Quoting strokin4dr: There has to be someone local to you that can set the damn idle for you for a 6 pack.I don't drink but I work in Hagerstown everyday, I live right across the PA line. I noticed the concern is in Hagerstown. Get ahold of me I may be able to help. If you want to text/call...

In search of a Q45 tb for my GVR4. Thanks for any replies! you can also text me at 7175528179

Looking for a COP setup for my GVR4. Thanks for any replies! you can also text me at 717 552 8179Mitch

you have PM for the COP

what do you mean during shifts? do you mean the shock of clutch engagement or other reasons? I am trying to achieve saving my money on a set of mount inserts when I can just give my budy 10 bucks to cut some washers and weld them in at work, And I dont want the engine to move anymore haha

Are there 4 of the mesh style wheels clear at the bottom of the page?

I have been slowly putting together 1972/2k and after a few years of running stock mounts and wondering if my motor moves too much I'm starting to kick around the idea of solid welded mounts. I have access to a laser to cut out washers to weld in my factory mounts after all the rubber is cut...

after realizing I had the internet in front of my face I did some research, would you take 50 for the valves I will buy them as soon as u let me know how to pay shipped to 17222

Never heard of these valves? I've been looking for a set for mine, does anyone run these in there car?

i have one of these. just broke the passenger side. lmk if still needed. you can text or call any of my numbers. 717-655-7601 or cell 717-552-8179

call me the thrid then. haha. i have money ready when you need it

is this car still available?

My Vr4 will actually be there. Got the ambition to work on it on the week nights and got it all done. All it needs is exhaust.... well. doesnt need, but would be nice. But it will be at the ocean this year. I think we all need to meet up one night seeing that I've never met with any of the board...

I was thinking of putting this in the parts wanted, But its not really a part. I'm trying to find a cheap laptop someone may have laying around. Recently my gf left me and took ours with her because she paid for it, Which is fair but now I need one for my link setup that I just ordered! You can...

Also recived mine on thursday! Thanks alot!

hopefully its not like my intermittant problem, Knock on wood its been good to me. Every once in a great while it would kick the dome light on like the door was open and the windshield wipers would run nonstop, so i pull the fuse to the wipers and shut the dome light to off on the switch. never...

I praise you for buying this car! I would have bought it myself if I wasnt on the other side of the country.... I look forward to seeing it together, Be sure to take alot of pics and video when its done and in action. Good luck!!

Ehh.... Bigger turbos give the other guy a chance. Theirs not a hole lot of cars around my area that showed my thrill for power high in the rpm range like mine gives you, Right now I have a t4 twin scroll 60-1, I forget what size the housings are on it. But I would never give up the top end...

Thats why I'd love to see some nice Mitsu cars down their to cruise with so im not surrounded by street tire equiped full drag v8 cars with exhaust pounding my heart out of my chest, Not that I don't enjoy them! My vr4 wont make it this year, I'll be in my bagged Mighty Max instead. Too much to...

I will be at the car show/cruise week in may at OC was hoping to meet some fellow gvr4's there, Does anyone go to this event?

I'll do it too!!!1. Snohacking 2. JCorbo 3. Lesac 4. MitchooO

??? Would anyone actually buy this? I'm not tryin to be a prick, Just looks like something that I would throw away. haha

Is the pod for a galant or an eclipse?

Ok thanks guys for the input! I was just curious to if anyone actually rebuilt one that was in this kind of shape and made out ok with it. Is it not the best decision to put this clutch in for street use? Mine is always drivin on the street. I have a clutchnet red pressure plate with a 6 puck...

Do you know how it got warped? Did you ride it too much when you launched it on the street or do you think the clearance was wrong for the throw outr bearing and it kept pressure on it the hole time? I'm interested in used parts that I can get rebuilt. but I'm just not sure about this one. These...

I'm not sure if its anything like the ecu in my civic, When we had the ecu chipped for the car we drove the car to him and he chipped it, Put a 2 pin connector on a jumper with a removable connector on top (like a switch) so we could drive it home stock, Then when we put the turbo setup on it...

I am sure more people than me have seen in the pics exactly where it was coming into the cylinder in the last set of pictures. I can see the gasket material is a bit different in the path from the water jacket hole and the cylinder, I would be sure to check in that area the most for any warping...

wow, been thinking of doing something like this for a long time! I constantly have issues with my hard t-stat wiring cracking, very nice diagrams and pics! hope to see the finished pics soon! where did you get the wire loom for this project?

I have found various pics of his car but cant seem to figure out how to locate him to maybe talk with him about it. none of the pics are a help from the angles they were taken.

I've been searching around pictures on the internet and cant find any pictures of setups that you can see a clear shot of a turbo oil return on a custom fab top mount. maybe I missed something but I cant seem to find a route for my return without running it right into the manifold runner or...

deliver to pa??? hahahaha. damn wish I was closer...

I need shift forks! ill pm you

I'm looking for a decent fwd clutch setup for a project of mine. Stock flywheel or lightweight, Need a pretty good clutch to hold power to a good size slick. Please contact me on here or on my cell phone at (717)-552-8179.Thanks, Mitch

broke the 2nd trans in my galant last night, just looking for one locally around me hopefully. I live right above the pa/md line around waynesboro/hagerstown. I may be interested in one anywhere, depending what shipping costs on a trans. If you can just text/call me at 717 552 8179. thanks for...

We all know the answer to that. It's white. lol

I had just found that a new guy in town has another galant and we got to meet up and actually have 2 gvr4's in the same place! I have been the only one around my area since I had aquired my car a few years back. Its very new to me to see 2 of them locally in person at once! enjoy.

heres a few shots of the only 2 vr4's in the area! pretty exciting actually seeing 2 together where we are from!!

I have had one too many bad experiances with my abs, thats why it had to be deleted. If I would go over 70 mph on dry, stable hard road like a highway, The abs would kick my foot back as soon as I tried to brake. Fortunetly the first time it did it to me I was going 80 on a mountain road and...

So I've driven my car for years, had it apart for 1 1/2. Put it all back together with no power steering, No A/C, All I have is the waterpump and alternator. for some reason if I have any power load at all on the alternator the belt will squeel If I dont keep the RPMS above 2k. if it does start...

Maybe a stupid question, but im not fimiliar with these cars... are all the colts and other similar body cars have the master and slave on the right side of the firewall?? Also, how much for the shell? I did not see a price on that

How is the issue of rust on this car? It looks to be very clean body wise but how are the rockers, subframes, and body supports underneath the car?

ill take them!

ill take it!

Is their a possability that you would seperate the gauge? I have the same setup and dont have a gauge?

could you show apic of where the wires are cut? i am very interested

If im not mistaken that resistor box is actually the one for the fan control of some kind, idk wat it does or how it works but it is all connected to the fan switch mounted in the radiator and the wires should go to the fan. and that little black 2 wire connector by the washer bottle looks like...

dibs on bare shell! haha..

All you need is a test light and your set... Just know where 12v hot, 12v switched, And a ground right? for the timer part anyways.

Just to throw this in here, I had put a 14b on my stock setup 2 years ago without water lines and its lasted 2 weeks before it blew the exhaust wheel apart, I wasn't sure if it had anything to due with the water lines not being on or not, Just for a thought, Maybe it was just time to go bigger. lol

I have been putting it off for a long time to post everything up here, So I'll do it now to see what you guys think!! So far I have nothing done to the body as far as paint but have the gallon of bright white that I wanted to do the entire car, I swapped out all 4 doors, both fenders, and the...