The Top Mitsubishi Galant VR-4 Resource

Join the best E39A 1991-1992 Mitsubishi Galant VR-4 community and document your GVR4 journey.

  • Software Upgraded - Reset Your Password to Login
    In order to log in after the forum software change, you need to reset your password. If you don't have access to the email address you used to register your GVR4.org account, you won't be able to reset your password. In that case, follow the instructions here to regain access to the forum.

Search results for query: *

  1. 1941galant

    Bought a 1g BOV and a pressure switch off of him. He even drilled, tapped and installed a nipple for the leak stop kit. Can't say enough good things about Hill.
  2. Fuel Pump question

    Thanks for clarifying for me, that could have been disastrous. I didn't get a chance to get the hose today and that's probably a good thing. Thanks again.
  3. Fuel Pump question

    Gotcha, thanks. I searched and saw a couple people using high pressure fuel line I just wasn't sure of the diameter of the hose. Just wanted to be sure I'm using the right stuff. I'll go out tomorrow and post up what I get.
  4. Fuel Pump question

    I bought a fuel pump that doesn't quite line up on the flared section of tubing and I'm afraid of it not getting a good seal on the o-ring. I was wondering if anyone knows the diameter of fuel line hose I would need to use so I can just cut off the flared section of the assembly. Saves me a...
  5. BluFalcon

    Got a set of injectors off him, packaged very well, just as described and shipped quicker then expected. Great guy.
  6. What is the purpose / use of your vr4?????

    Quoting turbowop: I bought my car to pick up groceries...oh wait.Fixed
  7. What is the purpose / use of your vr4?????

    I'll take mine out on the weekends I'm not working (drag strip or just crusing). Other then that it just sits collecting pollen.
  8. it was well worth the wait!

    Absolutly beautiful, very tasteful! Its always nice to see black window trim instead of the typical fade too. I wish I had some extra coin for a paint job.
  9. The EVO/Aftermarket seat bracket suspense date of April 5th

    1) ls2gto............... Stefan.............. 2) 4DSC................. Nick................ 3) Garfield Wright...... ditto............... 4) Jesse W.............. Jesse...............YES 5) Dusty Duff........... Mike................YES 6) 4thStroke............ Spencer.............YES 7)...
  10. The EVO/Aftermarket seat bracket suspense date of April 5th

    1) ls2gto............... Stefan 2) 4DSC................. Nick 3) Garfield Wright...... ditto 4) Jesse W.............. Jesse 5) Dusty Duff........... Mike 6) 4th Stroke........... Spencer 7) dmj.................. Dexter 8) ejc.................. Edgardo 9) stealthtt24.......... Mark 10)...
  11. What you would like made in Carbon Fiber

    Carbon fiber or not, I'd like to see a place for 2 60mm gauges like where the dash pod would go or maybe in the vents. Other then that I can't think of anything that I would buy strictly carbon fiber.
  12. LSX swap into a vr4

    LS1 Evo
  13. Can't get oil feed tube to fit properly

    I had the same problem when I switched to a 2g manifold. I just made my life easier and bought a braided line. Looks better and much easier to install.
  14. big 16g 2gmaf 560cc?

    I have a 2g MAF, 560cc's and a keydiver chip. Runs like butter. Your thank yourself for buying the chip.
  15. $3.33 catch can special

    Thats awesome.You can get them at cheap retail stores like Marshalls. My girlfriend just got one of these at the Christmas Tree Shop.
  16. help me pick the right paint for my car!!

    Quoting crankwalk: Quoting iceman69510: Try this:green galantThat color is rough!Thats Calypso green, I used to own a fox body coupe with that color. It doesn't look right at all on a galant.
  17. help me pick the right paint for my car!!

    Cosmic green. Im more of a fan of darker greens but I think that VW green wouldn't look too bad.
  18. Any one have a pic of your ETS..

    1g bov towards tbcurrent setup
  19. Jackstand Balling Crew...

    Just joined the club
  20. i need bumper brackets

    Oh i see, I don't have the one your looking for. I have the piece with the stud that you unbolt to get the JDM bumper on.
  21. i need bumper brackets

    I have one. Pm me with your address and I'll send it out for the price of shipping.
  22. Any one have a pic of your ETS..

    I have an ETS pipe with a 1g bov flange that sits closer to the throttle body. I'll take a picture of it when I get home. Right now I have the piping with the bov flange in the same spot yours is with a greddy bov. I personally like the cleaner look of the bov sitting lower, I just rigged up...
  23. ARRRGGG

    So your driving the car with it chipped for a 2g maf but actually running the 1g maf?
  24. y?

    More wheel selection, they are stronger and they give the ability to disable abs.
  25. Defi Link Installation

    You could do either but I'd probably just ground chassis if its easier.
  26. Defi Link Installation

    The back of the clock where the connector plugs into looks like this. The "1's" are the pins inside the back of the clock where the plug will plug into. So Acc is ignition, clock is 12v battery, earth is ground and Illumi is well, Illumination. I just soldered into these wires and it works...
  27. Heater core, Best to go OEM?

    I bought a used one off a member for like $20 shipped and has worked great since.
  28. DS axle question

    My driver side axle is bad and want to replace it. Can I just pry between the axle cup and intermediate shaft to get it off or would it be easier to just take the intermediate shaft off also? I'm sure this dead horse has been beaten. I searched but some time the wording throws me (edit: I'm...
  29. stock intake mani

    Extrude Hone is the name of the company. Link
  30. Crankwalk

    Bought a set of fogs off him. Package arived before the quoted time, how cool is that. Also packaged very well. Thanks again Jay!
  31. CP

    Bought a couple parts from Cy. Great communication and super fast shipping. Also packaged very well. Thanks again!
  32. stock boost gauge....

    Most people get it converted to knock count via a keydiver eprom chip. Thats about all its good for.
  33. Pretty paint color

    I just love the direction this thread went.
  34. FS: Modified Mag (VR-4 Fever) Agent 1051 zomg! :noes: $25

    ^ I can drive around New Castle county Delaware (not very big) and find atleast 10 GN's and maybe 3 GVR4's.
  35. Dual Guage pods

    I can't wait to see them painted. I need a clean solution for 60mm gauges. I have 2 screwed down to the driver side dash speaker cover and don't want to go the pillar route but looks like I might have to.Looks great though, can't wait to see the finished product.
  36. Any interest in a two gauges dash pod.

    I know two 52mm gauges will fit (obviously) in the gsr pod but 60mm won't. I tried but was dissapointed. I wouldn't mind getting a pod for two 60mm if I had the money.
  37. Alternator

    I replaced my alternator in August, it died 4 months after I bought the car and so far so good but I've noticed the volts a little lower then usual lately.I had my other alternator rebuilt but buying an oem and not having to replace it every year sounds great!
  38. Defi Link Installation

    I hooked my defi-link up to the wires behind the clock on the dash. If you look on the back of the clock it tells you which wire is 12v, ground, ect. I have my control unit in the pocket of my 89 dash and just took out the gauge cluster bezel and ran the wires up to where the clock is and...
  39. evo 8 seats

    Maybe get a quote for us non welder jerk offs. I might be interested in something like that.
  40. Dragstrip results wed 05/06 with #931

    Nice times. I'm suprised your dragstrip was even open. It seems like they close Cecil County Dragway if rain is even in the forcast for wednesdays. Pretty amazing you got 5 runs in 40 minutes.I'm hoping to be in the neighborhood of your times when I get my e316g installed.
  41. motor week road test of 1991 galant vr-4

    The vr4 vid has been posted a couple times but is a classic and I don't recall ever seeing the GSX vid.
  42. Wiring info, eco/pwr switch

    Really? I just bought a multimeter the other day, so I'm still learning on it. I'm not very knowledgeable with electronics but I'm learning. Maybe this should be moved to the newb section .
  43. Wiring info, eco/pwr switch

    I was thinking about using an eco/pwr switch as a high/low boost switch for my greddy profec b. If anyone has info of what wire is what I'd greatly appreciate it.
  44. GSR Active Suspension Display Pics

    Turns out I don't have any pics. I kept the metal legs on and cut slits thru the plastic. It holds pretty tight just like that. All I had to do was cut away a section of the dash material so the dash pod would sit flush to the rest of the dash. Also there is already a hole in the back there...
  45. GSR Active Suspension Display Pics

    if you search the how to archives there is a write up about it with a couple pics I believe.I ended up buying another dash to install my dash pod into. I didn't want to cut up my original. I think I have a couple pics on my home computer. I'll post them if I got'em.
  46. Age of you VR-4 Owners?

    26 years old checking in. Man, there are alot of old guys around here! J/K
  47. The Individual 4 Door

    ^ Is she insinuating that your a loser if you ride in the back of a Galant? I noticed her sign language.
  48. 91GSR

    Got the stickers, looks perfect. Thanks again!
  49. VR4 Pictures Post Here !!

    #1810/2000: Dirty interior Dirty exterior
Support Vendors who Support the GVR-4 Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications RixRacing RockAuto RTM Racing STM Tuned
Top