For Sale: 1993 Eagle Talon, 5 Speed AWD Black Exterior, Grey Cloth Interior, No Sunroof Clean Kansas Title In My Name Originally a Texas Car, So No Rust Underneath It Sat Outside Before I Bought It, So It Needs Paint And Has A Few Dings- Exterior: 6/10, Clean Interior Though Power Steering...

Looking for a set of Engine Lifting Brackets for a 1G or GVR-4.The 3 Point Black Brace that goes between the Throttle Body and the CAS.The Silver Bracket that mounts to the Exhaust Manifold Flange and the Timing Belt Side Motor Mount Bracket.I'm also looking for the "J" Shaped Green...

Borbet Type C Wheels 5X120Got a set of Borbet Type C Wheels I bought off a guy in KC awhile ago.When I bought them, they were advertised as 5X100 but it turns out they're actually 5X120. I can't use them on my VW Golf without using adapters as the bolt pattern is different.Turns out...

AEM EVO 9 Series 1 EMSI have a Series 1 EVO 9 AEM Engine Management System (PN: 30-1320) I got in a Parts Stash, with a 2G Mitsubishi Eclipse Turbo that I bought recently.The previous owner mistakenly thought that this EMS could be adapted to work with a 2G like the Evolution 8 AEM EMS, so...

Looking for a 1G AWD DSM Fuel Level Sending Unit. Either the Sender itself, or the whole pump assembly....I'm flexible. This is going on a 93 Talon, so no GVR-4 units. I know some of you guys mess with DSM's so I'm hoping someone has one they're willing to sell. Thanks.

Got some 1G and 2G DSM stuff for sale. Figure some of this can be used on GVR-4's as well. Cleaning out the garage and could use the cash. Prefer pickup if local, otherwise buyer pays shipping and any PayPal fees. Feel free to message me with any questions, offers or snide remarks. Located...

The new owner of my old car would like to put the 4WS setup back into 521/1K. Thanks to a member on here, he's got the majority of what he needs, but is still missing the front steering rack and a set of intact 4WS steering lines. The buyer is located in New York and willing to pay for...

Got the last of my things left from my GVR-4/DSM days. It's not much, but it's all listed below, so feel free to make offers, ask questions etc.I don't really visit that much anymore, so shoot me a PM and I'll get back to you. I'll try to pop in here at least once a day, but PM would...

Looking for a good condition used EVO 8 leather shift knob. Let me know if you have one available and price. Thanks.

Hey, I can't believe I'm really doing this, but I think it's time to let the Galant go. Between work and life in general, I don't have the time to either work on the car, or even drive it at all anymore. At this point it's a garage ornament, and I could use the money and space at this...

If you're looking for a good little daily driver, that you can tinker with then you might want to consider this car. It's an older TDI, which means less emissions BS, more fuel efficient than the newer models and the easiest to work on. This is not one of the models currently under scrutiny by...

Cleaning out some stuff around the garage, and found some items I don’t really want or need , so it’s for sale. Prefer a local buyer, but I will ship at buyer’s expense, unless otherwise noted. You've seen my Goodguy thread, and all that gushing praise still applies. If you want to use...

Cleaning out some stuff around the garage, and found some items I don’t really want or need , so it’s for sale. Prefer a local buyer, but I will ship at buyer’s expense, unless otherwise noted. You've seen my Goodguy thread, and all that gushing praise still applies. If you want to use...

I have a HKS Throttle body elbow for sale. Asking $50 shipped for it in CONUS. If interested, feel free to PM me. Thanks.

Got a few more things for sale or trade. If I have to ship, buyer pays shipping. CONUS only.1. Moroso 6 Bolt Aluminum Oil Pan- Part # -20960- Picked this up today and decided I really don't need this for whats supposed to be just a street car. The pan is used (obviously) and has a few...

Got some parts for sale. All parts are OBO, except for the smoked taillights. I'll set them on fire and dance in the flames, before I let them go for a penny less. Buyer pays shipping, unless otherwise stated. CONUS only, unless you're really cool and I know you from on here or something. Then...

Bought a used 1G DSM AWD Fuel Level Unit from Sal, and would definitely deal with him again. Good communication, and item is as advertised. He even held the part for me while I waited for Paypal to finish transferring money from my bank account. Thanks Sal!

Looking for a good condition fuel hanger setup for a 1G AWD, preferably with the stock hard line and fitting coming off the housing, intact. My 90 Eclipse GSX project has a dead pump and a rusted up fuel hanger with a hard line fitting that's completely stuck together with the soft feed line...

Looking for a good condition 91 rear garnish panel. This is the black plastic panel that bolts to the trunk in between the taillights. Mine is in decent shape, except for a large crack radiating out from under the license plate. If you've got one or a really clean set of 91 Taillights, lemme...

I searched and couldn't find anything. Looking for the dimensions for the stock US market intercooler, so I can source a similar sized oil cooler to install in the space. If anyone has one lying around, and doesn't mind measuring it, it'd be appreciated. Also, does anyone think that I would...

Recently decided to pull off the smoked 91 tails on my car, and reinstall the stock taillights until I can source a good set of 91 GVR-4 lights. I love the way they look, but I must be getting old or something. All I can think about when I'm driving the car is if the jackwagon behind me can see...

Got some stuff I'm looking to get rid of. Most of it's for either a GVR-4 or a 1G DSM, however there is some 2G stuff lurking about in there. Feel free to PM me with any offers or questions. However I reserve the right to publicly ridicule anything that's way too off the wall or just flat...

Owner: Ed Dobrzyn Message Board Name: BluFalcon Year: 1992 Number: 521/1000 Color: Kensington GreyI originally picked this car up to be a daily driver a few years back. (No, seriously..) At the time, I had a 90 Talon TSi/AWD that I had built up pretty nicely, but wanted something...

Looking for a good set of 95-96 Eclipse headlights. Prefer OEM or OEM style lights. If you've got a pair, lemme know. Thanks.

Wasn't exactly sure where to put this, since it isn't GVR-4 related, but I figured someone on here has practical experience with this and it can be applied to GVR-4 bumper covers as well.I have a set of 97-98 Talon front/rear bumper covers I'd like to get repainted, but need some advice on...

Looking for a complete set of 2Ga Talon sideskirts and door cladding. Paint condition doesn't matter as they're gonna get re-painted, but no cracked or torn pieces. Thanks.

I just picked up a 97 Spyder to use as a daily driver. The car had some issues, one of them being a flaky driver's side rear window that was having a hard time going up and jumping the track occasionally. It would faithfully wobble its way back into the up position until one day when it got...

Looking to pick up one of the old Buschur fuel pressure regulators that mounted directly to the fuel rail. If you have one or know of one that's availalbe. let me know. Thanks.

I know that the common location to mount auxiliary gauges is either on the A-Pillar, steering column, in a speaker pod, dash vents or under the radio. I have a double DIN headunit installed in the car, so I can't mount them under the radio. I'd like to keep any gauges installed in that general...

I have a set of<b> basically brand new</b> TSW Nurburgring wheels and Sumitomo tires for sale. I bought these to clear a 3KGT VR-4 brake setup (which they do), but decided to go with a set of Baers instead. My old SSR wheels clear the Baers, so I think I’d like to sell these wheels. I like...

Great seller, stuff arrived safely and as described. Good to go!

I just recently installed a FP3052 and their exhaust manifold in my car. I'm concerned about underhood temps, as any heatshield for this setup would have to be custom made. I know my alternator isn't happy about having a giant heatsink of an O2 housing right next to it, and I would like to...

I recently installed aftermarket brakes on my Galant, and pulled the original setup off. Everything is included for a bolt on install, to include: Pair Of GVR4 Dual Piston Calipers, Mounting Brackets, Hardware, Aftermarket Brake Pads (Either Porterfield R4S or Hawk HPS, I forgot what I installed...

I just installed a FP3052 into my car, which means that parts from my old setup is for sale. I also went ahead and added the parts from a previous FS ad to consolidate the whole mess. If you have any questions, feel free to PM me. <b>Prices include shipping within CONUS.</b> Not really...

I'm thinking it might be a nice subtle change from either the stocker or EVO wings everyone seems bent on installing onto the cars. If there is someone out there making one, I'd appreciate any info.

I have a pair of remanufactured 1G 3000GT VR-4 brake calipers, steel mount brackets, brand new Porterfield R-4S pads, with new slide pins, clips and shim plates for sale. I was going to run this setup on my car, but decided to go a different route with the brake setup. So this is all for sale...

I recently installed a set of Ground Controls on my car, and don't need these anymore. GVR-4 specific H&R Lowering Springs. I cut about 3/4 out of the dead coils in the rear to try and alleviate the rake in the rear with the AGX's I had installed at the time. Take a look at the picture at the...

SSR Competitions: $1200 OBO Size: 17x7.5 Bolt Pattern: 5X114.3 Hubcentric Rings: DSM/Mitsubishi Hub Offset: +42 Color: Gunmetal Grey with Machined Lip Tires: Falken Azenis 225/45/17I have no idea what the going rate for a set of these wheels is these days. Some searching revealed a...

Finally got around to installing some suspension stuff that I've had lying around for awhile now. Car is primarily a weekend car that gets driven on the street and might go to the track once in awhile. I went with new Koni 1G DSM inserts in AGX housings, along with Ground Control sleeves and...

Mitsubishi Owner's Day 2011, Irving, TXI'll be there tomorrow with the GVR-4 "hard parking" it in the "Classics" section.

Piecing together the last bits I need to install the calipers on my car. I got my brackets from a buddy, who got them from someone else, which means that the mounting hardware for them is long gone. I've found some 8.8 bolts in the appropriate size, but have access to grade 10.9 bolts as well...

About 7 months ago, I had a lot of work done to my car. Poly Rear Subframe Bushings, Energy Suspension Bushing Kit installed, 5 Lug Swap w/ functional ABS, LSD 4 Bolt, Rear Wheel Steering Delete, Active Toe Elimination, and new wheel bearings on all 4 corners.While on the highway, driving...

Hey, I bought a set of rebuilt calipers locally, but didn't get the mounting hardware for the pads. Specifically I'm looking for the following parts:MR389607-Front Caliper Clip Set (Contains the following parts: x2 Left/x2 Right Spacer FR Brake: No Part Number, x4 Spring FR Brake Pads...

Got this from a JDM front cut a few years back. I have a horn cover for a OEM GVR4 steering wheel with the MMC logo on it. Asking $40 shipped.Thanks.

I recently picked up a new daily driver and need to sell my truck. I bought it off the lot as a dealer demo model with 2K miles on it. I've used it as my daily driver since Nov 2006, and it's a very comfortable, well equipped and reliable vehicle. It has a 4.7L V8, automatic 5 speed and towing...

I've got a question about the long mouldings on the roof of our cars. Are they supposed to be colored black or body colored? I've seen some pics of white GVR4's with them painted black, but most of the other cars I've seen them are body colored. I've got a KG car and want it to stay as...

I recently got around to installing my JDM bumpers on the car, along with my JDM hood. I had some money squirreled away for a decent paint job and bodywork so I dropped it off with a buddy who works at a dealership bodyshop. He's been working on it off and on as a side project and sent me...

Hey, I'm getting my car repainted and need to find the part number for the 3 Diamond Mitsu logo badge that goes along with the JDM MMC badge.I know you can get the right one from Options Auto Salon, but I can order it cheaper directly from the dealer with a shop discount. I did some poking...

I have a set of Drag DR-17 Wheels, dark gray with a polished lip. As you can see in the pics, the wheels are in great shape with no bends or major damage. One wheel has very minor scratches and another has a minor blemish in the lip. They're a dead ringer for the 5Zigen FNO1R-C's. Wheels have a...

I'm looking to see if there might be some interest in my car. I love the car and would hate to see it go, but I need to move out of the house I'm renting by mid August, and I'm not sure where I'm going to end up. Either in another house with roommates or by myself in an apartment. I think I'd...