Hello. I'm confused about this and looking for answers. ALL lights work except for the switchable green and orange lights. I swapped in two other clusters, same problem. Gotta be car side. I studied the wiring diagrams, but they're a bit hard to read. It appears that the boost "gauge" lights are...

Switched to SD. Comes with pigtail. $50+shipping

Switched to 3g maf. Need to clear space. Few bent combs, shown in pic. $40+shipping

Hey guys, I'm trying to get my galant on the road again (for the 3rd time) and besides my massive oil burning issue I found some damage in my head. It looks like I absolutely disintegrated a rocker and damaged my cam, retainer, and lifter. I believe the valve is fine but will inspect it when...

Hello, hopefully looking for the whole assembly. Just the housing and the foglight switch would work, or just the foglight switch itself. Don't really need rheostat just housing, figured I'd buy it all as an assembly so I have a spare. Regardless, would love to get the housing and/or foglight switch

Hoping for $500+shipping but open to offers as I'm not sure what's fair. I can get a brand new cable for you for an additional $90edit: SOLD FOR $500+pp and ship

broke my 1-2 shift rail end, right on the bottom lug used to shift into first. Hoping to find a new one but can't. Gonna use one out of my spare trans that has 280k on it but need to replace that. Thanks. Code is NPXV

I have two broken GVR4 trans. One broke a while ago shifting hard into 3rd gear. Got stuck in 3rd gear. Newer trans broke after spinning all four wheels on an ice patch in 1st gear. I drove it to a parking spot after spinning it and a couple hours later when I tried to drive away it wouldn't...

I've read some mixed reviews on the S90 throttle body. My throttle body seals are all smoked and i'm pretty sure its the source of my idle issues. I wanna rebuild it with TMZ which is $140. I can get an S90 for only a little more on extremepsi. Should I go for the S90? Not only does it cost more...

This is the Build Thread for 1384/2000. Reply below.

Hey guys, just got the car running after skipping timing and destroying valves and guides for the second time. The car runs great but smokes like a motherf****r. It smokes instantly on startup and constantly the entire time the car's running. Always smoking like crazy. Not many miles on it but...

Not sure what dash number. Had engine and complete drivetrain and they crushed it before I heard about it. Kinda sad

Hey, I checked out our service manual's electrical book and I think I figured it out but I wanted a few other opinions before I tried anything. Our dashes come with a blank switch next to the defroster button, and I wanted to wire up a cutout muffler into my car. I had an idea to kinda hide it...

looking for one of thesemine is held in with duct tape! rheostat falls out and I want to experiment with foglight switch

Hey, so I'm just a little confused. Everything I've read on this forum and the dsmtuners.com forum say that fuel system, turbo, front mount, exhaust, ecu (dsmlink), intake filter, and supporting stuff like gauges, clutch, and safety will get you about 300-400hp with a tune. Is this information...

Hey guys, got 1384 rebuilt completely and tuned, ran great, blew an intercooler hose, it sat for a couple weeks, and now it no longer starts.After blowing the hose i taped it up in order to get home, so it still ran after that. It cranks but it just continuously turns over, barely any pops...

I know what you're thinking. I have a boost leak, you're gonna say. BUT I DONT. I tested and it's holding 20psi just fine. The problem is very weird because it is running rough on idle, runs fine at cruising speed, but bogs like i blew an intake pipe when I floor it and the turbo is spooling...

title. Just got the car running after a year and a half, good bit of rush work, so I need to clean it all up, which i'm sure will help fix this problembut I installed a 3G eclipse maf, DSMLink v3, 1000c FIC injectors, and a 255lph walbro now. Any of those could cause this I feel so I'm...

Lets go boys!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Sorry if this post is obnoxious but I am indescribably excited.Not last August, but the one before that (almost to the day actually), I bought #1384 from some dude in a mall parking lot, not knowing jack about cars.It lasted...

Hey guys, so kinda a weird problem... I finished putting the car together and when I turn the key I can hear the pump and the injectors (until they were primed), and I can hear the starter try to do something... but whatever that is, it's not start the car. It kinda sounds like the starter when...

Hey, I'm trying to upgrade all of my intercooler piping to 2.5 inch, but I don't want to use reducers on the TB elbow or the turbo outlet. It's easy enough to find aftermarket TB elbows, but I cant find a 2.5 inch turbo outlet. Anybody know where to get one?If not, how should I run my piping...

I love multiple owner cars. I was wiring up my WB today into Pin 4 on our ECUs, trying to make use of ECMLink's narrowband sim feature, and found this:I feel like I need to fix this, but I'm not quite sure whats going on here. Kinda looks like they stuck a few grounds together in one condom...

My parking brake doesn't do anything, really. It hasn't worked since I got the car. It jiggles up and down but no mechanisms actually engage, and I'm scared to force it up higher. Do I just need to replace my cables to get my parking brake to work? Other threads I've read are pointing me towards...

hey 1384 is missing foglights, if anyone has any available that are in somewhat good condition I'd like to buy them from you. Thanksalso need radio brackets but I may be able to macgyver my own if nobody has any.

I get DSM's are old, but a very popular tuner in my area told me that he finds DSMLink "too limited and archaic" and told me if I got a high quality ecm like "Link" that he'd be happy to help. Is DSMLink limited? Did I waste $600 on this when I should have gotten a standalone? I can find another...

Hello guys, it took me a while, but I finally figured out the issue with my old rings. Block was bored out by .50mm sometime in its existence, hence the non-fitting factory rings.The issue now is finding oversized piston rings. I can find ring/piston combos and rings for 2g's but not for our...

Hey, so I'm in the process of rebuilding my engine and I ordered these piston rings. They say they're for our car, but after putting them in my cylinders, I realized the gaps are absolutely massive.New ring on the right, old ring on the left. As you can see, the ring on the right has a giant...

clickAre these real? The forum's consensus seems to be get NPR rings. Just want to verify this is legit and that I can trust them before I order

Hey guys, so when I took my block + girdle + arp studs to the machine shop, not only did they question my girdle, they said that I probably wouldn't need an align hone. ARP and Kiggly both say an align hone is required for either of their products. Shop said they used a dialbore gauge after...

Hey guys, I finally got my block and head back from the machineshop. Took them 5 months but they seem to have done good work and I'm stoked to start getting it all back together, I just have a few questions first.My valves contacted my pistons, bending all intakes, which warranted this...

Hey guys, I installed all my poly bushings, but it turns out one of my control arms is bent around where the balljoint goes and I can't get the new bj installed. I bought a new control arm but removing the bushing from the bent one without damaging it(the bushing) seems to be nearly impossible...

While I was trying to take my inner tie rods off of a rack that isn't in the car, I bent the hard power steering lines that are attached to the rack and go to the rear. I took it to a hose shop to get soft line replacements made, but they couldn't find a fitting similar to the side with an O...

Hey guys, long time no see. I'm starting this thread to be in the general section rather than newbies section.In December, my timing slipped and bent all of my intake valves, and life plus the fact that I'm completely broke stopped me from fixing her up. Well... until now, that is.In...

Basically title. What radiator is this? and does anybody know where I can get one, if possible?

New timing covers cost a lot and I'm trying to reduce total price. Any used cover in semi-good condition would be great

hey guys, I'm building/rebuilding my engine right now and I've done a bunch of research, but i'm worried i may have missed something. I want a green light from you guys before I order anything so I don't get it wrong. Could you tell me what you think?The goal for the build is to be a street...

My car had some holes drilled into the top of its headlight housings with some wires and this tiny light wrapped in a green condom. They were right next to the actual headlight. Anybody know what this is? I'm assuming it's related to the underglow I found underneath the car.Sorry for the...

Hey, I'm beginning the process of tearing the engine down and rebuilding it. I already have it out and on a stand and partially disassembled, but before I attempt to get it all machined and put back together, is there anything in specific I should know?I read something somewhere about certain...

Hey guys, about a week ago my car died about 10 minutes after bringing it to redline. I pushed it home and tried to figure out what happenedI popped the valve cover off to see if it had to do with the valves, even though my timing belt was fine, and I found all my intake rockers had fallen...

Hey guys, so I'm starting to think 1384 didn't have a sunroof from the factory. It has the non-sunroof dome lights in the front and back, non-sunroof mirror, and non-sunroof sun visors. The sunroof controls aren't in the factory location (front dome lights) and are just a small panel of buttons...

Hey, so 1384 has electrical issues. Sunroof, front dome lights, and gauge cluster lights dont work and never have worked (during my ownership.). I removed the cluster and inspected all the traces, screws, and bulbs, but everything looks good. A tiny bit of corrosion on the big red screw in the...

I'm the fourth owner and I have no clue what I'm doing. Let's go.Previous owner gave me some bits and bobs including a different shifter. It has the same base and same throw but a shorter lever. It's a factory looking shifter, I believe it's from some other 1g DSM. Anyway, I scrubbed the...