Anyone check on the car recently? My rear bumper has rotted away and I would like to find a replacement. If this one is still present and not suffering from rust itself, I might need to take a trip.

Thanks. I need to redo my subframe and was debating spending ~350 to have it sandblasted and powdercoated or just doing it what you did. It looks good.

What did you use to refinish the subframe? Looks really good.

I pulled all the aftermarket audio out of my car and have been looking at returning it to stock-ish, and I thought I'd use this thread to post some more information about the stock radios.First up, this was the base radio for the VR-4 and the one that came in my car. MB541074Next...

Thanks, appreciate it. Let me know, I found a source for the brackets, though I haven't pulled the trigger yet. I also have the double din trim originally from my car, but mine also has 1 broken tab (and one bent tab).

Looking for the following items as I'm working on restoring my car and "unpimping" the auto.Stock Radio Brackets Double Din Radio trim (seem to have broken the tabs on my stock one Dash speaker - I know these suck, but maybe you've got a good condition one laying around. I poked a hole in...

Got my two badges today after placing an order last week.I am not sure if I was the only one who was unsure of the material, even after reading the description. Just so everyone knows, the original badges are plastic, but these replicas are made of metal and are nice and heavy and solid...

FYI, it came in today. Condition was good. I plugged it in and attached a jumper pack to the car. Cassette, AM/FM all work great. Illumination is a yellow-ish green, though so it doesn't quite match the car. Doing a little more digging and it might actually be from a Diamante.EDIT...

Haven't gotten it yet. Should come tomorrow. Will have to figure out how to power it on to test it, but based on the color of the printing on the face, it should be green.

As far as I know, the only radio with the amp was the '91 CD player unit. The big double din tape deck units didn't have the amp, and those are the ones I think could be shared across '91 and '92.So I take it you are looking for the '92 CD player unit? I found a source for the top tape deck...

Hey, which 1992 radio are you looking for?I think the base 2 radios are the same as 91, with the base being a Double Din Tape Deck with the mid-grade being a Double Din Tape Deck with Equalizer. The top is a separate single din tape deck with an accompanying single din CD player. As far as...

Got all my fittings in. I ended up going with Fasster LLC fittings that I got from eBay. I got a -6an female fitting and a -6an 90deg elbow and some of their PTFE nylon wrapped stainless tubing. I also got a Vibrant Performance 5/16" tube to -6 AN male fitting.The Fasster stuff actually...

Thanks for all the advice! I'm not trying to upgrade my line size for now, just trying to get the f#%$ing flexible hose off the hard line and the fuel hat.Based on what I've read, now I'm thinking about just re-using my existing hard-line since it seems to be ok good shape, cutting the...

Mainly due to effort. There are pre-made kits ready to go, and many just go that route.But not opposed to it either. If I go hard-line, which one do you recommend?

Thanks. I did do some rough measurements, and I think I need just over 10 ft of line, which is what has been so frustrating. I can't get anyone on the phone from STM, and I think their kit price is pretty decent as it includes the fuel filter. However, I am about ready to go another way.

I am working on getting my Galant back on the road after being in storage for 8 years.I am currently working on getting the fuel pump out, and have decided that the fuel lines are so rusted that I should just replace the lines with -6AN lines.I'm looking at STM Tuned's kit: click which...

Keyless/Alarm system sold. Still have the seatbelt buckles.

Just curious. Are all the VR-4 radios plug and play, even if the car came stock with the base radio?Answering my own question - The only radio that's not plug-and-play is the CD player combo from the 91 VR4. That one requires an amp in the trunk.

Sorry to threadjack, but I had posted some keyless entry systems for sale with flip keys if anyone is interested. Different style than the ones in this thread though. And only one set of them have the Mitsu logos.click

I've got a set of Curtis' EVO Seat brackets, as seen in this thread: clickNever installed or used.Last time a set was for sale, it sold for $150 shipped. I'll get it out of storage this week if you are interested. Let me know!

All parts have been claimed. Thanks!

I am temporarily relocating and would like to get some junk out of my storage unit so I can get some other stuff stored in there.I have the following parts available for free pickup or for the cost of shipping.- Stock Intake Manifold - Stock Cams and cam gears (pretty rusty at this point...

'93 Headlight HID project is sold.Still have the '91-92 headlights. Open to offers!

Yes, it's all still for sale.

This is an in-progress HID headlight project. It all works, however for it to be perfect, you'll need to fabricate a decorative shroud to cover the HID bits, and weather seal the hole cut in the back of the headlights.This project was created using a pair of 1993 clear headlights, 2 Acura TSX...

I know most people aren't familiar with my username, but I've been on the forum for a long time. Unfortunately, in the past years, my car has been neglected, and I've acquired too much stuff for it, so it's time to get rid of stuff I'll never get around to using. This post will be updated as I...

Still have this. Any offers?

I've known KC for a long time now and have myself bought a few ThinkPads from him. I would not hesitate to buy from him and avoid eBay!

Willing to entertain reasonable offers as well. Thanks!

Both are sold. Thanks!

Bottom grill has been sold. Top grill still available!

I am trying to downsize some of my parts and I came across these two Galant grills. Both are '92 style grills and could use some touch-up work.One is stock, except for some red-paint I was trying out (I was young!). This is more of a normal gloss black color.The other grill is modified...

Hey everyone! Still have this. Let me know if interested.

I guess you probably have what you need, but I also have a set of stock front and rear springs here in DC.

Thanks for the information Charles. I'll look into it your battery tray a bit more, but I guess I was picturing relocating mine to where the stock airbox is. I have to look into what you have... I've been out of the game for awhile.

Thanks for looking.I'm looking for something that works with the Oddyssey batteries. I think the JMF one is too small for those.

I'm getting back into my VR4 after it's been sitting for the last 5 years, and I'm refocusing my goals for the car.I'm looking to see if anyone has a Blinging Battery Tray. I'm looking to bring my battery back under the hood.Let me know!

Magazines are sold. Sorry for the shipping delay, they will go out tomorrow in the mail.

I've got one person who PMed me yesterday. If I don't get payment from the today, they are yours.

Lightly used Dewalt 1/2" Cordless Impact/Torque Wrench. Works great for taking lug nuts off and other stuck nuts and bolts. This tool has the hog-ring anvil.20V LED Light Drive Size: ½" Anvil Type: Hog Ring No Load Speed: 0-1,500 rpm Impacts/Min: 0-2,300 ipm Max Torque: 4,800 in-lbs...

I have the following issues of Turbo & High-Tech Performance magazine that featured the Galant VR-4 as part of a "Doug's Dyno-Cell" series, where they started with a stock VR4 and dyno'ed the car after each upgrade they did.I have: December 2001 (Part 1), January 2002 (Part 2), June 2002 (Part...

Cool. Send me a PM and I'll give you my paypal.

Bump... Anyone looking for a roof rack who wants to make an offer?

Cool. PM me and we can figure something out.

Visor is sold! Wheel sold on eBay.OEM Mitsubishi Sunroof Deflector - $30+shipping SOLDOEM Mitsubishi wind deflector for the moonroof. Includes all mounting hardware.ONE Enkei RPF1 wheel in Gold - $125+shipping - SOLD Size is 17x8, bolt pattern is 5x114.3, offset is 45, bore...

Hello all,I am slowly going through all my Galant stuff and selling off the things I don't need anymore.I currently have the following:Black Powdercoated DSM Valve Cover - $150+shippingThis was professionally refinished with a black powdercoating, but I never got around to...

Bump!

Hey KC, PM sent!

Would anyone be interested in this, or is it something I should just toss? I really need to make some room and clear out my extra stuff.