Thanks all. That is what I remembered, but wasn't sure if there were options.Board scores again!

Hi board,Had a 4g64 block / 4g63 head hybrid motor built a few years back. The shop is no longer in business, but I need to know which timing belt you use for this combo.Thanks in advance,

Thanks to Randy for flying out from St. Lou, Mo to pickup the car. Should be a fun drive home. 1392 is off on a new adventure...

I've updated the post with new information.

I thought the battery might be the case, I have been very busy (hence the lack of response on here) so I haven't checked the battery yet. Pending that the battery is the culprit, the price will be raised for the car running. Again, fastest way to reach me is via email.

****I have replaced the battery that was bad with a brand new one and I reset the ECU (the battery had glitched the ECU) and the car is now running again.****For sale is my 1991 Mitsubishi Galant VR-4 (#1392/2000). These cars came to the U.S. in limited production in 1991 (2000) and 1992...

Mine got crunched in a wreck. Need a replacement. If you have one you would be willing to part with, let me know.Thanks in advance, Greg

Hi all,Turbowop kindly sold me 1051's original rear bumper. Now I'll be a part of historyThanks everybody that replied.

Got smacked in the drivers rear quarter and need a new bumper skin on my '91. I'll need the side marker and support bracket on that side as well. Car is sitting at the body shop so I need these pretty quickly. Would prefer local (Seattle area) but beggers can't be choosers.Any help...

Just got done doing this. Not easy, but the solution for me was pretty easy. I used the stock location, but had to make a set of heavy washers with one side ground away ("D" shaped). Then I used my vice to squeeze the brackets as much as possible to still fit over the new bushing. Lastly, I...

Hey QuadStroke,You realize that I picked up your car in Daytona Beach, FL and drove it back (sight unseen) to Bellevue. Two and a half days including dinner with my sister in Topeka. Daytona Beach -> St. Louis -> Denver -> Bellevue. Considering it was only running on three cylinders and the...

Hi Andre!That is what I thought. I just didn't want to force fit it and be wrongWrestling with front sway bar removal this morning. Once I figure which way to twist what I'll get rolling again.Thanks for the reply and we'll be talking soon about the exhaust and motor mounts. I've...

I have the other bushings for the upper and lower control arms (and yes, one has the offset inner). This is a much bigger bushing for the rear swing arm. I was assuming that it was like the front swing arm, but can't tell how I'm suppose to install it. This is the only installation picture I...

Hi all,I joined the JSBC this weekend! No problems, just finally getting around to my Whiteline install.However, I'm feeling pretty stupid as I can't figure out where the W0624 bushing goes in the rear. The bushings don't come with any instructions and the Whiteline website doesn't...

I used a 4G64 block with 8.5:1 pistons. Mildly ported head with 264 cams. 14B and all stock fuel and air plumbing. In this configuration it makes 200 whp - 210 lb/ft. on 7.5 lbs boost (no boost reg, just hard plumbed) and runs on regular gas. No ping until you heat saturate the stupid stock...

Quoting kartorium: Quoting teamhightower:EDIT: BTW - try to keep as much sidewall as you can. That makes a huge difference. You need the tire to 'mold' to the ground as much as you can, so don't go with short profile tires. Unlike studs where you 'go skinny', with studless you go wide to...

Which Blizzak did you have? They come in (at least) two flavors. One is best for ice and the other best for snow.LM series is best on ice. WS series is best in compact snow. I've run WS-50's on my VR4 in the arctic and they stick like glue. I'm told the LM's are better for black ice...

Hey Andre, quit playing around with your car and finish my transmission!!Oh, and it's great to see you finally getting the ride going again (and I do remember 1998). When you get it back on the road, I want a ride.

Yeah, the 1g looks like a good match.I know I'm being anal about it. I like to TSD rally the car and the closer the better. Our cars are much better then 5% accuracy, just have to figure out where the needle got pressed on. Anyway, if I didn't rally the car I wouldn't care so much.

Nope. This is a chart of the trasmission gear ratios. Not the same as the speedo gears. Searched VFAQ for the speedo gear chart before posting. Heck, I love VFAQFor my other cars, I have charts that list what years had which speedo gear. That way you can change either the final drive...

Hi all,I've search, but could not find a list of alternate speedo gears for the VR-4. I know there are other gears with different ratios out there from different cars (1g, 2g, etc), but can't find a list of what ratio they are. I'd like to get taller tires for my ride and it would be nice to...

I want to thank you for all the fine work you've done on my car. Your rental period is about up and I'd like you to please return 786 to my driveway. You may pickup 1392 and perform similar work.Nice job, Dude.

I did the gauge in the middle mod, but used a PLX multi use display. This way I have four different gauges available as well as idiot light protection. You can read more about that on the PLX site. Here is a VFAQ on how to do the in-dash mods for the center gauge.Center Gauge VFAQ

I also used this intercooler on my first Galant. When I had the pipes cut and rewelded I also had a bracket added bottom and top to span the old intercooler holds and to bolt into the hood support above. This was very stable and located the cooler pretty well. Also using the long metal low...

Ok, really it was just ME getting the twins together for pictures. It was a reasonably warm day and winter is approaching. Not to mention it may be my last chance since I may see #786 drive away tomorrow.Anyway, I like the shot and thought I'd share...

Keep hate'n. Drive the price down farther so I can buy a couple more greenies.Cops pull the white and black one over and let the green ones go 'cause green cars _most_ be slow...

Buying from Jesse is great. This guy is a real business man.This last transaction was a very large suspension buy. It resulted in several boxes of goods to be shipped. At one point, I'd recieved what I figured was all the boxes and was missing a few pieces. My first contact with Jesse he...

Hey there,I'd be interested in those ball joints. Just so happens I'm going the be tearing the suspension apart to put in the Whitelines and it would be a good time to replace them.Next step is...Greg

One-way Atlanta to Seattle is about $250. No better way to see the country then from the seat of a GalantThanks!

bump for adding interior pictures to the picture page.786 picture page

Thanks. I'm always amazed in the number of VR-4's that live in Florida. Must be for all of the snow

SOLD to 4thStroke. Great guy and hope to see him here on the board in the near future! --------------------------------------------------------------------------------------- This is a 1991 Mitsubishi Galant VR-4(more pictures exterior/interior here... ) Engine bay looks like a...

Bought a manual seat belt setup from Jason. Since we live near each other we worked out a meet to swap dollars for parts. Jason was very helpful in trying to reduce my travel time. He was more concerned about my time then his own. How refreshing that was.He had done a very nice job of...

Bought a short shifter and boot from Steve. First attempt to send me this package was foiled by the USPS destroying the box and loosing the contents. Steve contacted me right away to let me know about the delay and sent me a second set. I really appreciated his communication and the fact that...

I was in need of a cheap stock radio to put into my VR4. Mike offered to send me one he had laying around for just the cost of postage. It was being FedEx'd to me faster then I could get the PayPal to him and it arrived the next day.I would have to highly recommend Mike as a Good Guy...

Couldn't pass up this deal.