Is a pimp. Super fast turnaround on throttle body refurbishing. It's been gone less than a week and I already got it back, holiday season be damned. I got a new 2g ISC on it and got the TB all nice and cleaned up and reset to spec, pretty excited to throw it back on my car and get it dialed in.

Preferably VR4 eprom ecu.

I have a keydiver chip I bought on here, never used it. I'm not going to either so I'm just gonna throw it up here for sale. Asking $40 shipped7800rpm, 11:1afr knock sensor 550cc injectors GVR4 MASI have some other misc. for sale. 5 lug front hubs, uncut front crash beam

Pulled my ECU out to diagnose if it had any damage that could be causing some of the drivability issues my VR4 has had lately. I don't immediately see anything other than those weird streaks on the chipboard, any thoughts?It appears to be a rebuilt 1g ECU, the number doesn't match the ones...

When buying a new coilpack, what brand are people going with? Bosch? I have been looking on Rockauto, may buy a new one for Christmas for my car, but I want to make sure I get the right one.Also it looks like they come in halves? So I would need to buy two in order to completely replace my...

Been having trouble figuring this one out. Didn't do it all summer, it did it once or twice last winter/spring when it was rainy and cool. It only seems to happen when it is rainy for at least a few days.Car runs and drives fine. Sometimes the engine light will come on (only does it on the...

Anyone have bitcoins chillin around in a wallet they're not using? Let me know.

With attachments to fit to thule crossbars. Anyone out there got one?Thanks

Post em up, I'm just curious. Going 5 lug soon and need some winter wheels that aren't steelies.I'm surprised there isn't a thread of this already.

I have up for sale a set of 4 stock nile black 91 wheels with stock size 195/65R15 Cooper weathermaster snow tires. These snow tires are really good, have got me through some deep snow and up and down some steep hills with no trouble at all. I snowboard, so having my car be winter worthy is...

Anyone have a full set, front and rear, they have laying around they aren't using? NEW please. I'd have to mix n match through rock auto and I'd rather get them all one brand. Just seeing what's out there.

I have an Ipad mini 16gb wifi only non retina. Everything works, but it needs a new screen as its cracked. You can replace it for about $60.Asking $80 shipped SOLD

Made in Japan by Japanese people. No emblem. Some damage. Free for cost of shipping, so $25 shipped. DM for paypal.

I had to remove my foglights to fit my intercooler piping. I'm curious to see for those of you who had to do the same thing, what foglights did you put in? Looking to see what aftermarket fogs fit in there and don't look ricey. Post up.

Ok so, here is my current setup:16g megan o2 housing 3" custom turboback to 3" high flow cat to 3" magnaflow mufflerI get a lot of drone over 3k rpms and the exhaust is just loud in general. I am looking for suggestions on how to quiet it down, looking for a resonator brand someone has...

So I did some wiring work on the car today, did my fuel pump rewire, and fixed my busted coolant temp sensor wire (to dash). I was inspecting the other wires and my coolant temp sensor wiring (to ecu) is quite crispy. I want to replace it but I don't think I can without replacing the harness...

Can't find one to download, can you share?Much appreciated

Got some parts up for sale.-Lower intake boot. In perfect shape, although dirty. I will clean it up some more before shipping. Includes the little rubber gasket that fits around the stock turbo. $30 shipped.-90 OFH. Got this from Brett but it's gonna be a while before I need it. Not...

So I am getting a weird squeal/screech when I floor the car in 1st or 2nd gear in the upper RPM range only. It happens for less than a second, and I can't figure out what it is. It's coming from the driver's side of the engine. It doesn't do it in any other gear or speed or part throttle in...

Anyone out there got anything good? Looking for a simplistic VDO style gauge, nothing fancy. Ready to install would be preferred. Show me what you got.

Let's get this rolling. Post your free stuff in here. If you want any of my stuff, pay shipping.-GVR4 stock midpipe, no rust -GVR4 stock cruise control, worked fine -GVR4 stock muffler, some rust -GVR4 air cleaner lid

So I'm picking up some stuff for my car this sunday:-Big 16g -Evo III manifold -Megan o2 (attached to turbo)I'm curious about the o2 housing. Any opinions, information? Worth running or should I just use my stock o2 housing? I always like to hear the hardline VR4 forum opinion of...

Can anyone help me with these? I need:Heater Core hoses oil cooler hoses turbo feed hosesAny others in there I missed. Basically all those little misc. coolant lines that need to be replaced. If someone can order them, I can purchase them from you today. Bobdole? G?Thank you

Looking to hear some opinions. I won't have time or money to send anything off for powder or ceramic coating, just want to use something I can get locally. I want to paint:-Water pipe -heat shields -possibly o2 housing, turbo exhaust housing, exhaust manifoldThose last 3 are a big IF...

As subject says. What you got out there?

So I've got everything undone, the water pump is off, but I can't get it out between the body and the engine. I've tried everything, raising the engine, lowering the engine.. what's the trick? I feel like an idiot for asking but I seriously can't get it out at all.

So I'm pretty much done with power for now until I get my new engine put in, and even though I'm only running off stock wastegate pressure (removed BCS) I would like to get a boost gauge. I would like something that would link up with DSMlink, but I guess that's not really terribly important. I...

Want to run my 2g maf on my stock turbo for now, eventually will step up to a 16g or similar. Id take a 2g maf conversion harness too if anyone has one. I'd be interested in other maf setups as well, evo, 3g etc.Need injectors that will just swap in. You don't want me changing harness plugs...

OK so my intercooler piping will not accommodate these, so away they go. Both work fine, driver side lens is cracked. Both lens have pitting/wear as you would expect something that low to the ground would receive since 1991.I will post updated photos tonight. I can include the mounting...

I know this topic has been beaten to death, but has anyone bought a kit that is for sale on summit or elsewhere instead of piecing it all together? Next month I am going to take care of a lot of small things for the VR4, a battery relocation is something high on my list. Someone recommend me a...

Couldn't find, searched. Anyone know the dimensions of the decal that goes on the rear doors?

clickAnyone going to this? It's at Alki beach in West Seattle at 6pm. I think I'll cruise on by for a little bit, would be cool to meet some other local VR4 guys. There's a decent number of us, maybe we should have a meet of our own.

Anyone got one laying around? Basically one to connect my 3" intake pipe to the stock air can. Otherwise I'll just Amazon.

I need 2.

clickJust seems to have started a day or two ago. I don't hear it when the car first starts or after I've driven it a short distance. Once the car is warmed up and I have driven it 10 miles or more it makes this sound. I can only hear it at idle. Pretty positive it's coming from under the...

Bam. took 5 seconds. Should I angle it for more horsepower?

Someone set me straight on the differences between these two. Is the FP worth the price difference? Is it just the highest flowing non tubular style manifold?

So I know most of you guys dislike it but I am curious on some opinions. Thinking about dipping my car for a year or so for fun until I can address bodywork and paint. What color would you go with? Mine is black, I'd go black again but want to stay clear of matte colors since they look cheap...

Dimensions:12" tall 27" wide inlet to inlet 2.5" inlet diameter 3" thickAsking $100 shipped. It is currently installed on my car, I ordered a new core today and will likely install it this time next week. So if you buy this I will be unable to ship until next week at the earliest.

Got some stuff for sale.Downpipe in good condition, minimal rust. Asking $50 shipped. I can include hardwareStock muffler also in similar shape. Bolt holes to midpipe is a little rusted (I cut the midpipe to remove) but I can separate or sell as is. Asking $60 shippedStock...

Has anyone put one of those truck mounted bike racks on their car, that fits over the spoiler? I have a roof rack but I hate to put bikes up there. Mostly laziness, but also don't want to risk damaging my car.

So, my friend works for a company that specializes in fabricating things for turbo volvos, he is curious to know if there are any in demand parts that could be made for our cars? I couldn't think of anything that isn't already covered except brackets to fit Evo brembos on the rear of our cars...

shut up, I changed my mind.

I'm changing my oil filter and want to snug up the bolt that it threads onto, I don't have the right socket so I want to make sure I buy the right one. What size is it? Thanks and yes I'm stupid.Previous owner had the oil filter on so tightly I had to destroy it to get it off.

Been thinking about tint, would like to get mine done eventually. Nothing crazy, probably 30-35%. Post a picture of yours for everyone to see. Any darkness %.

Condition of the MAFT setup unknown. Purchased from Paul (thedsmguy) on here in presumably working condition, but I never used it. I am going in a different direction with my setup.I will sell outright for $120 shipped. I take paypal. PM for paypal address. Pics to come later.

what's it take to throw fireballs? After installing my 3" turboback, when I rev it up high in gear and shift, I get a big *POP* out the back. I don't have anyone to confirm, but a 3" exhaust on my otherwise stock engine 240sx would throw a fireball with that same *POP*. Am I doing the same...

Is JNZ the best price? I am looking to be a cheap ass and find it for the lowest cost.

In good shape, no rust. Cat works, passed WA state emissions no problem. Will separate pieces and sell separate if desired. I can include mounting hardware.Let's start at $100 plus shipping for the whole shebang.

Ok so I will be swapping to 5 lug. I want to do the wheel bearings while I'm in there, but I have a question. I see an inner and an outer wheel bearing available to buy, are there two wheel bearings to replace on some corners? Also two wheel bearing seals? What should I buy to do my 5 lug swap...