You could measure the springs, then buy a different rated spring in the same dimensions from companies like Swift. I did this with a set of Megan coilovers, changing out the original springs for a set of Swifts at a different rate (-1K/+1K I think).Feal, for example, ships theirs with 7k/7k...

Not sure why you're not able to PM me. ECMLink is pending sale at the moment.

Prices don't include shipping cost, local Seattle pickup available, also occasionally in the Portland area. Open to reasonable offers and discounting multiple items.Galant VR4 Socketed EPROM ECU ECMTuning repaired (A photos) - $200 UsedSOLD Used Turbo EPROM board, no case (from MD165810) (B...

That's crazy, but congrats on getting it off successfully!

Wow, yeah that sounds like it may have had sealant or something added to the threads, or over-tightened. Its a flare fitting, so it really shouldn't be that tight. It sounds like you're doing all the right things, as long as you're turning it the right direction, I would've expected it to be...

Are you talking about this fitting? What have you tried? Spayed it with penetrant? Is it pretty rusty?

Last call on this setup $100 (the fan alone new is $160). Will take the radiator to the recycler in my next run otherwise and toss the fan on eBay.No longer available, fan on eBay.

Price dropped to $120+shipping.

Can confirm the ETS kit was not short route, I have one of the original full kits.

Sorry for the lack of replies, had some issues with the site. It is currently pending, but will follow up with those that have reached out already if it falls through.

Ended up going a different route with my radiator setup. Bought this used off of another member, worked well for the short time I used it, SPAL fan is awesome, slightly modified to fit past my BOV setup. Comes with the SPAL thru-radiator mounts.Fan Info: SPAL High Performance VA01-AP70/LL-36A...

I've had this a very long time and I will no longer be using it. It's pretty rough shape and priced as such. There are a few missing rubber trim/boots and 1 missing cover plate for when you remove the rack. I always just put the OEM gutter covers back in when I wasn't using the rack, so I never...

Like turbofonz said, also do a boost leak test on everything after the turbo, soapy water and a spray bottle will help highlight leaks you might not even hear.I recently tested my wastegate actuator using a bike pump, the clamp held tight enough around the hose nipple to hold pressure for the...

I don't make that much power and can't speak to other brands, but the SB clutch I have are awesome. I went with the SS pressure plate (2200lbs.) and the TZ-B, both held really well. I've mostly seen praise for their stuff and would definitely buy them again. Hopefully others with more miles or...

Sold

New AMG Replica Grill - $40+shipping BNIB, still in the packaging it was shipped in, just decided on a different grill. Picture: Click Ebay: Ebay Ad Info

Nothing, it's just an extra threaded hole.

Ouch, looks like you're making good progress though. Good luck, that's not a project for the faint of heart!

That looks really nice! I like the idea, my guess is it's just going to be tough with so many people relocating different items in that location (oil coolers, electric power steering, etc.), or keeping their ABS. So you might not get a ton of takers, but if it also fits TELs, you might get...

Hopefully someone with more knowledge can check in here, but I did find this in a quick search: http://www.roadraceengineering.com/clutchandflywheeltech.htmThis info is older and not sure it applies to your situation, so take it all as just on data point.If you want to stick with OEM, have...

Have a huge backlog of updates from the last couple years I have been meaning to post, so I will start working on those in the coming weeks and months...

This is the Build Thread for 254/2000. Reply below.

Selling a set of 4 used black Enkei RPF1 rims for $800Size: 17x8 Offset: +35mm Backspacing: 5.79" Bolt Pattern: 5-114 Weight: 16 lbs.In great condition with installed 949 Racing valve stems in matching black. Currently have bald RE71Rs on them that were used for autocross. You will need to...

Located in Seattle

If you have the old links, I'm sure it can be added to the dropdown again. I actually don't recall the links being in a menu myself, but I probably just missed it :unsure: I just looked at the site on archive.org and discovered the FAQ section for the first time, so I'm not very observant...

Finally swapped to a 4 bolt, so selling my 3 bolt LSD and axles. Ran only Lightweight Shockproof while I owned it, it sounded fine and performed well, but it is used with unknown mileage. Bolts right up for anyone with the stock non-LSD setup, but I do have cups available if you need them.$100...

Looks great so far, nice work! I'm sure the kinks can be ironed over time :D Thanks Chris!

I email or call JNZ with a list of what I need. Josh has been really fast to get back to me with what he can get and send an invoice if I want to order it. Mitsubishi updated their system a while back and JNZ lost the ability to offer a full catalog on their website that we could browse, but...

That looks correct, you should confirm it with an ohmmeter before wiring it up.You may also want to use it to trigger a relay depending on the draw from the cutout. I believe that switch only triggered the fog light relay to run the fogs (FSM should have more info), so it's not rated for much...

It could see a bit more dirt, but its really common for the resonator and snorkel to be removed, since they do restrict a bit. I assume you just mean the snorkel that leads to the filter "box." If so, I wouldn't worry too much about that as long as you keep up on your filter maintenance.When...

Still interested

Sold me a radiator that was in good condition as described, great communication, and packaged like it was a critical component. Shipped fast and packed super well!

PM'd!

Received a smattering of parts from Pot in even better condition than I expected. Great guy, fast shipping, will definitely be looking out for other opportunities to get parts from him.

Bought a few used/new parts and was quick on the communication and payment. Easy to work with!

Looking for a good front right fender that I can pick up in Washington or Oregon preferably. Any color is fine, I don't mind repainting it. Just not looking for anything with a lot of rust or damage/bends.I have a set of beat up JDM fenders I will be parting with once I have the front right...

Pm'd

Spring is pretty well over and I need to free up some space. I've marked the things that I am going to recycle or throw on eBay in 2 weeks. Open to reasonable offers and deals if you're interested in anything. I will be storing the remaining items, so may be a little slower to send anything out...

Thanks for the suggestions, I'll try a couple of things tonight.I tried a gear puller, but it can't grab on the rubber bushing and I wouldn't want it to dig in too hard anyway. I do have one thing I might be able to try there as well though.Will report back with the findings...

Does anyone have suggestions on removing these without destroying? While removing the damper both bushings came out of the damper and left the lower metal bushing that is stuck and integrated rubber bushing behind.I could of course cut them off, but there's nothing wrong with the performance...

By RPMS, do you mean the CAS?

I removed mine a couple years ago and at the time they sat pretty much flush if I remember correctly. They no longer sit flush though, as the process of removing them caused some to slightly bend.Someone with lower mileage might be able to chime in with an example that may not have been...

More parts added, most prices dropped, going to turn into "summer" cleaning at the rate I'm going...

Yup!

Welcome and congrats on the auction win! You might find replies a little slow these days, but there is lots of good info if you search. Look forward to seeing the progress you make.

Bump, some prices adjusted, will try to add more parts this weekend.

Bump

*Marked items that are pending* In general, it's easier for me to track things over PM, but will eventually text those that requested it, but may be slower. Thanks.yubh8tn: Not sure what durometer the Prothanes are, they are definitely stiffer. There are some reviews over on tuners, as well...

Cleaning out my garage, will add parts as I can...Have a lot of parts, prices include paypal fees, but not shipping. Open to reasonable offers and package deals.Good Guy Thread for Reference: ClickPart 3: NGK BPR6EIX Iridium Spark Plugs - $10 Click1 CM (Certified Muffler) 3" Cat Delete...