The Top Mitsubishi Galant VR-4 Resource

Join the best E39A 1991-1992 Mitsubishi Galant VR-4 community and document your GVR4 journey.

  • Software Upgraded - Reset Your Password to Login
    In order to log in after the forum software change, you need to reset your password. If you don't have access to the email address you used to register your GVR4.org account, you won't be able to reset your password. In that case, follow the instructions here to regain access to the forum.

Search results for query: *

  • Users: CP
  • Content: Threads
  • Order by date
  1. FS: 1G clutch master cyl, engine resistor, ignition module

    1G clutch master cyl, new, $70 shipped.Engine resistor, used, pn MD172146, best offerIgnition module, used, pn J722T, best offerEmail me if you're interested: cypeake at hotmail dot com
  2. FS: Palm IIIc Data Logger - $40 shipped

    I used this logger for 4 years in my old GVR4. It needs mmcd re-loaded onto it but otherwise is ready to serve your logging needs. Comes with the original box, a bunch of manuals, cradle charger, several USB cables and a custom velcro mount that slides into the center vent area. You'll need...
  3. FS: Clutch master cyl, batt box, Palm logger cord,

    Found some stuff while cleaning the garage and thought someone here may need some of these parts. Everything is new except the logger cord. All are best REASONABLE offer plus shipping. Tire kickers offering $1 for this and $2 for that won't get a reply. Paypal only.1G Clutch Master...
  4. FS: Brand new Mitsu 1G clutch master cylinder

    With the larger reservoir. I just found it while cleaning the garage today. $100 shipped. Pics available upon request.
  5. FS: SOLD 91 GVR4; 1788/2000; Two-tone Norfolk, MA $6200

    The time has come to pass my Galant VR4 along to somebody else who has the heart to care for it. My focus this year is to finally do some door to door racing in the SCCA. I recently found a tow vehicle, which has replaced the GVR4 as my daily driver. The wife wants her garage space back, so...
  6. Plug wire sequence w/ coilpack?

    I can't find the diagram in the FSM. Can anyone point me to a diagram (or the appropriate section in the FSM) that shows which plug wire goes to which port on the stock coilpack? Or go out and look and describe it to me. The location of the wires is obvious based on their lengths, but I'm not...
  7. Prep work prior to painting?

    What's the best "home" method for prepping a part prior to painting? I've got a front lip that's painted and clearcoated, but it's in rough shape and I'd like to repaint it. It's plastic and is off the car. Obviously I'll use primer, paint and then clearcoat. But I'd like to know how I...
  8. Front fender removal

    I've got a new hood release cable and it appears that I need to remove the fender to run it through a hole in the firewall into the cabin. Does anyone have a diagram that shows where every bolt is that holds the left front fender on the car?
  9. Fuel sender feed line thread size? (AN fitting)

    My car began gushing fuel from somewhere above the tank yesterday. It began with longer than usual cranking time to start the engine several days ago. I thought it may be due to the colder weather. Then I noticed a puddle beneath the fuel tank this morning. GreatI got a look at the top of...
  10. Front/rear motor mount replacement

    Is there some sort of procedure for positioning the center bolt for new front and rear motor mounts (I didn't refer to the FSM)? I replaced both today with OEM units. I slightly jacked up the motor for both and then tightened the center bolt of each. Should I have allowed the motor to rest...
  11. One step closer to selling it.

    I got home yesterday barely able to shift the car into gear.for some reason, I've had to screw the clutch rod into the master cylinder about a turn every month for the last few months. The engagement point keeps getting closer to the floor. No leaky slave boot, not much weep from the rubber...
  12. What's an alternator going bad sound like?

    Something has begun making a loud noise on startup. It only happens for 2 seconds, and sounds like a bad caster wheel on a grocery cart. It doesn't dissipate, but stops altogether after the first few seconds of a cold startup. Is it the alternator getting ready to take a dump, or something...
  13. Clutch switch

    Which switch is the clutch switch )the one that disables the starter)? I want to duct tape it closed so I don't have to push the clutch in while attempting to start the car. This will just cause my TOB to wear prematurely. This is a common mod for Miatas, and I've already installed a $7...
  14. HELP! Factory alarm won't shut off...and fuel pump issues.

    I was packing up my car at the track this afternoon, and somehow set off the factory alarm. I can't figure out how to turn it off now. I pulled the two connectors to the horn on the firewall. Then I heard some clicking. So I pulled the plug to the relay just below that horn. However there's...
  15. AC delete How-To?

    I've decided that for the 5-6 times per summer that I actually use my AC, that I can stand to lose it. I figure all my GOOD AC parts should go to one of you guys in the south or midwest that actually need them for 6 months straight.I'm hoping that losing the condenser will free up more...
  16. Do NA cars knock?

    Or is it a turbo-only thing? I was just wondering about tuning a non-turbo vehicle.
  17. ETS FMIC install + JDM bumper bracket problems

    Grrr...this project is beginning to try my patience. I'll do a complete writeup later, but right now I need some help with figuring out how the hell to use the JDM front bumper brackets.I'm in the process of installing the ETS front mount intercooler.My current issue is trying to figure...
  18. Brode FMIC + JDM bumper info needed

    Who has this setup and what mounting issues did you have, if any? I seem to recall something about relocating the mounting tabs for the intercooler, but couldn't find the info after a search. Will I have to cut my radiator support? I'm hoping that my oil cooler will fit between the...
  19. Alignment specs

    I just discovered my spring 2006 alignment specifications in a pile of papers in the garage:BeforeLF/RF: Camber -1.94* -1.08* Caster 2.16* 1.87* Toe -0.31in -0.34inTotal Toe -0.66in Steer Ahead 0.03*LR/RR: Camber -1.20 -0.52* Toe 0.33in -0.02inTotal...
  20. Catchcan hose routing revisited

    I've got a catchcan mounted on the firewall below the injector resistor pack. Currently I'm running a functioning PCV valve which has the hose feeding into the catchcan. My valve cover breather elbow is hooked up to a small cone filter. So I've only got one line running into the catchcan, and...
  21. Which fitting to use for AC re-charge/re-fill?

    The one up by the radiator, or the one back by the brake master cyl?
  22. Connecting AN hose fittings to stainless braided hose

    I did a bunch of this last weekend while installing an external oil cooler, so I thought I'd post my thoughts.Cutting the braided hose:Measure the length you want and mark with a Sharpie. Cover that mark (remember where it is) with a piece of duct tape just long enought to wrap around the...
  23. Took some ECU comparison pics and have questions

    I borrowed a 1G ECU a few weeks ago, thinking that my idle issue was ECU related. Turns out it's not. But I noticed a few things while they were side by side. Mine's on the left.Notice the silver metal bar on the left side of both, that runs north/south. It looks like the portion...
  24. Let's see some interior pics

    That hole under the radio has since been filled with the flip-door pocket.
  25. JDM fog wiring and other questions for those who own

    I'm on the fence about whether to pick up the projector fogs, to replace my orange blinker fogs. What are projector people using for a switch, location, wiring? What type of bulbs will I need? Without the orange blinkers in my existing JDM fog housings, will my 2-bulb corners be enough for...
  26. Doing carrier bearing install right now...have questions

    I've started with the replacement of the carrier bearings and u-joints.The OLD rear carrier bearing has the hole in it plugged. The front one does not, nor do the two new ones.Am I supposed to block those holes with silicone, or leave them open?I took all the c-clips...
  27. Tranny rebuild: TRE or Shep?

    I've come to find out that the tranny I removed last November was stock, and had been rebuilt by some shop down in FL about a year ago. Maybe this was the reason for the ticking first gear.Anyway, I'd like to send it out for a quality rebuild this summer (and some synchros). The car is a...
Support Vendors who Support the GVR-4 Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications RixRacing RockAuto RTM Racing STM Tuned
Top