Well I've been looking for a roof rack so I can mount a carrier on it but no luck. So has anyone found another one that would fit our cars? If not I'll just get a tow hitch but rather have a roof rack though.

I have a small 16g that I want to rebuild. Which kit do I get? 16g or 14b? or a tdo5? There's so many out there I don't want to get the wrong one.

Couldn't edit my other post, don't know why. Anyways here's some more stuff and the other stuff. Buy my stuff. Stuff.93 headlights with HIDS. Bought them from another member just been sitting in my garage for the past 5 years. $325obo plus shipping and paypal fees4 bolt with axles and cups...

Great guy! Came all the from Kentucky to pick up the engine block. Smooth transaction, no problems.

Title says it all. dont care about condition cheap as possible. Just not rusted. Thanks

My dad is selling his 91 GSX, manual transmission, with 88,xxx miles on it. It's green exterior and light tan interior. It's not the best of shape but it runs and drives. Everything is stock on it and whoever bought got every option you can get on it at the time. It has factory cd player, abs...

Doing some cleaning. Everything is pick up only. Paypal accepted or cash when picked up.Harbor Freight engine stand. Used it a few times $50.004G63t engine block with caps and crank, been sitting in a outside garage for the past 4 years. $150.00oboFuel sensor brand new in box...

I'm trying to get in to edit some personal information but wont allow me. I get this: Uh-oh, something went wrong! Error Code: 500. The other two I can edit in my home.

What kind do you use? I had a toda racing one and had no issues, but I was looking around and saw the gates makes a racing one too as well.

So my wife has been on my butt about getting the vr-4 done, which I have no problem with . This weekend Im finally getting some frame work done and the rear diff finished up. I've been thinking since I have the car down and saw on ETS's website has bushings for upper and lower control arms for...

Great guy to buy from! Took the time to sell me a bumper on Thanksgiving morning! Thanks for the awesome deal on the bumper!

Just cut 6 pine trees down and we have a bunch of wood. If you live close to De Kalb, Il. then come over and pick some up. Your choice on what you want to do with it make a chair, table, a wheel or chop it up and use it for fire wood. Ranges from large chunks to small logs.

Are these worth getting? They are like 10 bucks cheaper than the rubber ones I find. I'm not going to be full out racing my VR-4 but he says they last a "lifetime". click

Long story short. I finally have some money to spend on my vr-4 to try and get back on the road. The rear camber arms that I got from Andre needs to be painted and I was wondering what kind of paint should I use? I prefer to do it myself and where its done so I dont have to take them back off...

Valentine One radar detector, but used off of ebay maybe 4 or 5 years ago. I rarely used it, just for long trips or going out of state. I used it the weekend before Christmas, went up to Wisconsin. $350.00 shippedNinja Star. Yes a ninja star, bought just because it was cool at the time but...

Im swapping a 4 bolt end into the 3 bolt pumpkin to keep the all wheel steering, anyways is there any seals or bearing that I should replace since ill have everything apart?

I havent done them yet but it looks like there pressed in? It looks like I would need two oil seals, snap ring and the wheel bearing, well double that for both sides. Hubs look fine as long as they come out easy. Anyone know where I can get these parts?

I bought the chromoly rear camber arm from Pina Motorsports and they didn't come with the ball joints so im just wondering where to get the ones that screw in? I emailed Pina Motorsports but never gotten back to me.

Where does everyone get their rebuild kits for transfer cases and rear diffs? Im looking for new seals, bearings, etc. is there anything else I should replace while I have them open up? Also I'm keeping my AWS but stuffing the 4 bolt guts into it. And whats a good gear fluid for them? I heard...

I just want a nice turbo that I can bolt up the factory heat shields so it looks stock but also aiming for no more than 400h.p. so like 375 to 400h.p. I will have supporting mods, not just throwing it in there. Like I said in my last thread about the small 16g and evo 3 the car is going to be a...

I need to replace mine. I bought my VR-4 with out knowing of being in an accident and it was fine when I saw it last like 7 years ago and now I guess where they welding it, its just rusting pretty bad. So anyone know where I can find one at? I've tried google but haven't found one for a 1992.

I have random sockets that I used a few times or haven't at all. First set that I have is standard set that I put together: 1/4" drive 6-point short sockets includes 7/32, 1/4, 9/32, 11/32, 1/2, 3/8, 9/16, 7/16 1/4" drive 6-point deep sockets includes 9/36, 3/8, 5/16, 1/4 3/8" drive 12 point...

Turbos that is. I know I've talked about this before but still looking for a turbo that can get me to 400h.p., well any where from 375 to 400 range. I currently have a small 16g and I've seen someone run I think 375h.p. on one before. So anyone know what kind of other turbo that would get me...

Great guy to buy from! Wish I had more money to buy some more parts. Thanks for an awesome deal Dan!

Looking to buy an a/c belt tensioner for a 1st gen. Mine broke well it was rusted solid and I thought I could break loose and then snapped. Bracket is fine just need the tensioner and bolt.Rob

Looking for an a/c line on a eclipse the one that connects to the condenser to the dryer and the two bolts that bolt into the dryer. The should be in a J shape form.

Ok here it goes.1991 Eclipse GSX with 87,7xx miles Green exterior and light grey interior 5spd, awd, power steering, abs, a/c is still all there and updated to r134a but needs condenser, dryer, a belt and a recharged of r134a It has factory cd player and cassette played, sunroof well a...

I know its ending soon but here are a couple slot cars that I use to play with. clickTablet sold.

I've changed and Im going with a gm 3in. Go ahead and bid! click

Okay as some of you know I'm still dealing with this 1991 eclipse, anyways is came with a power antenna and which I found out it was rare for an Eclipse to come with a power antenna. Well I just need the mast part but when I look at jnztuning and some mitsu parts site theres two different masts...

Well I finally figure out what was wrong with my 1991 Eclipse gsx. The ECU took a dump, how do I know I swapped ecu's with my vr4 and it fired right up. So I had my father in law replaced the caps and cleaned it up a bit. Anyways a week later he gave it back to me and said that it had a lot of...

Yes I need a working non eprom ECU for a 1991 Eclipse GSX. I don't mind others as long as it works with a 1991 gsx. PM me and yes I have a paypal account

Between Eprom and non Eprom ECU's? I found out mine is a non Eprom, and the eclipse is all stock with no mods and Im not going to be modifying any time soon. But I just want to know the difference.

Slot car track set is here on ebay: clickThe model cars here:http://chicago.craigslist.org/wcl/tag/2680543796.html I wont ship the model cars unless you want to pay the flat rate shipping box from USPS that's about I think 11 bucks per box. They don't fit in the medium size just the larger...

Okay bringing this one back. I finally got the car in my garage over the weekend. Like I said before the motor turns over strongly, I had it running with no issues but I left my dad in charge to start it a couple mins a day because he didn't start it one day because he thought the battery was...

This is kind of long.Ok heres what I got going on. For some of you that remember, and after a couple years of JSB, finally finding out about the clutch pedal assembly was the cause of the clutch going out and not only did my dad still drive the car and then messed up the transmission. So now...

I have two model cars for sale, they both have been kind of crushed. They got crushed because I stored them in a bin on the very bottom but the bin happen to be in an attic and the bin, with others, fell over and the weight of the other model cars happen to damage them. Anyways One is a 1994...

Ok stay with me its going to get a little crazy. I need a stud part that holds together the a/c lines on the passenger side right by the dryer and condensor. I have no I idea how to describe it then it being a stud to help connect to a/c lines together, it should attach to the condensor and then...

In dash t.v. for a GVR-4? click

Yes I'm in need of an output shaft for a 1 gen DSM AWD transmission. I would like to get one new but for like 300 bucks I rather do a used one since theres no performance to it.

Don't know if it's anyone on here. click

Awhile back ago I heard people buying the sleeper 16g. If im not mistaken I think it was a 18g wheel stuffed into a big 16g. Anyways where can I buy one or if anyone still makes it? I tried looking at AMS becuase I thought that who made it first but then I saw FP had one out, but their website...

Just a quick question, I need space in my garage and I want to put the motor and head inside the VR-4 with just the 3 motor mounts holding it in. Would it be safe enough to have it just the motor, head and maybe the intake mainfold be holding by the three motor mounts? Or should I have some sort...

Well a few months ago but just put it on. I bought it if I ever put it in a show or something.

I have few things that I have around the garage that I haven't touched in a long time and I need space in the garage this winter.This is a '91 rear center tail lights and there is a small crack(see pic 2). $35.00obo plus shipping and paypal feesStock intercooler and piping for a '92...

So Im not going with a crazy build on mine. Its not going to have more than 400-450hp maybe less. Mainly use is going to be track at times/weekend/summer nights drive/maybe show. Anyways what kind of oil pan should I get? I was thinking stock but I dont know of any that flows better.

Whats the easiest way to get the passenger side axle out from the trans? I got the drivers out and the other times it was easy to just pull it out but this one won't come off and I dont have the fork tool to go through the drivers side. So far my tools are too short or too fat to go through the...

Up for sale is a 2g AWD 5SPD transmission, I was going to put it in the VR-4 but decieded to go a different way. I did buy it from a member on here, and I think he said it came from a crashed eclipse and had roughly 80k to 90k miles on it. Its all stock hasn't been open to replace a part. Im...

Ok so I got everything done from the last thread that I put up(Damn Clutch Issue). Anyways I got the orignal transmission in and got the clutch pedal assembly fixed. Now the clutch works the way it should but everytime that I start the car its in gear and the wheels move, but the shifter knob...

Ok Im putting a engine back into a GSX, and I thought about doing a check list because last time I forgot a few things. So heres a list that I came up with. This is based off a stock 4g63t and off of a 1 gen. Please let me know if theres anything else that Im missing.4G63T Engine Swap/...