I finally sold 1667/2000 last week after 13 yrs. it went to a friend who had a couple more. It’s been fun..I will be selling stock seats in a week or so as soon as I clean them up. Their in great shape just been sitting in basement over 10 yrs. I hate to trash them. Pm if intrested. Vman911

Just wanted to check in...Its been awhile on my end... I'm going through a nice divorce right now so far 6 months into it and going no where fast.As soon as it is over I will be listing 1667/2000 for sale again. I have to get my 18 yr kid a car. He was the last one to drive 1667 on new...

has anyone rewired thier fuel pump? does it bypass MPI relay? I think I have seen a post on this but cant find it.. Thanks Vman

Selling all my toys... for a new car and teeth. just sold my 02 ford ranger. next is cbr then my vr41995 CBR 900RR almost mint condition. Will be a collectors Item one day. Couple little rock chips from riding it but nothing major. I'm the 3rd owner of this awesome machine. Sits in my...

just finished it..looks badass.. 75.00.. I think 25.00 will cover shipping. so 100. total It has EGR Plate on it already.

I have had these in a box for couple years now. I have no need for them. Meth tank, meth pump, boost switch, 1 way check valve. nozzle w/2 g elbow. I dont remember what size nozzle is.boost switch and valve came from cooling mist.com. All I want is the price of switch and valve and...

just powdercoat an xtra t-sat housing.Gloss black. asking 45.00 shippedI can do any metal part that will fit into oven...email [email protected] in gloss black coming soon.other colors I got are matt silver, red, gloss black, satin black, chevy orange, neon green

Sad my car didn't sell for 6500. Thought that was a fair asking price...Oh well...I'll try again in 10 years..Since I'm keeping it I picked up a used trans and xcase for less then 350. Trans felt gritty so I opened it up and cleaned out crap and dead roach. I found viscus coupler cracked...

I need a viscous coupler in good shape. Located in trans behind the top cover. Held in with a snap ring.

gonna throw these out. Ill give them a week or so. I have no need for them. I got 2 of 1 side and 1 of the other.. I already have another set going with my car for future buyer.All I ask is pay shipping may be up to 30.00 these are not light.

May not sell yet.. Someone coming to look at car next week and I'm gonna give him first crack at manuels.Thier FACTORY MANUELS 1989-1991 in great shape. even has a huge 1991 wiring diagram..I may sell all 3 for 75.00 plus 15.00 shippping..let me know if any intrest.thanks for looking Vinman

AWD ECU with galant chip. Socket and caps done. MD166262 Asking 140.00 10.00 shipping

4 seals for sale. All 7.00 each plus 5.00 shippingbuy all 4 @ 25.00 5.00 shippingMD719710 transmission axle seal (forgot which side). MD707184 Rear diff side axle seal MR983368 Xcase front Seal MB393929 Rear Diff front sealspecify which ones you want so I can erase them as they...

slightly used fuel filter with AN fitting and 3 90 degree 6 AN fittings. comes with bracket. only 2K on filter.$15.00 plus 8 shipping

I got lifters I need to get rid of...23-3G lifters 40.00 8 shipping16-2G lifters 20.00 8 shipping

One of my center vents is cracked. Looking for a good set of center vents. Thanks...vinman

looking for a 91-94 AWD transmission in good shape hopefully close to me..let me know what ya got..thanks

looking for a nice 91 AWD trans close to Atlanta.. Thanks

I got a ROERACING meth kit. Pretty much brand new. I painted the pump black so it couldn't be seen and mounted it on subframe (where evap canister was). I wired most of it, bought a 1-way check valve and boost pressure sensor (coolingmist.com) And never finished it up. Its been hanging out in my...

Pay for shipping +5.00 and you can have them. I got 4 bolt ones with a LSD diff now and I have no need for these...Who wants them?

Finally after a month wait thier back in stock.. Just so happens they match my rims..Can't wait to install them.

I turned on my air for the first time in a long time the other day. I noticed it wasn't blowing very well and BM was humming. I took it out and found awhole bunch of pink insulation in it.Any idea's where it came from?I did do my evap last year when I decided to get air working...

Is anyone coming to this event this sunday in Atlanta?

We had a dyno day on sat. 35.00 for 3 pulls. I took out 1667 to see what its at. Just a Basic tune and 23lbs of boost on pump gas. It put down 325 AWHP. I was hoping for 350ish. Time to finish up my meth install and get it tuned when funds become avaible. 2,600 miles on motor, FP Green turbo...

Here's the Photo Shoot of 1667/2000 last month.. Enjoy pics. View as slide show.click

I just put on new driver side mount..Just need to clean up PS bracket now.. Curtis want to borrow it? I know you can make these..LOL

Engine Mods: 6 Bolt block (bored .40) Wiseco Pistons (9:1:0 comp) Eagle rods ARP Mains & Head Studs 272 Cams (Regrinds)...

I need the left and right side upper support brackets. Thier on the inside of the bumper to keep it from sagging on the sides. Anyone got a set? Tried mitsu and thier discontinued. I may hit up pull a part on sunday. Thanks VinmanThier Called Front Bumper side reforcement brackets. #1 on...

Brand new, never installed. I got it to fix my fan issues and come to find out my resistor was broken and not allowing my fan to come on until it was over 210 degrees. Fixed my problem with new resistor and I have no need for this controller. It comes with radiator probe and everything you...

Finally after owning 1667 for 3 yrs, I got the A/C to work. I tried a rebuilt compressor (off ebay) and new dryer. Needless to say wasted about 6 cans of r-12. then tried R134. Wasted more of that. My pressures were ok, compressor kicks on, but still no flow. Installed new dryer 3 more cans of...

1992 Galant VR4. 885/1000 is up for sale. 176K on body. 2,200 on motor. $5,800 link to pics: clickEngine: 4G63 Stroker, 2.3L, bored at 85.5 mm Stock 100 mm crank (4G64) MAHLE forged pistons 8.8:1 comp. #MIT130366I23 MANLEY H Beam rods, #14021-4 ACL race bearings (Main & Rod) ARP...

for those of you who have switched to R134 did you change your expansion valve to a stock one (r12) or did you find a r134 valve that fits? if it got change where did you find it at. did dash have to come out to do it? thanks Vinman

looking for the front ABS sensors off a 91 VR4. Thanks Vinman

Do you guys think non turbo galant ABS sensors will work in a VR4? I need to find a set of front sensors. Thanks Vinman

Seeing if there might be intrest in my ride. I hate to part with it but I'm thinking about a new ride. Asking 7K. Its a very clean and nice VR4.Car has 126K. 450 miles so far with new motor. 4wheel Steering still intact. Cruise works, Needs tunning. DSM Link V3 included with car.Engine...

I have been having this issue with my car for 8 months now. I can't seem to figure it out. I know its something stupid. It did it on my last motor and I rebuilt a pimp motor this time and I got 300 miles on it and still same problem.I can be cruzing along say in 4th (any gaer) Push in the...

I purchased the radiator off ebay for a 89-92 GVR4 and it didn't really fit right. First thing I did was cut off the 1/8" of rubber on the Bottom holes to drop it down a little. Then I had to move the holes over toward driver side a 1/4". The top brackets I had to elongate the holes to fit cause...

Selling my 20G. Its setup for Externial wastegate. (flapper welded) It has 8K since rebuild. Little up and down and barely any in and out play. Great turbo, upgraded to a bigger one. 2" outlet and 2 3/8" inlet. polished housing with some scratches. does not come with lines or fittings. S.S o2...

So I'm not happy with this 7Bolt Evo8 piston combo. Its never been right since a piston got destroyed in it. I bit the Bullet and ordered all NEW parts for my 6 Bolt Build. I'll post pics as it gets assembled. So far I got The Block built, Wesico 9.0:1 and Eagle rods. I Pulled the 7 bolt out...

I got a nice evo3 GT manifold in great shape. It has egt hole also. Asking 100 plus 15 for shipping.

Barley used set of front Cross Drilled and slotted rotors. Hawk Hps Pads. About 300 miles then I got 3000GT brakes. Asking 125. plus 15.00 shipping. 1 rotor had little rust but I removed most of it. No lip on the edges. 95% of pad left. 4 lug pattern. Great stock up grade. Vinman

Well most of you know I destroyed my 1st gear at track 4 weeks ago. I decided to pull motor and re-ring it Since the pistons were used from a friend. (Evo8 pistons) In the process I installed new rings, new head and fresh paint. Rebuild a 93 tranny with a Evo3 HD Input shaft, Evo3 first gear...

Well I stripped 1st gear out at showdown yesterday. Dropped clutch at 5200 RPM and 20lbs of boost. Stock tranny didn't like it. Shot a tooth out of caseing.

Its been sitting on jackstands for 3 weeks. Installed new tranny and xcase. Its ready for GADSM Import Showdown next Sunday.

I got one side done. Need to replace wheel bearing on other side. Looks good with the 12.5" rotors. I had to space out 5/8" to clear the rims.

I'm about to imbark on the task of switiching the indsides of my 3 bolt to a 4 bolt. I want to keep my 4Wh steering. I'm pretty sure the yoke seal is the same. Are the axle seals different? If so does anyone have the part# for the 2 axle seals for a 4 bolt? Thanks Vinman

Went out to Import Showdown 09 Hosted by GADSM today. It was Held at Silver Dollar Raceway by Macon, Ga. First time at track and I take home 1st place in AWD Class. No racers showed up for finals so I raced alone. I made it to quaterfinals and the next fastest car was a Evo8 running 13.5's. I...

A friend got me a set of 3000 gt vr4 calipers. I glass beaded them, Used gloss caliper paint and some green for a little accent.

So I just finally got my orignal window sticker in the mail the other day. I had to car over a yr and previous owner mailed it to me when he found it.How many of you got your sticker?

Put my new Intake on this weekend. Runs real good. 272 Cams coming soon.