checked voltages and such. Seems like they are...

Anyone had push lock rot out in a two year span of daily driving? I just happened to notice my -6 fuel lines weather cracking and ready to let loose at the fittings. The feed line is cracking the whole length from the filter to rail.

I got a friend who has an external oil cooler with a 90 OFH. The cooler starting leaking badly and he has no money to replace it. I got some plugs that fit the oil housing inlet and outlet. Can I just plug off the inlet and outlet without issues? Will I need to remove the oil bypass valve and...

Looking for two 90 degree silicone or not 2.5" couplers. I'm not interested in $50 couplers, looking for cheaper used couplers. Clamps would be nice too, but not needed. Have paypal ready to send.

evo 560 injectors for sale, 40k miles all have good spray pattern 120 shipped. BNIB OEM main bearing bolts. All 9 regular and one odd for the strainer. 50 shippedValve covers: Cover #1 Paint is horrible, however, it is in mint shape otherwise. No cracks or damage. $50 Cover#2 Has paint...

Not sure if this is listed somewhere, but thought I put this here in case not.MB687004 Evo 3 larger bolt spread gasket for O2 housing to Downpipe. Was under 10 bucks through the dealer.