The Authoritative Galant VR-4 Resource

Join the best E39A 1991-1992 Mitsubishi Galant VR-4 community and document your GVR4 journey.

  • Software Upgraded - Reset Your Password to Login
    In order to log in after the forum software change, you need to reset your password. If you don't have access to the email address you used to register your GVR4.org account, you won't be able to reset your password. In that case, follow the instructions here to regain access to the forum.

Search results

  1. terminals and connectors

    Been a while since I cleaned up my wiring in that area. Since I don't trust my brain to accurately recall information prior to yesterday, here's a video that may help - Making an Engine Wiring Harness (89-94 4g63)As for terminals/connectors (if needed), have you looked up Ohm Racing or...
  2. EVO 3 radiator in your vr4

    @Bonecollector It's a 12" FAL123 (with the logo plate flipped) - https://flex-a-lite.com/12-1-8-inch-lo-profile-s-blade-puller-electric-fan.html I'm also still running the stock pusher fan. As for the Koyo, mine is the 2-row 48mm core - HH030561 ...but there was a 53mm race core option (also...
  3. EVO 3 radiator in your vr4

    I also have a Koyo Evo III radiator. My overflow line route is similar (not much else you can do unless you move the tank).I went a different route with the sensor and had a bung welded on in the stock location.Other minor tweak was that I had to grind down the fan mounting standoffs on...
  4. I have E39A tein camber plates, do I have more options for coilovers now?

    Here are the adapters you'll need (to avoid the rear welding option)I used that complete set when installing evo Ohlins.Other items to note from my experience: You'll need spacers/shims for the front lower mount when using evo struts or coilovers since they're a little bit wider than our...
  5. WTB old digital tuning palm data log cable.

    If you can't find a cable, you can try making one. :)https://www.dsmtuners.com/threads/how-to-set-up-mmcd-make-a-logging-cable.203316/If for some reason the cable doesn't work with PocketLogger, you can still find MMCD for free.Good luck to you!
  6. Aftermarket Support

    Short answer, yes.I have Ohlins Road & Track coilovers for a CT9A installed on my E39A.To make them bolt in, I used the following items: SCE adapter kit for the rear lower mounts, E39A camber plates from BC for front upper mounts (replacing the CT9A plates), and some slightly longer camber...
  7. WTB: GVR4 stock, complete, turbo back exhaust system

    I know this is a long shot, but I'm looking for a STOCK Galant VR4 full exhaust system (turbo back) in good condition. Downpipe, cat, piping and muffler ...everything.If you have anything I need and are willing to ship to CA, please let me know your price.Thanks!
  8. Palm solutions

    Holy 20 years ago! This made me dig through my archives - found my my old pocketlogger software and some logs (but the OBD2 version since I had a 2g back then). I'm thinking the free version you mentioned may be MMCD. http://mmcdlogger.sourceforge.net/
  9. Looking for front door card removal tips...

    Success!Figured it out. The issue was two-fold.Along the top of the panel are metal u-clips with teeth. See blurry photo...Those had really dug into the door!I had to get a small hook in there and really pull up hard before they let go....and my second issue was a piece of vinyl...
  10. Looking for front door card removal tips...

    Yeah, the poorly focused old phone just doesn't capture as much detail as I'd like.That's just a plastic washer that has become one with the panel (like the one above it).Here's what you spotted ...(minus the screw)Anyway, gave it another go this morning with no luck...
  11. Looking for front door card removal tips...

    Quoting pot: Good morning. Based upon your notes I will add before you begin to push upward, you need to begin by prying preferably with a plastic trim tool outward starting at the bottom.*There are three or four black plastic squarish tabs that the door card must clear which can only be...
  12. Looking for front door card removal tips...

    Quoting 467: Service manual chap42 pg76 clickThanks for the link.I probably should have added that I have the manual and referenced it yesterday to make sure I wasn't missing anything obvious and confirm the location and style of clips. Beyond that, it wasn't much help....also spent...
  13. Looking for front door card removal tips...

    I expected that removing the door card would be pretty straightforward, but I was mistaken.I have been defeated and am now asking for help.Here's where I'm stuck...Looking at the picture, I've removed the following: Triangle/Sail panel Two screws on the left side of the panel (upper...
  14. PCV catch can question

    Not a barb, but JNZ offers a 6AN fitting that replaces the PCV valve. click
  15. CT9A Ohlins & E39A Camber plates

    Yep.BC sells parts - clickI ended up using the bare BC camber plates and their rear brake line bracket with the Ohlins.Probably need to call for the rear brake line bracket as I don't see it listed on their website. I'll post pics of all this stuff later.
  16. CT9A Ohlins & E39A Camber plates

    Just a quick update.Swapping over the bare BC camber plate works.There is a difference in thickness of the two plates.The BC plate measures 8.15mm thick while the Ohlins plate is 6mm thick.As a result, using the thicker BC camber plate means the supplied camber plate screws are not...
  17. Source for knock sensor

    I wonder if they truly have any "in stock." I added 99 to my cart and their website didn't complain. I highly doubt they have that many available. I'd suspect their site doesn't properly track inventory or suppliers.It doesn't look like anyone is making these knock sensors anymore.I...
  18. CT9A Ohlins & E39A Camber plates

    Thanks. Also quite helpful.Additionally, I've found some measurements for the Ohlins CT9A Plate.While that doesn't have the resolution I'd like, it's enough to scale and take some measurements to compare with the BC plates. ...and it's looking like I may just be able to swap over the...
  19. CT9A Ohlins & E39A Camber plates

    Found it here. ...and I recall reading through it quite some time ago.While the information likely won't apply to what I'd like to use, it's still helpful to see how you worked out a solution. Thank you.I'll likely attempt to adapt BC camber plates to work since I have a pair and...
  20. CT9A Ohlins & E39A Camber plates

    I'm wondering if there is anyone here that has a set of CT9A Ohlins DFV Road & Track coilovers installed on their GVR4.I'm aware of what needs to be done to bolt evo suspension bits onto our cars and that if I wanted to retain the evo camber plates I'd need to drill new holes in my strut...
Support Vendors who Support the GVR-4 Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications RixRacing RockAuto RTM Racing STM Tuned
Top