Who is using one of these and where did you purchase it? I am looking for one, but don't know who makes a better one and/or where is the best place to purchase.I have an older Frank 4 turbo, fwiw, that uses a TD06 turbine, iirc. I mention this as I don't know if these are more universal or if...

My laptop hdd crashed, so don't have the CAPS or anything installed right now, so was hoping somebody may have the part number for the Hood Latch Cable? Does it come in an assembly only, or the cable itself and are they even still available (thought I read somewhere that they were)?Thanks.

Did a quick search but must've used the wrong keywords or something as I can't be the only one this has happened to?Anyhow, went to open my hood the other day to show my friend the engine and the pull handle inside felt stuck..didn't want to risk breaking it using too much force so later on...

SOLD

SOLD 04/24/13My daughter purchased this new a few years ago and had it installed in her 240, but when we sold that car I took it out and don't have any use for it, so want to offer it to somebody else that can use it in their car. It works great and has a lot of nice features click here for...

EDIT - Sold 04/14/13I have a brand new Palm M100 that has never been used and would work great as a datalogger; sorry I don't have an extra cable but they are available elsewhere or here sometimes. Comes with everything you see in the pics below.$45 + shipping

I'm selling these for my son and they are all in excellent used condition (except where noted) and in the original case + manuals (except where noted). I believe all of them were bought new except for the Terminator, which I think he had bought used.All prices are SHIPPED (to lower 48 US...

where do you guys get your copper crush washers from, for the oil/coolant lines on the turbo/engine, etc.? I'd like to get them local if possible, but being metric not sure how feasible that will be and/or what sizes they are; suppose I could measure them, but wanted to see if there is a good...

I'll post/add some more pics later, as my battery died on me.I have two Guess "Waterpro" watches for sale, both in really good working and cosmetic condition and nothing wrong with them, other than need to thin out the inventoryThey both have silicone bands, japan quartz movement...

I've seen a few guys (mostly southern hemisphere) running the water to air intercoolers, but don't recall reading much about them. What I am mostly interested in is their effeciency and cost and is it worthwhile to consider changing the air to air for one.Seems one of the biggest advantages...

As I mentioned in another thread, here is the heat shield I've been working on. It started off as a cookie sheet I picked up for like $1 and trimmed it, opened it up and put silica wrap inside and formed/closed it back up as needed. The goal was to be able to put this in or take it out with...

My Silica wrap came in today (like header wrap but this one is much more HD) and from what I was reading, you are supposed to soak it in water before applying, let dry and spray some silicone coating on it...I was wondering if that spray was something I could buy locally or do I need to buy...

finally getting around to buttoning up the car to start driving it, but one of the last things is painting the valve cover...I liked the original red color and want to stick with that, but I don't recall what shade it was (mine's sanded all down [not shaved]) and the pics I see aren't crisp...

Received this as a gift last year and will never end up using it, plus could use the $ right now (unemployed). Looks like you can use it as a handsfree device in your car, etc. and would be especially nice for those who live in a place that enforces this as a law.It's a Verizon (Motorola)...

My wife bought this calculator new for me a few years ago and while I like it, I never used it. It's in basically new condition and comes with the sealed manual and other (promotional) items it came with, including the soft case. I'd like to get $50 shipped (cont. US) and if you have any...

[EDIT: Item sold 02/28/11...thanks!]I bought this Stiletto 100 radio, car docking kit and arm band (for jogging, etc.) a few years ago for the wife and she hardly used it, so I took it out of her car then used it in the garage for awhile. But, subscription ended and I have XM in my other...

The wife got me some leatherique for Christmas (woohoo) and wanting to put it on soon. However, I was looking at the directions and they stated to put like 4 oz. per seat, by hand and then you let it sit in a warm car for several hours/all day (or you can cover seat and use hairdryer).So, for...

OK, this may be a silly question, but was thinking about this the other day...When you use water or (esp.) methanol injection, does this cause any issues with respect to what volume the ECU thinks is there? I mean, you are adding some volume there (beyond what the ECU 'knows' is there) and...

Does anybody know what the proper gap should be between the front fender and front edge of the door? On mine, one side has a good gap, and the other side is tight and my door was starting to bind. My doors seem to be fine, alignment wise, so thinking the fender is too far back on the tight side...

Well, I was talking about this in another post, so figure I'll add a thread...this is for the GTO (vr4 already has one similar), but thought I'd post it up anyway.Got the (blue) stainless can on sale for $3.33 and had all the other stainless stuff. Made he nipples on the lathe and inside the...

Does anybody know if the hose (like 5/8") that comes off the purge control valve goes to the air intake box (pre MAS) or on the intake tract (post MAS)?The FSM shows it only as an arrow (like a vent) and describes removing it from the intake, but it's not specific if it's the hose or the box...

Alfredo (Peter4) bought a 2G MAS/harness from me and got me the payment very quickly and has really good communication. I know he doesn't have a lot of posts yet (can make some nervous), but I would do business with him again and recommend him...

I will be using an external wastegate that I was planning on re-routing back to my exhaust, eventually. I was thinking of doing this about where the DP bend is...However, the bung for a wideband O2 sensor would be before joining the exhaust back in...I noticed the factory O2 housing (EVO 3...

I'm sure most of you are aware that Tial makes some fine products...Well, I had a great experience with their customer service and would highly recommend them!What happened was my diaphragm was torn. Under further inspection, I found out it was the set screw that came off the nut (that fastens...

Does anybody have info on the following transmission (ID) on my Galant:W5M33NQBK WY2979As I mentioned in another thread, the previous owner mentioned to me something about either the gear was changed, or a different tranny and I'm trying to verify the number.Thanks,John R.

Bought a Forge BOV from Ben (fastasleep) and am pleased with the transaction...Good guy to do business with and would do it again!John R.

Sold me a couple injectors at a great price and they arrived quickly; very happy with the dealings with him and would definitely buy again.Thanks,John R.

I will be in the market for a battery real soon, but it needs to be the type (dry cell?) that doesn't emit fumes, etc. as it's in the trunk and like the extra power and draining characteristics and so on...I've had great luck with my Optima Red and used it in many vehicles for the past 6 years...

I'm not sure how common of a problem this is, but my spoiler mid-section (support) fastener had broken from the plastic, which caused a nice rattle!Anyway, rather than replacing the entire section, I came from the top and drilled a larger counterbore hole (to accept the larger shaft at the top...

Is the dealer the only place to get the O-rings and isolators for the fuel injectors? (I saw the part number in How-to section, thanks Steve)...Can I get these from, say, Napa (I don't like going to the dealer unless absolutely necessary)?I bought some (used) injectors and they came with...

I bought a new leather seat cover from him...came real quick and looks real nice, plus was a fair price...I'd recommend buying from him!

I had a real good experience with Gary's quick shipment and the goods were as promised...plus, the price was nice :-) (I bought a 3G MAS)

Edit: hmm, that is weird, the full size doesn't come up for me...if you click on the image and it is still small, right click and 'copy', then paste into a graphics program and zoom in...nevermind, my browser has this button you have to press to expand itWell guys, I scanned in the magazine...

I bought a hood latch brace from Howard the other day and he not only gave me a pretty good deal on it, but he sent it out right away!...Not to mention, he had good patience with me , when I was deciding on if it may work or not (unfortunately, it doesn't in my case (nothing wrong with the...

I was wondering how easy it was to identify what rear diff is installed in the vehicle? I am not sure if mine is the stocker, or if he changed it to a LSD or a 4-bolt, etc...the 4ws is still intact, but that doesn't necessarily mean anything, I suppose...I see a 3 digit code on the diff and...