Hello,I have an eprom ecu board here with an strange problem.TMO logger can Connect with the ecu. I See „federal ecu“ in the first screen, I can switch the fuel pump on.One driver ic is bad , I think it was 105, is dead. But i have no isc so thats no problemBut car wont start. Battery...

More amps are always good 😀

I found the part even cheaper here local in Austria. 😀

Yea it‘s a very nice car. Had the same, but as an E88A2,5L V6 DOHC N/A, 175hp and 4wd 4ws with Electronic ride Control (soft/sport) when I was 18… dumbass sold it bc i dont know how to repair/ maintenance..I hope you enjoy this very cool car ;)

Hello. I dont know if they ship international, but here is the part from germany for example.https://www.partsbit.de/autoteile/fensterheber-tur-hinten-rechts-3835104.htmlRear rightGreetings

No this Radio should work without an amp. I had the same connectors in my wiring loom.EDITFound the pinout, from 3000GT Radios

Hello, i found in my Parts storage an MAF Sensor. It has an 7 pin plug compared to our N/A 6pin plug i often seen here.It also looks bigger than my other MAF with 6pin, especially the unmetered lower part.Is this die the same size like an turbo maf?

Thank you. I will try that. I use Pin 23 from the ecu (maf Supply 5V).EDITI tried it and all led‘s are working;) thx

Is there any way to test this boost gauge? I want to use this in my EU Galant, but i dont find many informations about this thing. There is one wire missing from my ECU connector (PIN3 Turbo Gauge), but are there other things what i need to change?Thanks

Sorry,I know its a very old Thread, but were is the buzzer hidden? I forget the light sometimes and mine Dont make a noise..

Hello,anyone has the whole clutch and breakpedal stuff for sale? I Need the whole thing because i want to go for an hydraulic system.. 4g32 has a cable type. Needs to be shipped international to austriaGreetings Martin

Follow this line and you find the clutch slave cylinder. There is a bleeder.

My 1989 has a cableIf you have no fuel in the Reservoir Check under the floor inside the car..

Looks great!! I hope international shipping is possible too, I would take 2

Hello,i did the ABS delete a time ago (abs unit out, new prop valve on the firewall and new lines for the fronts) and now i want to install SS breaklines. Now a rear hard line broke and i found something new. There is a rear prop valve and a abs delay block. Should i just uninstall both and...

Yes i need to close the hole from the clutchcable.. i hope i find an rubberplug in my Part collection that fitsShould i do the fuel line new with polyamide tube? I think that would be easier.

Okay. I have a complete ECI car here. GTi 16V with many many rust. (common problem here)And the carb is, unknow why, with not rust.1.) Swap whole drum brake rear beam for disc brake beam I have an complete rear axle, ebreak cables and want to buy SS break lines too. Front breaks are...

Hello,i have an Galant with the 1.8L carb engine that i want to swap out with an 4G63t from my rust-killed car. So i need to change the breaks (rear only drum), cable clutch to hydraulic, wiring loom.. and i need an elctric fuel system.Carb engine use a fuel tube with clips for connecting...

Luckily i found 1!! OEM speaker15W 8Ohm MB509486Here in europe we only got speakers in the dash afaik. On more expensive models they got rear speakers too. But nothing in the doors ;(i tried it in the car and it sounds the same or slighty better than the cheap coax speaker. Less...

No, every galant i got didnt have oem speakers. And the label on the radio only tells me the Part nr. Serial nr and Dolby information.

Okay thank you. So i need to get good 4" speakers. I dont want to drill any hole for an additional tweeter or else. Any suggestions for some good coaxial speakers?

Hello,i finally got an oem radio with cd player. I want to know, anyone knows how much Ohm the speakers need? I only have aftermarkt speakers front and rear with 4Ohm, is this enough or do i need 8Ohm per speaker? I dont want to toast the radioAnd i dont have the original radio mounting...

Nobody ?

Okay, martinmalits @ gmx . at

How much do you want and do you have pictures?Greetings

Hello,Im looking for an original radio. I don’t know if there are different versions, i know there is one with FM/Tape and CDIt need to be shipped international to Austria.Thank you Martin

Thanks, thats great

Hello,can anybody show me a picture were i can see the location for the mounting holes? I have an 88' model without spoiler and got an spoiler with the 4 mounting studs (one left/right and two in the middle)Thank you

Still looking for the stock compressor outlet.

I only need the J-Pipe and the hose from the BOV to the intake

Im also looking for an turbo- throttle body. i dont need the ISC mounted.Greetings

Helloim trying to complete my intercooler stuff.Im looking forMD136077 J-Pipe MD162663 Hose from IC cold side to metal pipe ???????? Hose from BOV to intakeanyone have these things laying around and want to ship international?Thanks& Greetings

HelloAnyone has the stock hose from the aircleaner box to turbo hose for sale?Greetings Martin

So its going on.. But i have a problem. Ecu throws codes:P0183 Fuel Tank temp P0340 no camshaft signal at EFI ECU P0335 no crankshaft reference Signal at EFI ECUI checked the connector under the hood, 2 wires go to the ecu Pin 88/89, 2 have +12V.Car starts without problems, it...

Im looking for the same parts. But it dosent matter if its the bigger or smaller IC. If anyone have the parts and would ship international pls pm me.Thx

Is The 16g for sell without exhaust housing and the other stuff?

Do you look for this part?

Okay, im still waiting for the 1.3U cable and the knocksensor...

Ok thank you !

Ok thank you for ur help, i finally got an 1860A118 from an evo. =) I also built an adapter cable already.Do i still need the resistorpack in the loom for the injectors?Greetings

Helloi want to ask if anyone know what ecu i can use for an "evo8 ecu swap". Must it be an Evo 8 ECU like the MN132874 or can it be another one used too? Like these i found cheap on ebay:MN156916 04 Lancer Manual MR988331 03 Lancer LS MN132618Thank you allMartin

Okay thanks for that information! But i would buy it without badge too.

HelloIm looking to buy an grill from a 4x4, maybe anyone have it for sale and would ship it international to Austria. The red one im searching. I can pay with PP.Greetings

Bump, Still Need them

Hey guysim searching the OEM Turbo Outlet (MD127467) and the Intercooler hose (MD125954)Please with complete price (shipping to Austria, 2325) and PP feesThanks

Sorry. i forgotBIG Thank You

So.I checked the 441.binThe string started at "294E" with D5 and endet with 5A at "2951" i changed it to 01 and it worked No CELThan i looked at the 901.bin There is "D5 40 39 8F" at this position.Im a bit confused, i had a eprom ecu befor and dont need to modifiy this?!

Me again.I just tested 2 Roms.E441 (from Dynamic 4/ 4G63 NA with 4WD and 4WS) E901 (from GTi 4G63 NA with FWD and ECS)on both it idles fine but gives me CELand on my ECU connector Pin 13 for "Control Relay (Fuel pump drive signal) is connected ?!here is a pic from hex editor, is this...

Ok i will look on this and than we will see Or i test the E901 GTi Rom.

Hello,I had bought an EProm ECU for my Galant E33 (4G63 DOHC Front Wheel Drive) and installed an Ostrich 2.0 with stock E33 rom. But if i start the car with it, it runs fine but gives me CEL and stored Error 42. 42 is for Fuelpump afaik. If i swap back to stock Non-EProm Ecu there is no error...