Genuine Intel Mobile Quad Core Sandy Bridge i7 Processor 2630QM - Working pull from an Asus G73SW I purchased new from Tiger Direct last fall.This processor is in perfect working condition - I just upgraded to a 2760QM. I did the install/pull myself - I am a PA State Certified Comp/Sci Tech...

Price: $740.00 Payment method: PayPal Item condition: 10 Preowned equipment, but appears as new Shipping instructions: insuredUsed for about 200 pictures. I previously owned the Nikkor 14-24mm and this is its equal at half the price. Great lens - love it - but need money due to holiday...

Gorgeous 2001 Harley that has been meticulously maintained, garage kept under-cover, and customized very tastefully. This is the FXST Softail Standard edition with the following mods and upgrades:- Chrome Samson Pipes - Forward Controls - Chrome Rocker Covers - Chrome Custom DRAG Wheels...

Nice 14b cartridge and compressor housing - some play but good for price. $65 shipped.EvoIII td05 turbine housing (nickel) - super lightweight. Big upgrade for any 14b or 16g. Has been ported professionally and once received JET coat. $65 shippedMHI td05 turbine housing in decent...

Nice set of 264 intake and exhaust cams. Come with cam gears and new seals.Paypal welcome - cams in New Orleans...Colin

I spent over $500 on these books to get my Divemaster training a few years ago. In great shape - a couple have some writing in them.Open Water Scuba Diver, Advanced Open Water, Rescue Diver, Divemaster, Encyclopedia of Diving, Dive wheel, Tables, Underwater Photographyt etc. and a half dozen...

car available as rolling chassis WITH:Good 6 bolt bottom end, non turbo oil pump, aluminum crank pulleyFantastic smooth shifting awd 5 speed transmission, front axlesACT chromoly flywheel, new act street disc, ACT 2600eibach springs, koni and agx struts which have only seen track...

Would like the 5 lug swap and tight 4 bolt lsd rear end to go to a nice Vr4 - this laser is located just north of pittsburgh. Car originally from southern Virginia and is rust free.All parts are about a year old - car has been in storage while I've been abroad. Only been to track once...

Been here long enough to deal with my 4th hurricane (Dick) and see this sweet Galant.Hopefully going diving this weekend.Still waiting on work papers...

Jake (Olson) and I met up in SLC to drive the beast over for his wedding in Kenosha - roughly 40hrs road time - and somehow he ended up married after all...

Mixed driving (3/4 highway) in a 92 awd laser. Weighed it the other day (it is a street legal car - F+R seating still - basic chassis diet, almost everything eliminated from engine bay...) - it weighs 2620 without me in it, so it is pretty light. I ripped on it a few times over the last week...

The car runs like a raped mongolian. 14b with lotsa boost. Looking for dyno and 1/4 mile records. Lotsa weight elim - car weighed 2620 the other day (no driver) with a packed camera bag, passenger seat and misc tools & electronics. More weight to pull over winter. Few more parts to get...

Idled fine prior to cam and lifter install - nothing else changed. simply can not get the car to hold idle. BISS out all the way, tried adding/subtracting fuel on safc, even screwed in closed throttle position switch to see 10% throttle and it simply mugs down and dies. Keydiver chip set to...

I threw in an ACT Flywheel, a custom 6 puck "unsprung" disc (clutch.net) and stock pressure plate -WHAT A SWEET SETUP.I am sure people have done this in the past - my impression:Driveability: 7/10Pedal Pressure: 10/10 nuff saidDoes it Grab? 10/10 cuts the front tires...

at 14v what does a 255 take the base fuel pressure to on stock fpr?? waiting on my adolescant ecu to get finished so I can slap in kadaver chip which has 45psi bfp setting. I kinda remember reading somewhere 8 years ago it took it up to 50 something...I've searched a few forums including rre...

This thing sounds like the Polar Easterlies exist under the hood when I build boost. It has me paranoid - Car has plenty of vacuum. checking all couplers (brand new sbr fmic w/ t bolt everything and piping) - tb isn't leaking. Just wanted someone to confirm that a 2g intake mani sounds like...

Motor had good compression - 150 on all 4 prior to tear down. installed head gasket & almost new 264's and mudd. 4-3-2-1 is 80-130-80-130.Lifters are original - 160k - are they taking a dump with these cams?The car runs like crap. IT IS IN PERFECT TIME. With a general tune today through...

running stock setup now - already had it apart. few miles on oem, replaced by previous owner - not sure if flywheel was machined - could be cause of slippage. Disc, fly & pp in perfect condition - no glaze.can't do 1-2 shift @15psi w/o slippage into 2ndcheap and local solutions:6 puck...

Sorry fellas but I gotta post here and get this fingered out -92 laser - windshield wipers and pisser won't work because amidst my hacking I eliminated the relay which resided on the driver's side wall behind the driver's seat.I called the dealer and the correct relay is MB510925 -w/...

Ok - went from 155-170psi on all 4 (checked twice) with a head warped 9 thousandths pushing coolant...Had head trimmed 8 thousandths and cleaned, new topline composite headgasket installed and now:145-150psi on all 4bottom end and everything else the same. Head torqued to 75 ft/lbs on...

Just took some pics of my crap (new donor car thread) - figured I'd post up something nice.My friend Joe's setup - some top secret internals from numerous sources - he works with Slow Boy Racing, gets hooked up continuously so he trickled down some guff to me. Pretty neat. Will make 500fwhp...

Stock 1992 Laser from Richmond, VA - 150k w/ rebuilt motor. $1100. Couple new stock parts, good tires, brakes, body, smooth tranny, etc. Tore it down in the last day with no major surprises. No rust anywhere. LSD 4 bolt rear end, 6 bolt block, non abs, 5 lug - anything else this car is good...

Got the new car (stock 92 6 bolt 4 bolt) for $1100 - drove 500 miles back to Pittsburgh and upon proper inspection noticed the front engine mount snapped off and took a chunk of the block with it. After talking to Curt Brown I am considering just eliminating the mount. The engine is solid...

Sorry - Counting Crows quote...Anyways - perhaps I am certifiable ???

Well, thought I was golden on a 6bolt 4 bolt dsm swap candidate for cheap.Supposedly rebuilt longblock with 3A valvejob, ARPs and new pistons - 5k on new motor. Runs/pulls hard. however compression told a funny story.I was not there. My guy mentioned 110 110 110 150 psi - spoke to owner...

Looking into driveshaftshop.com - anyone have dimensions or has one for sale? What's the price new?I've seen pics and I believe these are one piece - anyone with under car pics with it installed?What's the expected lifespan?Thanks - Colin

Just curious about what Olson told me - he has Link with fuel mods and stock fpr on his setup - and he's getting decent highway mileage (30mpg apparently).I was under the impression to obtain decent mileage w/ upgraded fuel pump you needed an adjustable fpr keeping base fuel pressure down...

in the archive: the old 14b comparison pic lol...SleepyVr4 old school pics...

Stage 1 Weight Reduction:Basic GVR4 stock parts (including engine) to eliminate/modify to reduce weight without compromising safety, emissions, driveability, or anything else "normal"...1. ABS to non-abs - Click here for how to...2. Power Steering to 1.8 manual rack, or simply...

On a quest to find the lightest Vr4's out there - list only if you've been to the scale (with or w/o driver). Also list any major diet plans you've given your car...What the hell list a 1g/2g/evo if you feel left out or care...(Trucklants weigh as much as a luck dragon )...

I believe it is the VW Scirocco rad - griffin all aluminum for $200. I want to get some ideas for brackets and check out how people have the hoses run. Thanks - oh, I did find this (but more would be nice ):

I thought this would be a nice thread idea. Post pics of yours or other peeps gvr4's launching!

Hope this helps someone out. I know there is a lot of variations in MAFT versions (this manual is for 2.01), however, a friend called me tonight inquiring about the error codes (they may be the same?).here also:click for more good sh*t

I didn't have any definitive answers on this when I did it. Hopefully these pics help someone out...

OSTRICH $175 clickostrich installProduct Description: This is THE standalone USB emulator. It might be the ONLY one. It will emulate 2732A, 27C128, 27C256, 27C512, and more! Up to 4mbit (29F040) 8-bit emulation. Robust, USB-based realtime EPROM emulation in the palm of your hand! Battery...

Calipers media blasted and painted w/ 500 degree duplicolor engine paint. Rotors are brembo blanks and the pads are axxis ultimate ceramic/kevlar pads. My friend bought this setup for his Si, and I was extremely impressed so I bought it up. I picked up evo8 wheels for a good price so I...

A friend of mine recently went to Wyotec for chassis fab, and while there he got the chance to port a 4g63 head and flowbench it. His results are here:http://dsmtuners.com/forums/showthread.php?t=170275Well, I was having my head freshened up at the machine shop, so he decided he wanted to do...

Well, amidst all the other crap I'm doing I find time for this. Really I'm just trying to understand how the jdm headlights work electrically, as this thread amongst some others has me debating how I am going to wire them:JDM WiringSo there's 3 types of JDM headlights. H4/H4 with...

I guess jeff isn't doing it, I refuse to, but I think the dsmlink peeps are doing it. Anyone else?

http://www.are.com.au/techtalk/intecoolersMR.htmalot of you probably saw this already - but I thought would be a good post for newbs...

September 1990 Car and DriverFebruary 1991 Motor Trend

hooked me up on a GOOD rebuilt 14b w/ exhaust housing, o2 housing, and o2 sensor for $75. Honest guy. [ 09-03-2004, 07:15 PM: Message edited by: turbogalant ]

To start things off, you will need the following: - a few bottles of brake fluid (high grade) - non-abs proportioning valve from awd dsm - non-abs brake lines (4 lines total) - stainless brake line kit (8 line kit) - 10mm line wrench - I used crapsman - 10mm, 12mm, 14mm, 17mm, 18mm...

To start things off, you will need the following: - a few bottles of brake fluid (high grade) - non-abs proportioning valve from awd dsm - non-abs brake lines (4 lines total) - stainless brake line kit (8 line kit) - 10mm line wrench - I used crapsman - 10mm, 12mm, 14mm, 17mm, 18mm...

wow. I lent my friend my hallman mbc, and he didn't tighten it after adjusting the knob. Screw/knob and spring fell out. I emailed hallman and mentioned this to him. That was all. He asked for my shipping address. Couple days later I got a brand new screw/knob and spring. Hey, that's...