The Top Mitsubishi Galant VR-4 Resource

Join the best E39A 1991-1992 Mitsubishi Galant VR-4 community and document your GVR4 journey.

  • Software Upgraded - Reset Your Password to Login
    In order to log in after the forum software change, you need to reset your password. If you don't have access to the email address you used to register your GVR4.org account, you won't be able to reset your password. In that case, follow the instructions here to regain access to the forum.

Search results for query: *

  1. FS: 15 years of dsm/gvr4 accumulation ($1- $1800)

    Well i'm done.(Please read this entire post before you even think of contacting me!!!)I have been receiving a ton of text that have been very short with 2 or 3 words... Please, if you can't text complete sentences, DO NOT TEXT ME!All sales are cash and carry... I.e. I...
  2. Hello to all the recent NEW Memebers!

    Just wanted to say hello since I have been slacking in my usual contact P.M.'s for the new members. Also I wanted to remind everyone about the Picture Post that is in the General VR4 discussion forums.If you would, Please leave a picture of your VR4 in the post with the #(s)Thank you all...
  3. FS:1991 Eagle Talon FWD TURBO AUTO $600obo MI.

    I have a 1991 Eagle Talon that is in need of a new home. It has been sitting in a garage since i did the body work, but the roof is about to fall in on it. Id much rather sell it then to see the building destroy it.The body needs to be painted. I started this project about 6 years ago and...
  4. I know I have seen this VR4 before...

    Gas savers? click
  5. 4orced4door

    Purchased a laptop from him for my father, and I cant even fully convey my satisfaction with the whole process. Great to deal with! Awesome on the shipping and communications!Thank you Paul!BTW~ If there was already a good guys thread for 4orced4door, it wasnt in the first 500 post that I...
  6. Electrical plug repair

    I had this in the Technical post a while back, I just figured Id move it here to keep it.Just for fun, You can watch the BETA video I made here!The tools that you will need to start with are pretty simple. First you will need a few pick tools ....a pair of pliers, and a soldering iron...
  7. JDM fender lights: Measurments and How-to

    Ok, I am doing this for everyone that plans on putting a set of Teardrops on thier fenders.The first thing to do to prep your fender, is to cover the top with masking tape. Blue painters tape is good, but any will work for this procedure.I am starting by taking the measurments off...
  8. I think I am going to need more jack stands

    I just got back from driving for 15 Hours (well 12 driving, 3 loading/unloading) to pick up 1361 From Rausch. I dont have much to say other than THANK YOU to Aaron! The 3 hour B.S. secsion was well worth the drive!Here are a few pics from the trip, I will try to put a few more up later...
  9. Drive shaft carrier: My newest Mini fab project

    So I am going to be hauling an AWD eclipse this weekend and I couldn't find my old strap I made to hold the drive shaft up, so I made a new one. I actually like the way this one turned out. It makes the process very easy to do, and I would say is faster than tying a few pieces of rope to hold it...
  10. Shifter cable and bracket difference between VR4 and DSM

    I had posted this a while ago in another thread to show what to look for, but I thought I would start a seperate thread just for them so here it is.This is just to show the difference and similarities between GVR4's and DSM's with the difference pointed out about the missconception of the...
  11. Rusted Axle removal **Video**

    I made this today because after regarding the problem in another post, I just so happened to have to deal with a rusted axle! Speak of the devil and he will apear..Anyway, this is a run down on how I get the stuck unstuck!The Video link is at the bottom of the page.Here is a very rusted...
  12. FS: 92 Talon 4bolt 6 bolt Combo in Michigan: $900-SOLD!

    EDIT: SOLD-SOLD-SOLD SOLD I am just trying to get rid of a extras.This is a complete car, but it needs work. I rebuilt the head with new seals about 6 years ago. The motor only had a few hundred miles on it, and it starterd useing coolant so the head should probably be checked when it gets...
  13. Balance shafts: The reason to delete them

    I tore this motor down yesterday and would have to say that it is defenitly one of the worst ones that I have seen. This is definetly the main and best reason to remove balance shafts. Enjoy the carnage.
  14. Custom Fuel Tanks

    I just found this on a site I looked up for other reasons. Maybe someone needs one?Custom Cells
  15. Blown Mitsu MLS Head gasket

    Well after tearing the motor down today hopeing to find just a couple of melted pistons, I find out that I need to kick the machinest, and myself in the NUTZ. If you look at the pictures, you can see where the gasket lifted because of the dip in the cylinder wall that I did not notice until now...
  16. FS:SOLD 1990 Eagle Talon TSI AWD manual !!SOLD!! Michigan

    I just put this car together a couple weeks ago, and I need to sell it quickly. I am Asking $2200 obo.I bought the car around 8 years ago, and the motor had a bad timing job done on it. So I had picked up another car that was in an accident that had a good running motor in it. Basically I...
  17. Some more random Pics

    Some more files I just found on an old disk.
  18. Have lift, Will travel

    Well the tractor got sold a while ago, so I no longer have my mobile engine picker. Honestly, I figured I would have replaced the old tractor by now, but oh well. So I was trying to clean up the mess in the garage yesterday from a tear down from a wrecked car, and decided I needed another lift...
  19. 467

    Ward is one of the best sellers I have ever delt with. I would recomend anyone buying or dealing with him, you will be treated great!
  20. CMP exhaust, Muffler questions

    Ok, I need to gather some information from you guys.I am muffler shopping, and I need a nice muffler that last. I have been around to all the local muffler shops to pick their brains, but what I have comeup with is pretty dicouraging.I have done some research on flowmaster, flow-pro...
  21. Illuminated shif knob..Too much rice?

    I found this while rading an old mag. I kind of like it, even tho it is a little pricey.What do you think, too ricey?Bmp design shift knob
  22. Dual Guage pods

    Started a new project last night around midnight, and figured I would share. I need to do a final prep on them, then they'll be ready for paint. What do ya think?
  23. BOV mounting - Need more oppinions...

    Ok, so I stood in fron of my car tonite for about an hour maybe 2 trying to decide how I want to mount my BOV.First thing is practicallity and function. Obviously, I need to have it be able to be dumped back into the intake. (well, I want it to anyway)Second delema is, do I want to show off...
  24. ECU guru's please sign in at the front desk

    Ok, so my buddy has an ecu out of a 91 DSM that was in his newest purchase 986/1000. The guy that he got it from had said it had a remaned ecu that he bought through a local parts store. He took it out to throw into his eclipse, and the car ran fine, until he mounted the case and it grounded...
  25. 2 G maf mounting?

    Can a 2G maf be mounted in any position? I was thinking about running mine upside down, or maybe, on its side depending on what I do with the intake.
  26. Need help deciding on intake routing!?!

    Ok, so I have been building my I/C pipes for the last several days when I get the time anyway, and I am in a delima. I have been avoiding relocating the battery to the trunk because I just dont want to.I have been siezing batteries as well, and would like to just do a small battery, but after...
  27. Connector Plug repair How Too!! With Vid clip

    Hello. Today we are going to do a how too on repairing plug clips. You can watch the BETA video I made here! The tools that you will need to start with are pretty simple. First you will need a few pick tools ....a pair of pliers, and a soldering iron.You will notice in picture A ...
  28. Adjustable Arospeed cam gears questions HELP!?!

    I have a set of older Arospeed adjustable cam gears, well they dont line up!! I have tried setting them at several different angles to get the timing marks lined up, but no matter what I do, they are a 1/2 a tooth off. This is bewildering to me, I have done 40 or 50 t-belts over the years, but...
  29. BG adjustable coilovers

    Anybody know anything about them? I didnt see them in any discussions, so If you have some info, please let me know.Ebay LinkAnd...Discuss!
  30. Interesting and Usefull Information link

    I found this while searching some things earlier. Though some one might be able to benifit from it.click
  31. VR4 Pictures Post Here !!

    I am starting a VR4 picture post to put all of our cars up in one single post to make it easy to see all of them.It would be great If you wanted to post pics of your cars, No matter what they look like, with their #'s attached. And also, it would be great if this was preferabaly dedicated...
  32. Torque specs- Seriously getting P.O.'d

    For some reason, I can not find my other manual for the main cap torque specs, but the one states something like 14.5 flb's and then an additional 90deg turn. The other thing is the pattern. I looked through lillevo's pdf, but it dosent give the pattern or the spec.WTFI know that I am...
  33. Help, I need torque specs for Differential cap

    I have apart a 91 eclipse auto AWD trans, and am ready to put the diff back in, but do not have the torque specs for the differential cap bolts. Is there anyone that can come up with these? Please let me know what you find.
  34. Buscher Balancer belt size?

    Any one running the buscher 2 piece balancer?I need to get a belt, and know that the stock diameter is roughly 18 1/2" and the buscher is 17", so I should take the 1 1/2 difference, and divide it by 2 to come up with 3/4" shorter belt, but not positive. Maybe my brains not working because of...
  35. Making tools

    Who here makes their own specialty tools?I finally broke down and got tired of beating the balance shaft bearings in and out to do BSE's, so I made these. They are bearing press' for removing, and installing the balance shaft bearings. This way I can actually line up the oil holes on engines...
  36. How to Remove broken bolts With Welder

    There was a nice write up on the proper was to remove a broken Bolt with drills and easy outs.This is a method that I learned a long time ago and use Very often. Granted, this will not be able to be used by everyone, But I hope it will help some.This is a great way to remove rusted in bolt...
  37. Stronger valve springs Questions

    Ok.. I have been looking through post all day, but I can't come up with anything usefull. It might just be me.What I am looking for is a set of valve springs that would offer a higher springrate than stock. I am running a set of Street grind 546/547 web cams ( cam card ) with 3G lifters. The...
  38. Need help with part # search

    I have a set of perfect circle rings that I am not sure of what they fit. If anybody can help, I would greatly appreciate it!! I have spent a load of time looking these up, but must be doing something wrong. I can't find anyone that caries them.The part # is 41692 STD-010.
  39. I need a math check....

    Ok.. So I got everything back from the shop, But, I am still waiting on the OEM mitsu MLS head gasket which is supost to measure at 1.4mm (.056) which is .4mm (.016) thicker than stock OEM (1.0mm thick).From another thread that I had started about gasket thickness... click Here comes the...
  40. CAPS cd ?'s

    I just got my caps cd from iceman65910, but I can't get it to run on my computer. Any tricks to get it going?Thanks.
  41. Thick Head gasket, which and where ??

    I have been looking for a thicker mill headgasket. Anybody got any suggestion, prefferences? Which one would be the best to use.Thanks.
  42. Block Decking & Piston Limit values

    Does anybody have the values and limits on the piston side to side clearence, And also what is the max that I can have my block decked/ surfaced.I was doing inspection on the block today and found out that the guy that tore it down last, used a grinder to clean up the top of the block, and...
  43. Contradictive Pricks

    So I pulled the motor out of 1387 tonite and was checking all the tolerances. While I was refferencing my Mitsu manual, I came across two contradictions a page apart. One page says dont grind the main journals of the crank, the other says if the tolerances of the rod's are bad, have the crank...
  44. Modified DSM smic/ fmic (anybody ever run one?)

    Has anybody ever run one of the singles, or the modified dsm side mounts. The ones that are doubled, or trippled. I know Dejon use to make one, but I never really found any good info on the performance.The only reason that I ask, is because I have 7 or 8 of them laying around and was thinking...
  45. Project 1387 has begun!!

    I bought this car out of Kentuky about 2-3 months ago while I was working in Illinois and living in a hotel. When I got the car, it wasnt running because of a poor t-belt job. After digging into it and pulling the head off and all, I checked the oil pump, and it didn't want to turn.. So I put...
  46. 2G maf # 055

    I have a 2nd gen style MAF, but instead of the #609, it has #055. Any ideas what this one is from/for?Thanks.
  47. Oem "Heavy" Leather Shift Knob

    I just recived a Oem leather shif knob that is weighted. It is actually a dsm knob, so it is about 3/4" longer / Taller than ours, but that is what I use anyway with my 1g dsm shifter assembly. It locates the shifter nicely, not too short, not too tall.I was curious if anyone else was using...
  48. Buy of the century!! (well... of my week) (( I'm Gloating!))

    Ok , so I was surfing e-bay last week and I came across an ecu for sale. The title said: "ECU 1992 Mitsubishi Galant AWD Turbo Remanufactured" So I clicked on the link and it was described as follows:"1992 MITSUBISHI GALANT AWD TURBO REMANUFACTURED ECU FROM PYTHON INDUSTRIES. BRAND NEW...
Support Vendors who Support the GVR-4 Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications RixRacing RockAuto RTM Racing STM Tuned
Top