For sale are my left-over ECU's. One is a socketed GVR4 ECU repaired and tested by ECM Tuning. (SOLD) Each can be delivered to the SO if you desireThe 2nd is a working and pristine non-eProm turbo ECU ($50 plus shipping)

Time to sell Gwendolyn. Everything completed on this car in the last 2 years/5000 miles. Currently running on 28lbs boost with no issues. Jump in and drive it anywhere. Clean-clear title in hand. No trailer needed, drive it anywhere. 129k on the body. Rust free. More pics and idle video...

Has anyone used this to replace their fusible link block on the battery? I am trying to find out the fuse values to see if they are compatible with our cars. I stole my son's to get my car going, and I would like to return it to him.Evo X Fusible Link Distribution Block LINK

Shipped fast and amazingly well packaged. Parts are better than described.

A the title states, needing the trim above the drivers doors. The part that spans from the A-pillar to the C pillar. Even willing to entertain cracked pieces if they are all there.found some

Started my car the other day and found it is now stumbling on the initial press of the accelerator pedal. If I push it fast, it stumbles and leans out. If I press it slow, it is fine. I verified the TPS is reading correctly and it idles just fine. This started right after being started. I...

Looking for the below pictured part. A couple inches of the factory wiring before the fuses would be nice too. Shipped to 46226

This is a set of steel Brembo brake adapters for use with EVO 8/9/10 front Brembo calipers. I bought these for my son as a gift and he doesn’t need them. They are unused. These fit 1g/2g DSM’s and Galant VR4. If you use the EVO X Brembos you have to use the EVO X rotors and most likely 18”...

Just as the title says. Prefer it with fuses and about 3-4 inches of the small white and blue wires. Unless you have a parts list to replace it with aftermarket parts.

AWD Fidanza flywheel. Still live left in the current surface. Removed from running, moving vehicle. $75.00 Shipped

Help keep me from going to an aluminum welder to have mine welded.

For sale I have ECMLink v3 (full, NO CABLE) in the Galant ECU. This came with the shell I bought, I don't need the extra Link. See pics below, looks like it has had some repair work done. I started and ran my car with it to verify it works.$525 +pp fees shipped with ECU$425 +pp fees...

Picked up 866/1000 shell this evening. Plans are to bring all the stuff from 1025 ( is super clean) and give that shell to my son to take all the stuff from 100/2000. 100 has too much rust. We will strip 100 down and scrap it. The guy I got the shell from my take the front clip from 100 and use...

Need a harness side MAF plug for a GVR4. I have a harness that has had the plug cut off, would like to restore it.

Looking for an EVO VIII MAF setup. (MAF-399, Plug/cable, hard intake)

I have a new issue with 1025. About 2 months ago I popped a coupler @ the GM-MAF. Ever since I have had a stumble/lean issue between 2600-3000rpm. I have changed out the MAF with no changes in what is going on. I am at WOT and it does it. Only seems to be under load. If I knew how to upload a...

PRESENTED BY: BUSCHUR RACING BUSCHUR RACING'S OPEN HOUSE/RACE PRE-ENTRY/DYNO DAY/DRAG RACING-QUALIFIER -FRIDAY, August 18th. 9 am-4pm, rain or shine. -Buschur Racing, 24 West Main St., Wakeman, Ohio 44889 -Local streets will be closed down for the car show/dyno day, it's something you have to...

As the title says, mine flew off sometime within the last 4 days, I need a new one. Color not important.

While getting on the freeway I decided to try and get a WOT log in. The results were not what I expected. Once @ 4500rpm it fell flat on its face (felt like fuel cut), but the logs show over 60lbs boost??2.0l (20 over) 8.5:1 compression BC 272's PTE 1200cc injectors (37 base pressure) e316g...

Richard payed fast, good costomer

As title states. Only used for 200 miles. $150 shipped and paypaled.

Fidanza 6-Bolt AWD flywheel. Maybe 2000 miles on it. $110 shipped and paypaled.

I need the set for the front bumper. Seems the bumper I got for 100/2000 has had them removed

Hello all. I tried testing a different fog light switch on my galant. The wire was pretty short for the gauge dimmer, but I got the old one out and plugged the new one in. Now no matter what the 10a fuse blows when the car is running and I turn on the lights, no matter the switch installed...

I have for sale a never surfaced 4g61 cylinder head. It is complete and came off a running engine with an intact head gasket. SOLD

Hey all, I saved another one yesterday. It is 100/2000 Nile Black. The nephew of a friend bought this off Joshua Mead (AlphaMale) in 2013. It came with a JDM replacement motor installed. We pulled it and installed a motor that made 597 AWHP and a PTE 6262 in it. The guy put about 1000 miles on...

Are these the two plugs from the ECU harness that I can remove if I will NOT be running AC, ABS and Cruise? These were not connected to anything when the harness we installed. I know there is more on the other harness in the engine bay, but concerned with these two currently.

This is a restoration of a VR4 locally here in Indianapolis. Currently there is over 800hrs of work put into the Body,paint and interior alone. There are still some items to restore in the interior and the engine bay. She has been dealermaintained with ONLY OEM parts used throughout...

I need a bunch of these. I found my panels are only held on by 4 clips each. The car wash told me.

I have a Socketed/Eprom ECU from a 1990 Eclipse GSX 5-speed. Does not have the chip. Caps replaced. $125 shipped/paypaled in Cont US. Came out of a running car with DSMLink v2, I took the link.

Found these in some stuff given to me by a guy getting out of the DSM game. Not sure what they are though.

I just installed a factory primary radiator fan connected to the stock harness. Fan runs when the key is on all the time. Would this be a relay or the thermal resistor?

Part shipped fast and exactly as requested.

Pat is a good guy. Sold me some Cam gears, he discovered one had a broken tooth before he shipped it, refunded before I could say boo. Awesome service.

Bought some Evo IX injectors. Exactly as promised.

I am chasing a ECT sensor issue with a constant code 21. Here is what I have found:1. Straight short between the two pins for the sensor (so I believe this is bad) 2. Wiring has been traced and verified good connectivity 3. There are TWO Yellow/green line wires going to 1 pin , the other is...

For sale. 91 dodge colt 4g63t fwd. Beautiful car that I would keep of I didn't have so many projects. This is an original manual steering car. Located in Carmel, Indiana$3500 firm. No trades.Exterior: PPG Lemon Yellow, paint is fairly recent GT trim/wing package Drag DR-17 wheels...

Looking for the vents that run from the heater core all they way to under the seats.

Plate and Rubber grommet for GVR4 shift cables for mounting to the firewal. Mine is missing.

Bought a VR4 fuel pump hanger/sending unit sight unseen. Was much better than expected, shipped fast and packed well!!!!

Ressurecting #1025/2000. Here are the plans,Here as she sits in a sad but rust free state:Here are the plans (many parts coming off my swapped 91 Colt:-On-hand/performed-E316g PTE 680'd ECMLink v3 Full Aeromotive AFPR Wally 255 Tial Q BOV Tial 38mm WG, vented SBR ex manifold...

I got 1025/2000 without part of the rear seat and no front seats. Looking for a complete set. Please be gentle

Introducing myself. I just picked up a 91 Belize Green VR-4 (#1025) shell. Definitely going to be a project as it needs a rear seat cushion and both front seats at a minimum on the interior. Expectations are replace the current 5-lug rear subframe with my pristine 4-lug, sort out the interior...