Galant is long gone but I found these in my shed.This is a complete set with original hardware. They're in good condition overall, only one of the piece has a broken tab (pictured). Any questions, let me know.I honestly have no idea what these are worth, so lets say $50 for the lot...

For sale is a complete Thule USDM roof rack. I bought this from MistaVR4 a few years ago.Complete kit, nothing is needed. Just add your preferred attachments and it's good to go. Includes roof rail trim that's perfectly sized to accommodate the roof rack, along with cover plates for when the...

Hi everyone.I'm considering selling my Galant and wanted to make this known to the members of this board. I also intend to post this for sale locally if I don't get any interest here.Imported from Japan in 2006. Had 87,xxx kilometers when brought over. Here are pics of the carbefore it...

As title states. I only need the foglights themselves, I do not need the end caps, nor do I need a pigtail.Let me know what you have.Thanks,

So my galant has some very serious steering wheel shake when going over bumps. It is hugely noticeable when I go over a bump or road imperfection that only affects one side of the car, left or right. When this happens, the steering wheel moves violently in that direction. When it affects both...

I am logging with MMCD, and the timing advance values I am getting are confusing. First things first, I set the BISS and Base Timing as per VFAQ before logging.What should the TIMA value be at idle? My TIMA is showing -5 to 1 at idle in MMCD. Under part load it moves around and is much...

Selling an extra set of plug wires I have laying around. They are longer than USDM wires and are the ideal length for using with a cyclone intake with the standard coil pack mounting.$35 + ship.

I'm getting my exhaust done tommorow and the stock cat is coming out. However, there is an o2 (maybe a heat sensor?) post-cat that will have to be removed. What is the process for grounding it or whatever so that I don't trigger the dummy light for it once removed?Thanks

I'm trying to change my rear brake pads but I need some slack in the e-brake cable. What am I supposed to do? My e-brake is disengaged. Thanks

Sorry for asking this here, but I googled and couldn't find an answer.I have the ASA (JDM) rar files, but they are password protected. I can't remember the password unfortunately. It is from lilevo's site if that helps.Thanks

My jdm galant takes a 2-wire non-heated o2 sensor stock. The o2 sensor harness only has 2 connectors, where the replacement I bought a while back has 4. My solution to this was attaching the 2 wire plug from my old o2 sensor to the new, 4 wire o2 sensor, connecting only the necessary 2 wires...

I'm wondering if anyone knows the length/pitch of the TB screws off hand.These are the ones I'm talking about (marked in red). I'd like to replace them all with hardware from a fastener shop and not order from mitsu if possible.thanks

just went outside and snapped these. car is at stock height, street went from fine to several inches of water in minutes, water is almost in my exhaust.

Ok this is driving me crazy.I replaced the coil pack about 3 months ago as cyl 1 and 4 had no spark. The used coil pack I picked up worked fine up until about a month ago, when I started dropping cylinders 2 and 3 intermittently.Now when I try to start my car, most of the time it will only...

Okay I realize these are for the turbo. I just want to confirmI think 2 of them (larger ones) are for the water/cooling eyebolt on the turbo I think the other 2 of them are for the oil feed line, turbo eyeboltI am ordering new crush washers and just want to make sure as I don't...

I have a quick question about my headlightsBasically I have a jdm galant which has jdm headlights that are of the H4/H1 design. The h4's are supposed to turn on as low beam headlights. The highbeams are H4 on a higher setting plus the h1 bulbs.My problem is that one of my H4 bulbs does...

Looking for a mhi b16g turbo to replace my failing stock 16g. Please let me know what you have along with price, amount of shaft play, and approx kms on the turbo.Thanks

Hi guysOkay, my car wouldn't start today so I pulled the spark plugs one at a time to check for spark. Only cyls 2 and 3 have spark at the end of the plug wire.This leads me to believe that one coil on my coilpack is bad. However, before I go buy another coilpack, are there any other...

I've been having intermittent problems with my car bucking back and forth while driving at normal driving speed (40-60kph). It has happened to me twice in the last two week and is very noticeable. After fairly short, erratic bursts of power loss and car bucking it subsides and my car drives...

I'm trying to get my badly worn front right axle replaced on my vr4.I'm following this guide that i found on dsm tunersQuote:Method 2 Turn the steering wheel all the way to the side you are working on (this will pull the tie rod towards the center of the car). Remove the drive axle...

A few notes:My car is basically stock with a MBC, keydiver chip, and my ECU is jdm so unfortunately it doesn't show fuel trims. i just want to know if everything looks normal, I only did a short wot pull (around line 886).A couple quick questions:At the end of the log i idled for a...

Hello.I have a repair manual for galants but go figure, it isn't complete. I'd like the torque spec for the nut circled in red below. it the the nut connecting the power steering arm.thanks

Over the last 24 hours my car has been behaving very poorly.Yesterday when I arrived at work I noted a strange smell. I popped my hood and noticed that a bit of coolant was seeping out around the pressure cap as well as out where the t-stat gasket is. the temperature was fine. Didn't think too...

Ok, so as of late i've been unable to build any boost. So far i've:- Did a boost leak test and held 15psi just fine. - Compressor wheel spins freely, no in-out play, a tiny bit of up and down play. - I tried using a bike pump to test the wga, but it opened even under the slightest amount...

clickAnyone with $500 to blow?click

clicki'm sure one of you will be all over this. enjoy

clickperhaps someone here is interested. they go behind the door handles and protect it from getting scratched. pretty rare from what i understand.

i was filling up with gas yesterday and i accidentally knocked a clip off of some part of the gas door assembly. it is an S-shaped clip and one has some black on it. Now the gas door won't pop open. if someone has a pic (or details) as to where this clip is reinserted it would be much appreciated.