Have not received parts yet, nor a reply to my PM about them. Does anyone have any contact info for the seller?Edit: I paid around the time the .org was down, Jan 19, could be a PM issue?

PM sent for Amber Turn signals

I need one of the 90 degree brackets that mounts to the rear caliper that the parking brake cable slides into.Thank you, Nicholas

Run the wires through the defogger vent?

Love the Enkei wheels

Did you ever replace the transmission? If the Eagles were an exact copy of the ggsx, the trans final drive and thus rear did are different than dsm and gvr4 ratio.

Radio brackets still available. Shipping to 53186 Thanks, Nick

I need the bracket which mounts the shift cables to the transmission.Thank you, Nicholas

I went with factory DSM alignment specs for the same setup on my Talon. Interested to see what anyone may have to say.

I better way to do this would be to run a line off of that tee to the sensor that is mounted somewhere. This will not only eliminate the weight from the brass tee, but also shield the sensor from vibrations. I have heard of autometer sensors having a short life in some cases where they are...

The brake lines may be double the price but as far as ease to work with they are well worth it. Minor missbends are easily straightened by rolling it on a flat surface. One thing to be careful with however is because they bend much easier than steel, if you accidentally bump a nice straight...

Bit of light reading for you click stroker and destroker basics

100mm

Hopefully this is everything you need click

Yes, EGR switches vacuum from one port to another EVAP is an open or closed, lets pressure through or not.

PM sent for single din and chrome '89 grill

Quoting Chi271: Wish I could upload a picture for you guys... But my buddy gave me a set of rain guards that he got new on eBay for $25, for his 92 accord sedan. He sold the car, and gave these to me considering he thought it looked so much lime an accord lol. Well never the less the fronts fit...

Looks good, different from the common bumpers. Something to keep in mind fwiw if you really want the best ducting to your heat exchangers.

Quoting zeek13: hey guys I'm curious to know what oil y'all runHere is a thread that has a lot of good information on different oils click

Advantage of using the 9012 bulb over the 9005 bulb is: 9005 bulb: Wattage: 65, Lumens: 1700 9012 bulb: Wattage: 55, Lumens: 1870 So you are still using a 55W bulb in the low beam circuit, but achieving a greater light output.Below are some pictures I snapped while sitting in the car at my...

That was a concern on mine. I removed the HID bulbs that were in the car when I bought it. Obviously this reduced the glare huge. When aiming the headlights I didn't notice much glare. I have ask a couple friends who I have driven behind if they noticed glare in the rear view or side view...

9012 bulb, still 55w power consumption, greater lumins output. I have used all sorts of bulbs expensive bulbs, including trying 9005 in the 9006 place. The 9012 is by far the best bulb I have ever used. I highly recommend it.click

Looking for both front inner fender splash sheilds. Available?

click7 dollars shipped on ebay. 5 green bulb covers for size 74 bulbs.

Haven't tried on a GVR4 so I'm not positive on the sizing, but I used two hockey pucks for the rear mount on my 1g automatic dsm, from what I could tell digging my fingernail into it the puck is softer than poly, but much more stiff than oem.

Any chance either inner fender splash sheilds survived?

Looking for the left front fender lower splash shield

Looking for the left front inner fender splash sheild, the one that protects the belts/harmonic balancer.Thank you, Nicholas

I ran into this with my Galant gsx, I'm fairly sure it was part a6609 that worked for me.

Overall excellent transaction. Pot was quick to respond to PM and shipped the part the next a day as he said he would.

PM sent

Power antenna?

Is the alternator puttibg out the proper voltage and amperage?

Found one. Thanks Thedsmguy

I'm looking for the closed throttle switch that screws into the throttle body. I had to steal the one if my DSM for the time being. Shipping is to 53207.Thanks, Nick

That looks exactly like the flywheel on my '90 GGSX.

I have not heard anything back from him either.

No. The issues he had were from the slotted hole allowing the bolt to move on hard corners. This is not an issue with the spacers, as you can see they have a step on them. The smaller diameter portion takes up the space in the larger diameter strut holes. The larger diameter part is what acts as...

Problem with washers is the evo shocks have larger mounting holes than the Galant.so you can drill out your steering knuckles and use evo bolts. Or get these I mentioned. When i first put the evo suspension on my dsm i hacked up the dsm ears to use as spacers, eyeballed what looked like 0...

How does your ECU smell? Had the same issues with mine when my ecu was going bad

Supercar-engineering. Com sells the spacers you are asking about. I was going to link you to them but can't get it to pull up on my phone right now.Funny. My GGSX has the original dealership's sticker on the same place on the trunk lid. Haven't removed it because I'm sure there will be a...

Much of the concern with the balance shaft comes from the fact that it spins at twice the speed of the engine. So when guys are constantly talking the engine to near red line rpms the balance shaft is spinning at twice that speed, making it more likely to fail and get tangled in the timing belt...

Happen to have a right rear parking brake cable?

Has anyone used the Competition Clutch Steel Flywheel from JNZ? clickMade from 4140 steel. Weight is similar to the RRE "No Name"

click

Looks to be in alright shape from what can be seen in the picture. Looking forward to a build thread. What do you have planned for the rebuild?

JIC comes in both 45 degrees and 37 degrees flare. -AN is basically 37 degree JIC, but tighter machining tolerance. As long as the JIC you are using is 37 degrees you can use it with -AN no problem. If I was you I would take the fitting into a hydraulic shop, If what you are working with isn't...

Excellent, I will give that a shot, thanks.

I should have been more specific, this is on my GGSX. The valve cover that is on there now is the same as G posted. Mitsubishi without the diamonds. The valve cover color (as well as the DSMs I've owned) has always looked to me like a slightly different silver than most rattle can silver colors...

PM sent