I'm looking for a galant AC tensioner bracket/pulley. It's different than the dsm version. This picture is of the dsm version, but it's the part I need just the galant version..

I'm looking for the adjustment plastic piece that is circled in this photo. If you have the rubber hoses that connect to the back of the light housing I'll take those too.Thanks,

I am selling my spare 4 bolt rear end with axles and cups. $200 plus shipping.

7 Blade 60mm Billet HX40 for sale. I was told it needs to be rebuilt. Sold 7 Blade HX35 for sale. I was told it was good and was pulled just to upgrade. But it should probably be rebuilt. Not for sale. FIC 850 injectors $200 shipped. 2G V2 DSMLink $400 shipped.

I'm looking for a good condition center vent with no blemishes. Please let me know if you have one, it'd be shipped to 98248. Thanks. 509-594-8578

I'm tring to re-attach the metal trim piece on my windshield here but it doesn't want to stay on. The original piece flew off on the freeway, so the one I'm trying to use now is from the junkyard.Am I missing some clips here? It goes on nicely, but its not snug and I know it will come off...

I'm finally getting to take the galant to the track this Saturday in Yakima with the hx35. Its has some idle and cold stalling issues but besides that its driving pretty well. I haven't had a chance to tune the car at all, including the VE table, but we'll see how it goes. I don't have a picture...

I bought an Eprom Ecu from blueboost68 and it came in exactly as described with no visual damage or capacitor leakage. Quick shipment with tracking. Thanks

My friend is into Mazda Proteges and 323s but all the good stuff came only in Japan, so he has a friend that gets him everything that is rare and only in Japan. So I asked about Galant bumpers and he said to send him a picture of what the bumper looks like. So I sent him a JDM front and rear...

I am having some issues with my 91 galant. Its smelling like exhaust through the vents when I stop the car at a light or just idle. I just put in a rebuilt long block and I had to make my entire exhaust from the turbo to the muffler. I can't tell if/where the exhaust is leaking from and I have...

I just went out to start my rebuilt engine for the first time. Well it started up after cranking it a few times and all seemed good. I have an oil pressure gauge on the turbo to make sure I don't blow the seals and it read just over 75psi right when it started.So it ran for about a minute and...

Turboxs Dual Stage Boost Controller $125 shipped4 bolt LSD $300 shippedProthane engine mounts $80 shipped(others are being removed from car still)1g CAS $30 shippedFidanza 6 bolt AWD Flywheel $100 shipped1g Non-ABS Setup $100 shippedEBC Green stuff Front and...

Never used, comes with everything needed including a SS flange. $210 shipped

I want just one switch to change my timing/fuel maps and turn on my meth injection. But I also want to use the boost safe feature provided with the kit. It says the boost safe wire is grounded when active, so I think I got my diagram drawn correctly. Please let me know if I'm doing something...

Evo 8 Mas, pigtail, and 3" air filter adapter. $85 shipped.

Pm, call, or text.509-594-8578Stock GVR4 Shift boot. sold1g Fluidyne Radiator with slim fan. $165 shipped.2g stock unhacked MAFs. Work flawlessly $45 shipped each.1g throttle body elbows. $10 shipped w/o bung, $15 shipped w/ iat bung.1g ISC. $30 shipped...

I have three 2G MAFs for sale. All of them have pigtails with them.$45 plus shipping each.

So I went to remote start my car so I could take off and watch the superbowl, well it kept turning on for 10 seconds then turning off. So I go out and sit in the car and remote start it. My stock boost gauge showed nothing, revealing my alternator wasn't working. sh*t, right before the superbowl...

Hey I'm trying to figure out where to put my oil cooler at. The core measures 11"x8.25". I'm trying to put it between my intercooler and my unmounted scirocco radiator. My concern is that at that location it's going to harm airflow through the intercooler because of how the oil cooler is...

I'm selling the air conditioning system out of my 91 with 130k miles on it. Comes with all the bolts to bolt everything in as well. It works flawlessy. $250 OBO

I'm looking into which clutch disk to buy for 796. I'm between an ACT 6puck sprung and an ACT 4puck sprung. The 6puck sprung is $20 more expensive so price isn't a factor. I will be mating it up with a ACT 2600 PP and a Fidanza aluminum flywheel all on a stock tranny, trying to get everything...

Has anybody used this manifold on thier vr4? I'm curious as to whether it will fit with an hx35 with the outlet facing up, or if I'll have to modify my ETS FMIC setup to accommodate it facing down like the DSMs.

Just bought #628 a couple months ago from a local. Apparently it was an old church ladies car and the guy I bought it from heard it was turbo so he bought it from her for I'm assuming cheap, to turn around and sell it for a profit. 168k on it right now and running like a champ. Just fixing...

When I start my car, the coolant temp will slowly rise, then at 127* it jumpts instantly to 212*. It remains there until my car is off and and has been completely cooled down. It does that every time. Also occasionally my temp in the gauge will start to increase pretty fast and will make it...

I have a fray in my timing belt and I figured it was just the oil pan bolts, but apparently not. I pulled three bolts, two from the spot where the short bolts go and one from another spot. Well the two short ones were definitely in the correct position. I'm going to pull the timing belt maybe...

I'm looking for the upper half of the rear seats shipped to 99301. Thanks

Hey my buddy is going home and he wants to pull the TCU out of his galant gsx when he gets home, but he's not sure where its located. It's dark and he wants to pull it out real quick so he can take it to school and solder in some new capacitors. Does anyone know where its located? Thanks.

Hey is anyone currently using this ebay radiator? click If you are using it, how are you coolant temps while daily driving? I seen it mentioned in the end of another thread, but no one said if they were actually using it. My coolant temps were in the 220* area just idling in 90* weather so I...

Mods:91 GVR4 - 3" intake - Speed Density - V3 - 2g ported EM - Evo3 16G - Crushed 1g BOV - Tubular O2 Housing - 3" O2 housing back exhaust - Hallman MBC - Walbro 255HP - AFPR at 37 PSI - FIC 1050s - ACT 2600 - Fidanza Aluminum Lightweight Flywheel - Autometer Boost & EGT gauges - K&N AF -...

I just got my FMIC kit from ETS and it looks like the 45* coupler that goes on the hot side of the intercooler is too large. I measured it and it was 2.75" and parts list says it should be 2.5"You can see how loose it is in this video I uploaded. clickI lubed up the outside of the coupler...

Anybody from the PNW attending this? I plan on going, and probably to the test and tune the night before.

I'm installing a Viper 5901 alarm system and I believe I have found all of my connections except for the door trigger. Every guide I find says a green wire with red stripe under the driver kick panel. I found at least 3 different wires, but none of them show 12 volts with the door open and 0...

I tried to hook up my new PLX M300 wideband a few hours ago, but for some reason I was not able to get the device to turn on. I connected the power source to the accessory input for my stereo and grounded the black wire. I tested the accessory input with a multimeter and saw 11.x volts upon...

I have a few threads already about my issues and I'm sorry, but I'm bringing all my info on my car and my situation here in hopes of someone seeing my problem. I also posted this on DSMtuners and I'm sorry if that's a no-no, but I really can't take this anymore.I have been running lean for...

I did a few mods to my Galant about a month ago and ever since then, the car will not idle properly. It will idle just over 1k rpms, it will idle sub 500rps, it will act like its about to stall then shoot up to 1k+ rpms. Sometimes it will just stall out, and sometimes(rarely) it will idle at...

I'm at the junk yard right now and I found a pretty much complete white 93 galant. I was just wondering if the grill from the 93 will fit my 91. Thanks.

I haven't drove my galant too much in the past year, but I was driving it just the other day and I noticed that my exhaust is popping every time I'm decelerating. Also I hooked the logger up and noticed that all of my fuel trims are in the 130%'s, none are maxed out but they are all still way...

Do we want the 1g, 2g, or Evo walbro 255lph fuel pump and installation kit?I have been searching and I found threads with one or two people saying 2g or evo, but no really assuring posts. I also see threads talking about modifying the 1g one, so Im not sure and I figured I would ask to be...