Yes they do. I was actually wrong, not ALL lights work except for the G/O's. The left and right HVAC dial backlights don't work, but the center does. I can test power to pin 11 soon.

Hello. I'm confused about this and looking for answers. ALL lights work except for the switchable green and orange lights. I swapped in two other clusters, same problem. Gotta be car side. I studied the wiring diagrams, but they're a bit hard to read. It appears that the boost "gauge" lights are...

Weird how mid-August can turn into mid-December in the blink of an eye. I finally got the assembled longblock into the car yesterday.

Wow, that's insane. Mine is a 93.The galant vr4 did not have active aero. I would love to purchase one of your active aero units, and if you have one for sale, the transmission for the 3k if its a lower mileage unit. My phone number is 208-699-9801, text me if you don't want me to hog your...

Willing to sell that front active aero for the 3000gt vr4? Mine needs it! (please say yes)

We got a good deal on it for it being rust free. You should turn that 6-8 months into 6-8 weeks :devil:. Stoked to help you build it :rock:

Been a while but I finally got my engine back from a local-ish shop, Gibson Performance in Spokane, WA. Total of about $4300 with the forged internals. Wiseco 1400HD's and Eagle rods. Hopefully it'll stay together this time.Hopefully buying some FP2x cams from @mitsuturbo and then I just...

Drop it off at a rust repair shop and be ready to pay thousands

what was it?

Forgive my ignorance, but how is this intercooler any better? It looks nearly identical to the ETS

Sent it out. Thank you!edit: deleted the image of the receipt because it contains your name and address. I thought this all was a dm. Lol

They want $20 to ship the whole set. $16 for just the hoses. I'll separate if you want to save the $4. My PayPal is @EliDribben

Dirty though. Will need a clean inside and out

No rot at all.

Switched to SD. Comes with pigtail. $50+shipping

Switched to 3g maf. Need to clear space. Few bent combs, shown in pic. $40+shipping

Fresh gas?

Price range?

I would like to buy the tachometers and the steering column trim. What is your paypal?

https://www.driveshaftparts.com/index.php?route=product/product&path=444&product_id=4117stolen from nicholas cesca's thread

Slugs, the disc and pressure plate(and everything that comes in a clutch kit) are the same for all 4g63t's. The differences are in the flywheels, awd ring gears are smaller than fwd. Sorry for derailing, just wanted to clear that up

Amazing deal. Worth driving any distance to buy if you have the money. GLWS

No disrespect but high prices only hurt the community.

Thanks for explaining the v brace. I'm not in a good enough place to support another car right now but as soon as I can, I'll try to find one. It's good to know about the parts pricing, I almost bought a 1st gen a while ago but backed out. And on an unrelated note, I'd also like to import a...

Car will start with the clutch switch unplugged^headlights only come on with ignition on. I've killed my battery a few times by shutting the car off but not the running lights because the headlights turn off automatically.

Love the updates. I'm fiending for a 1st gen Montero, hopefully I can get one some day soon. Also, what does the rear v-brace do and why did you decide cut it out?

I'll be by my storage building to check in the next few days

I think I do. I removed mine to install some 2.5inch.

thank you for updating us all. I'm very glad it works

This problem can be caused by an improperly functioning clutch system, whether it be not fully bled or a bent clutch fork or what have you. If your clutch isn't fully disengaging then you'll have a hell of a time getting into first. Does the car go into first when it's not running?Make sure...

Today I got the engine torn down. I was very wrong with my post yesterday.This bearing tried spinning ^the right bearing is impregnated with metal and that groove looks like the grand canyon in real life^To prevent a fourth catastrophic engine failure I will be letting the professional...

For those unindoctrinated, you can read the horrors this car has suffered by my hand here. Since then, I pulled the engine out again yesterday. Oil is full of metal dust and there are significantly large flakes that got picked up by a magnet. Today I will tear it down and inspect bearings and...

My experience is heavily limited and, similar to any car guy, very anecdotal. But my car had nearly identical issues to yours, bad smoking on decel, idle, etc. This was on a 0 mile rebuild, though. I have still not exactly figured out the issue but I am heavily leaning towards something in the...

Sorry if this is considered a necro-post, but I decided it was worth doing anyway. This is my (almost) three-year update.After putting in the transmission from Shane, it lasted 10 days before my balance shaft belt disintegrated and caused my intake cam gear to slip a few teeth, causing them to...

Good luck, let us know.

Well, I don't remember what that bung on the manifold goes to and my car is apart so I can't find out, but you could always just remove the T and connect the one line directly to it. From factory that bung only has one hose coming off of it, that line might just go to something that isn't used...

Can you explain what you are searching for about timing? I think I may be able to help. As for the unhooked vacuum line, that could definitely be affecting your idle. Could you post the clearest pictures possible showing where each end of the line currently is?

Welcome! You can quite easily check for vacuum leaks yourself if you feel capable. A boost leak tester and a bottle of soapy water should be able to sort it all out for you. If you don't find anything and the issue persists, it could likely be a tune or possibly something more major like timing...

I remember struggling with this on my rebuild. I ended up ordering 3 sets of bearings and only one worked. I couldn't figure out the part number I needed so I called King Engine Bearings, the manufacturer of the most widely recommended bearing for our platform, but they made an error and gave me...

I've done it both ways. I've had good luck doing trans separately. After putting the engine in, benching the trans up isn't extremely difficult. Just make sure you align that clutch well so you don't have to redo it after struggling to put the trans in for a while. Definitely not speaking from...

looks like this guy has one

Here's a write-up thread I dug up for you, it's called the ECS pod. I suppose that stands for Electronically Controlled Suspension, as Iceman said. It looks to be some sort of control/monitor unit. Pretty nifty. The only problem is availability. Definitely a hard to find piece...

You are genuinely evil. How dare you suggest I run a 2g head on my 1g? I have scoured the dsmtuners forum and now I am questioning many things. It seems the consensus of reputable people (notably Kiggly himself) that 2g heads are superior due to their higher casting quality and more...

Hey guys, I'm trying to get my galant on the road again (for the 3rd time) and besides my massive oil burning issue I found some damage in my head. It looks like I absolutely disintegrated a rocker and damaged my cam, retainer, and lifter. I believe the valve is fine but will inspect it when...

Also, performance partout has just about everything you need.

@pot might be able to sell you what you actually need

Are we talking about the classic FP cast manifold? If we are, I'm sorry but this just doesn't sound right to me. Many vehicles have proven to run extremely well with a big 16g and fp manifold. I have read on some forums that changing away from the FP manifold helps spool on LARGER turbos as it...

The lazy way to do it would weld some covers over the front axle outputs on the tranny, put some CV axle ends in the front hubs, and weld the center diff. Then you're RWD. But you're gonna break stuff. You could get a super-built tcase that'll hold the power but who knows how the rest of the...

@pot Got anything for him?

Hello, hopefully looking for the whole assembly. Just the housing and the foglight switch would work, or just the foglight switch itself. Don't really need rheostat just housing, figured I'd buy it all as an assembly so I have a spare. Regardless, would love to get the housing and/or foglight switch