^That's right Dave, they were jdm lightsAre you just hooking up the high beams in the jdms or are you putting in totally different headlights?

Without the axle cups it's not even close to being worth $400. You packed a rear dif w/axles in a potato chip box, it's not the shipping co. fault the box ripped- you just chose some flimsy box to send 70lbs worth of parts. And for the record I didn't ask you to sell the parts for $250. I...

Haha- thanks Hertz, glad someone noticed my good looks. And I only bought a wrx because I can't afford an evo yet!! Good luck w/the car man.

Well I just got the 4 bolt and w/o the axle cups I specifically asked about. So I didn't get scammed but it took two and a half months for him to ship and the box had 2 huge gaping holes in it upon delivery. If you deal with this guy I would suggest only doing a local pick up unless you have...

I have had such good luck w/people on this board that I ended up trusting in someone who obviously doesn't deserve it. Gage has had my money for a month and a half now and hasn't shipped the 4 bolt I paid him for. This is the 4 bolt that is going on Hertz's new car that I'm selling him #77...

Quote: If you did you would have pleanty of help and tools!haha...that's for sure!

If anyone is interested in the car as a whole and doesn't want to fix the clutch, I could have the act clutch replaced with a good stocker and have the better drive shaft installed at the same time. If nobody is interested in the car as a whole I will have to part it out, which I really don't...

The car is no longer pending sale due to a clutch problem and buyer backing out. The problem has been narrowed down to either the pressure plate or the clutch fork. The hydrolic system is fine. Basically the clutch won't disengage fully and if you're interested in the car I would recommend...

Sale pending to Tarzan!!

^^Sent you an email

Thanks guys, I appreciate the compliments. It isn't sold just yet, but I have a guy who is very interested.

Quote: Could you pleae PM me back a phone #? or Post it here? I am very interested. Willing to come pick up.-WillSure, I pm'ed it to you once but I guess you didn't get it. I'll send it over again.

I'll take some as soon as I can when it stops raining here, no problem.

Aspod- sorry, not going to the swap meet.ktmrider- it has a sunroof, the ac is functional, and I still have the cruise control items.I know it's priced a bit low, I just want it to sell sooner than later.

I have ejoyed and appreciated this car a great deal, but I feel it's time to take a slightly new direction and try my hand at evo ownership. I feel that $4,000 is a fair price for the car given everything that comes with it and everything has been done correctly, no hack jobs here. So hear...

Thanks to everyone that showed interest in the car, but Hertz is going to be the new owner.Congrats man, you're going to love the car!!

Here are a few pics from 3rdstrike's previous for sale thread:

The car has no engine or transmission, it's being sold as a rolling chasis. It has brakes, I'm just tyring to keep the price a bit lower by offering it without them or with them. The stealth calipers/rotors/pads/adapter kit are all pretty new (100 or so miles), and $300 is a smoking deal for...

Quote: looks mint. are you parting it out, er selling it flat out?I'm selling it flat out at $2500.

Up for sale is an absolutely mint roller, #77/2000. The body is perfect, not one ding on the whole car. Zero rust. This car was originally from Texas and it has been stored for the winters since residing in Illinois. The paint is STI black, which has a green/goldflake to it that you only...

Wow Gary the wheels look great man. That's cool you decided to go with the original finish and really keep them period correct. That must have taken a lot of powerballin'.

I painted my 89 underdash with duplicolor's vinyl and fabric spray paint and it's looking just fine 2 years later now. I couln't find a great match for the interior color so I ended up using black and I think it's fine. It's one of the panels that are usually in the shadows anyway so the fact...

Is that from a galant? Just asking because I'm pretty sure the amg galants had wood steering wheels.

Yes I'm using an n/a water pipe and the mounting tab needed to be drilled out a bit to match the bolt hole on the block.

I've been boosting 20-25psi just on a big 16g, but 3rdstrikedsm owned the block before me and it saw around that much psi on a pte scm6152.

You can do it, that's the setup I'm currently running.Damn, I type too slow- my block is a 7 bolt.

I had this issue last summer and it was the sending unit. I opened up the little "box" above the flotation assembly and found the metal tab that is supposed to touch the coiled wire beside it was not touching and all I had to do was bend it down a bit to so it would make contact. Works...

^+1

I tried uploading a pic but it wasn't working for me...Anyway check page 196 in the B&E manual, it shows the exact location.

Another good guy post from me to gaylantvr4- bought a black top cas from him and got it in 2 days.Thanks again man.

The evo rods won't work on a 6-bolt because they're not wide enough at the crank end. That's why I had my rods machined to fit the wrist pins, I had a full evo piston/rod set and had to ditch the rods in favor of the 1g rods.

Awesome seller! Got my amber corners from him in 3 days.Would do business w/again- thanks man!

Looking good...Those rear floormats w/the car's number are the hotness!!

Great seller! He responded to my wtb post and got my injectors to me very fast.I'd do business w/him again in a heartbeat- thanks again man!

Good guy to deal with. I bought his old hood and it is a HUGE improvement over my old one. Thanks Nate, and good luck with your drag car man.-Scott

Just got a drivers side dogleg from John. Very easy to deal with, good communicator, and quick shipping.Thanks again.

Looks like a GREAT find.Car is extremely clean and sounds like it has a very solid foundation to build on.Congrats!

Bought a set of wheels/tires from dc style and all in all he's a good guy. Good communication and shipped in a timely manner. Thanks again!

Great seller, fast shipping and good communication- thanks!

Great guy to deal with. Super quick payment and good communication- thanks Besso!

Bought a manifold heat shield from him and it was shipped quickly and he even cleaned it up before sending it, great seller!

GW has been a great guy to deal with.I've bought a couple of parts from him and he has treated me more than fair and I would do business w/him again and again. He's a terrific member of this board.Thanks again- Scott

I'm not sure if the evo wrist pins are exactly the same size as the 2g's, but I took my evo pistons and wrist pins along w/my 1g rods to a machine shop and they bored out the rods to fit the wrist pins without a problem.

Great hassle-free guy to deal with. Bought Jay's forgeline rims and they are going to be awesome! Quick shipping too.

Good guy. He's been very patient and easy to talk to about me getting him parts.

Good guy- paid right away and very easy to deal with!

good guy- easy to deal with and paid right away!

VERY NICE!!!

^^That's great to hear. I now know what mod I'm doing next......after my new galant gets back on the road......espelir springs! (already have the evo suspension)

So the espelir springs by themselves lowered and leveled everything out? I was thinking about getting those springs, but I was a little worried they would leave the front end a bit higher still. I'm also using the GVR4 tops in front, are you doing the same? That ride height is sick!