Beating A Dead Horse... I know, I searched.But I was hoping to get some kind of info from someone that has used the 2g vrsf first hand or attempted and what was the issue. Or if there is a suggestion of an off the shelf kit that's been found to work well keeping AC and stock radiator, since...

Been forever and ever since I've posted on here but I do still check in from time to time. Regardless,I'm finally back to wrenching on my galant and I have found assembling my motor that my crank pulley looks terrible, a bunch of rubber is pulling and flaking out plus it is nicked up etc. I...

Well I am back at it again, trying to get my galant together before anymore snow flies in MT and try to dd her thru the winter...So in order to stop being JSB for another consecutive season Im putting most of the suspension back together and have decided to simplify and delete the 4ws and just...

I have the opportunity to pick up a set of Enkei RPF's for a steal in this size and wanted to hear from some of you first hand if these would work out. I plan to have a relatively low stance on my gvr4. Any insight is appreciated or if they will rub what I might be able to do to get them to...

Which way do the piston rings need to be on the piston? The inner edge I believe has a "beveled" if you want to call it that look and just wondering if the straight cut or rounded edge goes on top??TIA -Alan

Starting to get to the reassembly of my motor now that its back from being machined and I am a little hesitant to use these. Would like some second opinions because my machinist said nothing about them and the other people I've asked haven't worked on 4g63s or anthing remotely close, they just...

Well after close to a year w the motor out of the Galant Ive finally come back to this project and have some fund to get it ready for winter duties...Im staying w the stock pistons and rods, crank all that. Doing some new oem rings, ARP hardware everywhere and ACL bearings. New Ferrea valve...

Well its starting to get time for me to put the galant back together for some winter DD action.I have these Noltec bushing w the description R. Stub. Axl-Chas. Now I have a good idea these go in place at the end of what I would call the trailing arm, but Ive been wrong once before and was...

When I purchased 1632 the previous owner was nice enough and smart enough to give me all the stock parts he had that were no longer on the car. Well in this tote of misc junk and treasure I came across some packages of Noltec bushings that I would love to get onto the car while its still JSB...

Ok so I already know I am in over my head... With that out of the way here are some questions and scenarios.I need to replace my valve seals as quickly and on the cheap as possible. How do I do this?THE SITUATION: I pulled the motor out of my galant a few weeks ago to attack many problems...

While I have my intake mani off is there anything I can do to it to make it perform better? Can I port it out? Maybe someone has a link they could show me on a 'how to' do this...TIA -Al

Having trouble deciding what cams to go with while I have 1632's motor out...I've been looking hard at the Brian Cower 272s BUT I want whats best for my e3 16g and I have the impression 272s are starting to get towards too much top end power. I'd like to have as much low end/fast spooling...

I know I know, This subject has been beaten time and time again.... BUTI've been doing more and more searching and just getting more and more confused. Will someone please give me either a link or describe to me what I need to get this done. Palm seems the way to go via cheapness or...

I recentley acquired a Greddy Profec E-01 Boost controller for free for wrenching on a friend's ebo for him. It may or may not be missing some pieces but it seems to be all there when I took a quick glance.Im interested if anyone has used these with our G rides or had direct user knowledge...

To his their own...I've been looking into buying new rims for the G ride. Now seeing is this is the best place to get info on them bar-none I was hoping some of you guys would help me out.I want to rock a really aggressive rim on my Galant once I get around to affording them again, lol...

Here we go again, got to love them G-ridesFreezing cold tonight (-12F) heading home from work on interstate and notice that cars been running a little hot, (on stock gauge), it tends to do this off and on and I just thought it was from the newly installed PWR civic sized radiator...But I...

If everything works out Im going to be heading up to Bozeman after work tomorrow night with 1632. I have to tidy up a few loose ends like aiming the headlights and hopefully drill the hood for some window sprayers and find a reservior.Maybe I can meet up with some of you guys that are local...

Not sure if I should post here or in newbie section but Im sure it'll get moved if need be.With my clutch on its way out Im trying to do some clutch research like everyone else it seems.Im not a big fan of ACT, maybe its what Im looking for being the best bang for buck but to his their...

-Another night defeated by the G monster. I Have been in the process of making my Galant a little more my own since I bought it a year ago. The tasks: replace cracked radiator with small civic PWR rad, redo exhaust CMP style threw GW, 5-lug conversion w/out ABS, Cruise control delete. Then...

Still trying to get my G put together every spare second I have but got stuck tonight.I used my puller and got the 3 bolt axle cup off and everything fine but now I cant seem to get the hub out. I havent taken the other side apart to see if its just this side or not but for the life of my I...

Tore into 1632 a little more tonight and finally got around to doing the brake pads and ss lines -yottta -yotta -yottaLong story short I get my old calipers off and everything, pop the old pads out and go get me brand spanking new Hawk pads that I ordered from JNZ Tuning only to find that the...

I've really been thinking about redoing an extra VC I have and would really like to do the AN fittings on it and then do a sweet catch can setup off of that.My question is how do I shop for these AN or NPT fittings? Can anyone explain or have a link or something that can get me pointed in the...

Where have you guys found the best place to buy porting bits? (Quality/Price) Should I just go hit up my local NAPA or Carquest? Anything special I should know about buying them other than Carbide?T.I.A -Alan