Just wanted to follow up on this thread. So I wound up getting the Volksmetalcraft Active Toe Eliminator Kit. Installed them myself and I was able to bring the car back into alignment. I adjusted one side too much in the wrong direction. But this was not the "best" way to fix this, I believe...

That's cool someone ran into my GVR4 in front of my house and their insurance wanted total mine too. These cars are worthless to the insurance company. They supposedly did $5000 worth of damage to my car. I even showed them several car ads and they wouldn't budge. I pleaded with them told...

How is the ride quality with these? I have the feal coilovers and the ride is too harsh it bottoms out too much. =/

Yeah they're really nice but really pricey. They'll save a lot of weight!

Quoting raptorWagon: Which trailing arms? Dsm/gvr4 and 3000gt stuff are very different. The 3kgt arms will widen the rear tracking.I think my car does indeed have 3000GT trailing arms because the previous owner mentioned that the rear track of the car is wider so he actually had the rear...

Sorry I never replied. I wound up ordered the ATE kit from Volks Metalcraft and waiting for them to arrive. I inspected the trailing arm again and I can't see an obvious damage. Paul at VMC said I can get 3-4x more adjustment with the ATE kit so I'm hoping that will be enough.Quoting...

I don't have the 4WS anymore, the previous owner took it out. This car is a franken DSM, I'm sure it has an eclipse crossmember because I just installed it and trailing arms from an Eclipse or 3000GT, A 4 Bolt LSD, and ingalls camber control arm.

My GVR4 got hit in the driverside rear a couple months ago. The wheel got pushed into the body so I replaced the crossmember. I could tell I have too much toe in after I put everything back and got a wheel alignment done the other day confirms there is about 0.5" of excessive toe in. The...

Just like title states need a Rear Crossmember for my GVR4 will take 1G DSM AWD crossmember [email protected]

Wow HKS treasure! External wastegate but dumps back into the exhaust! T4 must have a lot of lag though.

I just did some rear brake work and it's a little tricky to get in there. If you took the cable out just make sure the cable put back on right there's a notch where the kinda bar end sits on that. I accidentally just let the bar rest in the bracket the wrong way.The clip just slides over...

hmm yeah I might do that like you said there's nothing wrong with it yet. From what I hear if it's not doing any clicking it should be ok. I had a bad experience with a MR2 axle I was changing the boot on, the balls fell out of it and it was a major pain in the ass to put back together, but...

Whoa that's nice! I suppose if I really wanted one I can get one of those ebay covers and put an HKS sticker on it.

Is possible to just buy a whole rebuilt caliper for the rear? I bought one for the front when I had a stuck piston.

So I was working on the suspension on 1373 and I noticed the inboard cv boot is wet with grease, I didn't find a hole but it must be coming from somewhere but not really bad.My car is kind of a frankenstein car, the previous owner installed 3000GT suspension to do the 5 lug conversion so...

Dang it's like a twin of my car and it's right next door to me (San Jose). But like you I don't want another money pit. Maybe all the black cars are cursed, because I feel like mine is.

Is that Mitsubishi spark plug cover for sale?

Do they fit a 91 headlight? or is the 93 different?

Nice =)

Wow like stock version of my car

Still lookin

Selling my 1976 Datsun 280Z with a 1982 280ZX L28ET turbo engine installed. It is a the 2 seater version with a 280ZX 5-speed transmission installed. I hate to sell this car but I got too many cars, not enough space, and time to work on it. I'm hoping I can find a good home for it. I am unsure...

I agree. I think probably the biggest reason for the cause of the cracked fuel filler hoses is because these cars were built when there was no ethanol in the gas. So they're not as resistant to drying up as modern cars.

I am having the same problem the previous owner took out damn near everything besides the switch. They even took the evaporator out and plugged the fire wall. If they went to the trouble to take that out I don't know why they couldn't remove the condenser its still there.

Yeah I was thinking of getting a stainless steel coupler pipe and a 90 degree filler hose I would think that would do the trick. It's a 2" hose right?My car is ticking time bomb right now

I think I am unlucky because JNZ tuning posted that 8/14/2017 the part is no longer available. I just tried to order one from Hayward Mitsubishi also and they said they were all gone also. =( If I can't find one I will have to make one I suppose

Mine cracked where it connects to the tank and I got it holding with rescue tape atm. If anyone gots one new or used, preferably new I'll take it.Shoot me an email if you got one: [email protected]

Would you happen to have: Fuel filler hose (hose that connects from next to tank) Rear Caliper guide pin boots sway endlink bushings

Quoting iceman69510: Mitsubishi should buy this back for their museum.That's exactly what I was thinking like Indiana Jone's says "IT BELONGS IN A MUSEUM"

Yeah the previous owners have been doing some goofy stuff to this car =(

Just a followup to this topic. I finally got around to installing A gvr4 speedo gear that I got. When I took the current one out it had a 29tooth gear and the gvr4 one I had had a 30tooth gear. Swapped them out and now my speedo is off by +12 now so it made it worse. I guess I should have...

Ok thanks, someone had a GVR4 one so I've acquired one so far.

Just what the title says I'm looking for the speedo gear drive for a GVR4 and a 1G Eclipse to correct my speedometer.If you have one that you would part with email me at: [email protected]

Wow that's old school Tomy, I have the newers ones that are just in a box.

Cool I guess the search for a 1G Speedo gear drive begins thanks =)

Hmm that maybe the problem are the GVR4 and 1G DSM speedo gears interchangeable?

Ahh I forgot about the tire sizeIt has EVO8 wheels with 245/40/17sI put in the sizes with the stock 195/60/15s in the tire calculator and it says they're the same size though maybe reports 1mph faster.Maybe if I change to a taller profile tire like a 45 it will read closer to what it...

My GVR4 reports +10mph higher than actual speed. I found it strange how my car says I'm going like 70mph and cars are passing me so I checked it with a GPS one day and found out it 10mph higher. Does anyone know the cause for this and is there a way I can adjust it like get a different speedo...

I managed to acquire one. I actually got one of those also and you are correct it is too large. You could probably mount it on the center section but it'll cover your badge. If you want a brand new never installed dual gauge pillar mount, I have one I'm not using anymore needs to be trimmed still

Sorry I didn't reply to some of you, I'm still looking.

Still lookin...

If you got one or not where I can get one let me know. I don't check my PMs often here so please email me [email protected]

Would they happen to be the 1991 versions?Quoting blacksheep: I have 2 of these I found cleaning out my garage, new in bag. If anyone is interested!